No video

68-74 C3 Corvette (Gas tank) (Sending Unit) and (Filler neck) Removal Installation.

  Рет қаралды 19,552

Problem Solver Garage

Problem Solver Garage

2 жыл бұрын

Step-by-step Corvette C3 Gas tank and sending unit Removal and Installation. Corvette C3 filler neck Installation.
Corvette C3 leaky gas tank Repair, Corvette C3 gas tank repair, C3 Corvette sending unit removal and installation.
Step-by-step 1968 to 1974 Corvette gas tank and sending unit Removal repair leak and installation.
Here’s a link to the whole entire Corvette Series every episode in a row 👉 • Corvette C3 restoratio... ✅
Links for parts for gas tank, all parts 👉shrsl.com/37e7f ✅
Thanks for watching episode # 29 of Corvette C3 restoration.
#CorvetteC3
#CorvetteC3RestorationSeries

Пікірлер: 61
@austinhanzlik1027
@austinhanzlik1027 2 жыл бұрын
If anyone is tuning in for the first time, you would be privileged to own a vehicle that this man has worked on. Amazing, thorough mechanic. I’ve been working in cars all my life and I learn something new every time we are lucky enough for him to upload a video. Cheers
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Thanks
@XXxxMULLINSxxXX
@XXxxMULLINSxxXX Жыл бұрын
I agree… the courage to go right at it and not look back is amazing. I love it when he tells us DONT BE AFRAID! I’ll walk you thru it, now worries! I can’t stop watching his videos! Lol
@lanceballard455
@lanceballard455 3 ай бұрын
I have a 77 vette. Sitting for 22 yrs. Need to clean old gas from tank and lines. Hoping my tank is solid. Enjoyed your video
@vanishingpoint5248
@vanishingpoint5248 Жыл бұрын
I take a swig of beer every time you say “OK Guys”….I am drunk halfway through the video! 😂😂 Seriously very grateful for this video series as I’m working my way through a 68, I like your simple explanations as well as ‘fix it if possible” attitude, lotta C3 how to videos out there but this series is the best!
@sqr2024
@sqr2024 2 жыл бұрын
Great timely video as I need too it on my 71. However always use new gaskets to avoid assembling with glue or silicone. You have gone to the trouble with removing the tank so repair it properly.
@Nobamaable
@Nobamaable Жыл бұрын
I was thinking the same thing...don't bubba the job ; )
@alexandromagno5374
@alexandromagno5374 7 ай бұрын
Amazing job. I appreciate your knowledge and good to let us know how to do. Good video 👍
@ProblemSolverGarage
@ProblemSolverGarage 7 ай бұрын
Thank you
@user-fp1qp2hw6o
@user-fp1qp2hw6o 11 ай бұрын
Love watching the videos very helpfull I'm a first time owner of a 73 corvette
@markf4328
@markf4328 Жыл бұрын
Thanks for this and all your videos. My C2 sender is leaking but is very similar to the C3. Great instructional video for if you are on a budget or doing a full restoration.
@XXxxMULLINSxxXX
@XXxxMULLINSxxXX Жыл бұрын
Anything I buy from rock auto, I’ll be putting his name in the referral… even if he hasn’t done a video on the parts I’m buying. He deserves it.
@paulattanasio3061
@paulattanasio3061 2 жыл бұрын
Just started watching your video's Freakin" awsome! I am restoring my 69 that was damaged in Hurricane Sandy here in NY. Rest assured I will be watching from the first one on. Please keep them going! If I run into anything you haven't covered, I will try to reach out to you. Thanks again!
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Glad it’s helping people out, thanks for watching
@mickaelblais8700
@mickaelblais8700 2 жыл бұрын
Great details video. Any videos about C3 break replacement,calipers,rotors etc? I need new break on my 1973 convertible.
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Emergency brake video coming out soon, my brakes are fine so I’m not doing anything with them but the emergency brake stuff none of it worked
@mariano4003
@mariano4003 2 жыл бұрын
great job!
