600cc Golf Cart Build

Рет қаралды 10,083

Жыл бұрын

Possibly the most sketchy CBR swapped golf cart in existence. Welds that are questionable, tires with way too much traction, and a whole lot of rpm to throw in the mix!
If you are looking to watch the first two build videos on this go check out ‪@JunkyardDigs‬ for the 600cc DEATH TRAP videos!
Follow me on Instagram - @pabriggs
Follow me on Tiktok - pheonix747
#golfing #auto #motorcycle #motorsports

Пікірлер: 58

@kellyrainwater8637 Жыл бұрын

😀Give me more, more more of that golf cart!

@Popeyes66 Жыл бұрын

Looks like Fred Flintstone's car,but is self propelled

@trythistv Жыл бұрын

This thing is legitimately terrifying, likely if you look up the definition of "deathtrap" they have a photo of this golf cart, but also... I wanna drive it. Feel free to do as much as you want with this thing, it is incredibly entertaining, just please be careful!

@johnberg12 Жыл бұрын

The $100 whatchamacallit

@garageofscrap Жыл бұрын

I only just noticed the “closer to the end than ever” sticker on the dash. Very fitting I’d say

@trashflood7883 Жыл бұрын

Need to figure out a linkage to use the clutch stick as a shifter

@vincelamarche9686 Жыл бұрын

If you rejet the carbs to match the exhaust and air filter it will actually be a lot more fun to drive. It's running pretty lean right now.a first gen(87-90) hurricane would need to be bumped up to 35 pilot and 105 main and one shim under the needle, If it's a second gen cbr600F(91-94) go 42 on the pilot and 140 on the main and shim the needle one washer and it should be good to go.

@tkskagen Жыл бұрын

Having a wider Rear stance (Axle) would greatly improve stability...

@donaldhalls2189 Жыл бұрын

I recon you should TURBO it send it down the quarter mile, that would be interesting, thanks for the video, or and maby widen the rear wheels, all the best to yous and your loved ones

@mrshaneyt43 Жыл бұрын

Share as much golf cart as you like . That’s thing is just crazy and always brings a smile to my face . Great stuff😂

@sc-sp4cm Жыл бұрын

still no brakes, ... i came over from Junkyard Digs,

@Eirik_Eiderdrake Жыл бұрын

Nice job man!!!

@jeffdianebald Жыл бұрын

Love it!!

@christopherlind Жыл бұрын

Love the video keep it up

@bensymington5550 Жыл бұрын

Very cool I seen this on junkyard Diggs

@Firecul Жыл бұрын

Might have to fetch the rear calliper from that jump also lol

@miket8909 Жыл бұрын

Need some heavy duty rock sliders to add more weight low down

@matthewduckydoormattmanzel2624 Жыл бұрын

I will say we need more, and lots more of this cart/thing. Also more odd builds or crazy one off unique builds.

@calebv9014 Жыл бұрын

Could you reverse the plastic air box on the metal portion? It looks like that could put most of the air box to the rear and maybe gain you 8 inches or so for the center console.

@wrenchin-redneck Жыл бұрын

Tried it, bolt holes don’t line up unfortunately

@djshnibz Жыл бұрын

That rear brake caliper was hanging on for dear life and finally let go, RIP

@noduh736 Жыл бұрын

Loctite those intake screws they will endup in the engine

@dcallan812 Жыл бұрын

As the old saying goes 4 wheels are better than 2. Nt here this is a death trap. BUT GREAT FUN 2x👍

@jamesbigham9036 Жыл бұрын

The golf cart is a mean machine and a lot of fun. I think you should make higher ramps that would be a lot of fun. I would love to go for a ride in the golf cart.

@orionsmith7668 Жыл бұрын

Send it!!!

@danielschabilion9435 Жыл бұрын

Wait a sec. What’s with the ground at the slo-mo at 8:08?

@jasonpetrich4141 Жыл бұрын

Need to widen the rear end or do wheel spacers and a shorter steering stem,maybe handle bars instead of a wheel

@jmyd83 Жыл бұрын

looks so tippy needs spacers or wider rear axle or dually's 😂

@robertgoulden3637 Жыл бұрын

I think the brake caliper came off while you were rippin around

@terryroths4254 Жыл бұрын

Strengthen the frame and throw some weight on passenger side to counter balance you. Git to ripping it up!.

@RJenkins6586 Жыл бұрын

You gotta get wheel spacers for the back or get different offset wheels.

@trumancherne0180 Жыл бұрын

I spy a 12 valve in the garage lol

@wrenchin-redneck Жыл бұрын

Lol yep, don’t have a vehicle for that motor yet

@bencross1744 Жыл бұрын

You need a shifter!!! Use the handle with the clutch on it…one forward and the rest back!!!

@wrenchin-redneck Жыл бұрын

I ended up welding that clutch handle to the frame lol it’s what I hold onto half the time 😂 I’m throwing some ideas around to make a shifter though

@Boot_185 Жыл бұрын

the rear end is narrower than the front end making it more tippy. The center of gravity is already crazy anyway to widen the rear end?

@wrenchin-redneck Жыл бұрын

I do have some wheel spacers on the way to help a little bit

@wrenchin-redneck Жыл бұрын

I do have some wheel spacers on the way to help a little bit

@petecunnien5368 Жыл бұрын

What an awesome machine!! That thing is going to kill someone for sure lol

@technician122 Жыл бұрын

Rack and pinion steering perhaps?

@JimmyTheSaintDailyVideos Жыл бұрын

Your insurance company would like a word with you. 🤫

@mundanestuff Жыл бұрын

Drop that motor into an MG Midget or something similar. Should fly, and maybe you'll live a little longer with bones intact, LOL this thing is a wee bit dangerous

@wrenchin-redneck Жыл бұрын

I’ve been on the search for a small little car like that to do it with lol no good deals anywhere near me. I have a couple more engines laying around that need a home

@mundanestuff Жыл бұрын

@@wrenchin-redneck what's a good deal? Looking for one with no engine in it already? Just saw one in NY for $2500 that runs. Not close to home though, eh! Kevin from Junkyard diggs dropped one off at Steve's (This week with cars) a while back for free