In this Grade Guide video, we take a closer look at the chemical and mechanical properties of 6061 Aluminum; one of the most commonly used grades of aluminum. www.metalsupermarkets.com/met...
Пікірлер: 25
@Avis_GodsOwnVlogger2 жыл бұрын
I was wondering why it was printed on the MTB frame, thank you for the detailed explanation.
@vgmdesign4 жыл бұрын
Great video! Thanks, keep them coming!
@reactor4 Жыл бұрын
Great video. Keep it up!
@justinwatts62102 жыл бұрын
I got a new mountain bike and it's frame is made from 6061 t6 aluminum can you explain the benefits of that to me
@mithileshgupta95252 жыл бұрын
Hi.... Sir... Can be used this material for high pressure die casting
@r.guerreiro1406 ай бұрын
Can it be used as cylinders for a combustion engine?
@aravindans5089 Жыл бұрын
Is it used for electric bus bar?
@okdok3742 Жыл бұрын
by psi, u mean cubic inch right? i cant understand how a strength unit can be used for a 2d area like a square inch.
@rifleman7313 Жыл бұрын
I was just curious about the strength capabilities of a ¼" thick piece of 6061 aluminum angle for use as a shelf/table or if I would or should increase the thickness of the material? Just like I'm sure everyone else I absolutely despise when things bend/break. Thanks
@nevinkuser98928 ай бұрын
That's very strong.
@shriharijoshi72253 жыл бұрын
Plz make video on 6063
@AlphaSierraJuliet3 жыл бұрын
Can 6061 be mirror polished and electroplated?
@Navi00762 жыл бұрын
Yes
@mugunthanr99253 жыл бұрын
me working in aerospace company here we are using mostly 6061 T6 aluminum grade i need information about temper 1 to temper 6
@justinwatts62102 жыл бұрын
Man I got a mountain bike and it's made from the same stuff
@blackburn11112 жыл бұрын
"-T : Heat treated to produce stable tempers -T1 : Cooled from hot working and naturally aged (at room temperature) -T2 : Cooled from hot working, cold-worked, and naturally aged- T3 : Solution heat treated and cold worked- T4 : Solution heat treated and naturally aged- T5 : Cooled from hot working and artificially aged (at elevated temperature)- T51 : Stress relieved by stretching- T510 : No further straightening after stretching- T511 : Minor straightening after stretching- T52 : Stress relieved by thermal treatment- T6 : Solution heat treated and artificially aged -T7 : Solution heat treated and stabilized- T8 : Solution heat treated, cold worked, and artificially aged- T9 : Solution heat treated, artificially aged, and cold worked- T10 : Cooled from hot working, cold-worked, and artificially aged"
@robertpriest10363 жыл бұрын
Can somebody please help help me 🙏. Which is stronger an A Frame from Square or Rectangle Tubes or An a Circulating tube in an A frame ,PLEASE point out the the obvious answer, Thx's Rob ✌😳🤪👍🤔🤔🤔🤔🤯😇😏
@bobgoldman44043 жыл бұрын
I dont have an answer but also wanna know now
@AlphaSierraJuliet3 жыл бұрын
Depends on what you're using it for, thickness of the tube and the load / stresses its going to be under
@hallo-xp2wh3 жыл бұрын
square is better than rectangle and circular tubing but.... To make it simple , mass should be away from center line (neutral axis ) ex : I section more mass away from center ,the better it becomes for flexular stresses case
@rajeealidao52963 жыл бұрын
Depends on where to use
@robertpriest10363 жыл бұрын
CAN someone Please reply 🙏. Which's Stronger an A Frame , or , a Circle Tubed A Frame 🤔🤔👍😳✌🙏🙏🙏🙏🙏🙏. Thx's I can't wait 4 Someone 2 say the Obvious. 🤪😵🤯🤢🤮.