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Thx
@kregscott6750
@kregscott6750 2 жыл бұрын
Great video. It will surely make things alot easier installing my tanks sending unit. Thanks good stuff! Kreg Scott
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Thanks for the awesome feedback
@rolandwallick844
@rolandwallick844 2 жыл бұрын
love your tire stands great idea, i just took 4 of those to the scrap yard uggg
@firstnationsindian8062
@firstnationsindian8062 Жыл бұрын
Time for a new tank and seals.
@budehrmann5902
@budehrmann5902 2 жыл бұрын
Just watched this video. Great choice replacing the sending unit. I just replaced my original one on my 69 when I installed MSD Fuel Injection. When removing the fuel hose from the unit, I cracked the factory soft solder seal where the pickup tube goes thru the sealing disc. They crimped the tube in place and then lead soldered the joint to seal it. With fuel in the crack there is no way you can resolder it and you would burn the two electrical connection seals too. I know this is all factory because I am the only owner of the car. Be careful removing or installing the hose onto the steel tubing because the replacement ones are made the same way. Should have been furnace brazed, but that costs $.
@mzaccagnini7179
@mzaccagnini7179 2 жыл бұрын
JB WELD IS THE BEST STUFF.
@CrazyPetez
@CrazyPetez Жыл бұрын
I wouldn’t put THAT gas tank back in my Corvette. It’s been leaking for years. Exact replacement tanks are readily available and not break-the-bank expensive. Replace the in-tank filter too.
@Nobamaable
@Nobamaable Жыл бұрын
yep
@bmwspeedman
@bmwspeedman 2 жыл бұрын
Great video. I would however shorten that main fuel line a bit as it is going to rub on the frame and cut through.
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Thanks I will double check that
@MPSuwanee
@MPSuwanee 2 жыл бұрын
wow that was a lot of work.
@XXxxMULLINSxxXX
@XXxxMULLINSxxXX Жыл бұрын
You can take the time and do it the right way or you will have to MAKE time to do it the 2nd time if it isn’t right. 😂
@mzaccagnini7179
@mzaccagnini7179 2 жыл бұрын
JB weld also makes a product called JB quick weld if you don't want to wait 4to6 hours.
@Tom-kn7gb
@Tom-kn7gb 2 жыл бұрын
man you could play a drining game for as many times he says okay or okay guys
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Lol
@kevenc
@kevenc 6 ай бұрын
If you're concerned about it blowing up, fill with water before you do things
@Nitrodan73
@Nitrodan73 2 жыл бұрын
Don't use a power drill because it will spark! As he's sticking a camera in the hole of the tank. Lol! Great video though!
@crawford323
@crawford323 9 ай бұрын
When an original fuel tank is removed, where was the build sheet attached or commonly called the "Tank Sticker." I would like to snake a fiber optic bore light camera to investigate if one exist on my. '73.
@specialks1953
@specialks1953 2 жыл бұрын
Water on a gasoline fueled fire is not going to turn out well in most cases. Jus' Sayin'
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
I think you’re thinking “grease fire”
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Pour some gasoline onto a fire pit, light it with a match and spray it with a garden hose see what happens, fire gets put out
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Spray water on a grease fire and your whole house goes up in flames
@chadalancarroll
@chadalancarroll 10 ай бұрын
Gasoline fire is a Class B fire. Water spreads it out. en.wikipedia.org/wiki/Class_B_fire @@ProblemSolverGarage (but hey the rest of the video was great and very helpful. Seems like you have an awesome channel. I'll be checking out your other C3 content.
@Nobamaable
@Nobamaable Жыл бұрын
Great video... where did you get the spanner tool to tighten the tank sender unit? Thx.
@ProblemSolverGarage
@ProblemSolverGarage Жыл бұрын
Ecklers corvette
@barryuttley1164
@barryuttley1164 2 жыл бұрын
great video no tank sticker?
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Thanks. Don’t know what a tank sticker is
@briansweet4977
@briansweet4977 2 жыл бұрын
@@ProblemSolverGarage Thanks for the great video. Tank Sticker is in reference to the manufacturer leaving a spec sheet with the car. In this case they left a piece of paper on top or around the gas tank on C3's. Somewhat valuable if found with the car. Looks like your tank was pulled previously so that guy has it.
@johnmangrum8910
@johnmangrum8910 Жыл бұрын
Why didn't you just replace the gas tank?
@ProblemSolverGarage
@ProblemSolverGarage Жыл бұрын
I do everything on a small budget
@johnmangrum8910
@johnmangrum8910 Жыл бұрын
@@ProblemSolverGarage I understand. You do a great job explaining things and I have watched endless episodes of you. I wouldn't have had the knowledge or patience to tackle that tank. thanks for sharing your knowledge. I've learned alot from you.
@arthurgrice401
@arthurgrice401 2 ай бұрын
Overuse of the word “guys” - 😅
@ProblemSolverGarage
@ProblemSolverGarage 2 ай бұрын
Thx guy
@Mr_D555
@Mr_D555 Жыл бұрын
Lot of unnecessary work, all you really needed to do was replace the tank sending unit and O-Ring.
@pinkeye983
@pinkeye983 5 ай бұрын
Preventative maintenance.
@Schlipperschlopper
@Schlipperschlopper 2 жыл бұрын
Sadly from 2030 on all combustion cars including classics will be banned from public streets in entire EU and Scandinavia :-( In Germany the Green Peoples Party gave order to shorten fuel supply from 2025 on by reducing all conventional fuel stations to only one state operated central gas station per city or county. Now they even want to slow down all the gas pumps from 20 litre per minute to 2 litre per minute...From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a new kind of crime here, called emissions and smoke crime. Called Bundesabgasbespaßungsverordnung in German.... :-(
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
I’ll just have to make videos on how to convert classic cars to electric
@Schlipperschlopper
@Schlipperschlopper 2 жыл бұрын
@@ProblemSolverGarage Next year Edelbrock will bring out an electric Crate engine for 1970s Chevy frames
@ProblemSolverGarage
@ProblemSolverGarage 2 жыл бұрын
Nice
@dkevvv
@dkevvv 2 жыл бұрын
Don't freak out so soon,,, it will not happen so soon.
@Nobamaable
@Nobamaable Жыл бұрын
Electric cars suck! Screw the green party... left wing wacko's!
@WhalersWorld
@WhalersWorld Жыл бұрын
Why would I have 2 fuel lines coming off tank to pump . 1976 vette
@ProblemSolverGarage
@ProblemSolverGarage Жыл бұрын
One is the return line
1968-1982 Corvette C3 Gas Filler Neck Gasket Replacement
13:40
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 24 МЛН
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 14 МЛН
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
Бискас
Рет қаралды 3,7 МЛН
Summer shower by Secret Vlog
00:17
Secret Vlog
Рет қаралды 13 МЛН
Here's Why You NEVER MESS WITH Your Factory Fuel Pump!!
14:11
C3 Gas Tank Installation Tips
7:46
The Driveway
Рет қаралды 4,8 М.
C3 Corvette Original Clock Fix - #1
11:55
Restoration Obsession
Рет қаралды 23 М.
Troubleshooting and replacing a fuel sending unit in a GM A-Body.
23:31
Jack of All Trades
Рет қаралды 14 М.
Removing gas tank
19:39
Fun with cars - mostly Corvettes
Рет қаралды 10 М.
Mom's K5 Blazer and C3 Corvette - LOTS Of Work To Do!
1:01:18
Pole Barn Garage
Рет қаралды 187 М.
C3 80 to 82 Gas Gauge Sender Replacement
8:00
kd5fx
Рет қаралды 11 М.
Replacing the Fuel Tank in a 1967 Corvette Convertible
20:02
Bryan's Projects
Рет қаралды 10 М.
C3 Corvette fuel gauge stopped working
11:15
C3S Garage
Рет қаралды 7 М.
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 24 МЛН