69 F100 390/5 Speed Driving The Side Roads Great Sounds!

Рет қаралды 9,226

Жыл бұрын

Going through the gears and hitting the side roads for the first drive of the year. In case you haven't seen any of my other videos, this is a 69 Ford F100 with a mildly upgraded 390, 5 Speed, and a 3:70 rear gear. Truck runs very well and sounds even better. Well, at least to me it has a great sound, Comp 270 cam, Edelbrock RPM, 750 Holley, with the Sanderson headers, Flowmaster mufflers and side exit exhaust....

Пікірлер: 50

@richliveshots Жыл бұрын

Looks and sounds awesome! I have a 1970 and I just got back on the road. 390 / T5

@scottboettcher Жыл бұрын

Sounds similar to my '68 with a bored/stroked 427. Can't mistake that startup sound...nor passing!

@MikeWolf-427 Жыл бұрын

Great Looking truck. Sounds great!

@f100inc3 Жыл бұрын

Thanks!

@JamesSmith-iy5nm 8 ай бұрын

nice truck.

@bobbyboothe8964 Жыл бұрын

Looking good and sounding good.

@f100inc3 Жыл бұрын

Thank you, I appreciate it. Thanks for checking it out...

@wildcycles1 2 ай бұрын

Sounds great! Reminds me of my black '70 Shortbox I had. Nice truck!

@f100inc3 2 ай бұрын

Thanks, I do like this sound very much as well…

@user-kx4il5bi4s 11 ай бұрын

Right down the road from me in Cartersville. Had to have seen each other at shows. I got Black 69 too.

@f100inc3 11 ай бұрын

Wow, small world! I don't show much, been to Ridz by River with it once, didn't stay long. . .

@jesseclem7997 Жыл бұрын

Sounds just like my old truck..granny 1st second third and reverse on the floor 390 four barrel carb and the way video is set uo makes me feel like im driving it again with its steering and body leaning

@f100inc3 Жыл бұрын

Yes, lots of body roll compared to today, a fun drive...

@evanbaldwin2703 Жыл бұрын

I need to do this 5 speed swap in my 67. Sounds and looks great man!

@f100inc3 Жыл бұрын

Thank you. After years of three-on-the-tree, I couldn't take it any longer! No regrets...

@evanbaldwin2703 Жыл бұрын

@f100inc3 good to hear. Need to start doing my research. Saw your one video where you did the swap. Didn't look too bad. Time to track down a T-5!

@f100inc3 Жыл бұрын

@@evanbaldwin2703 If you are local to Metro Atlanta, I have one. Good luck on your swap!

@Coronet_shop Жыл бұрын

@@f100inc3 hmmm how much for the trans I’m in the area as well

@mearrastra2969 Жыл бұрын

@@f100inc3how much you want for the t5 I'm in Atlanta

@wemersonflav9815 Жыл бұрын

Nice!😀

@f100inc3 Жыл бұрын

Thanks!

@LuisChavezRN 29 күн бұрын

Is your truck lowered? If so, what set up you running?

@terrythomas7768 11 ай бұрын

I have 1 I miss it my badass very fast

@richliveshots Жыл бұрын

Did you go with the old Z bar or did you go hydraulic? I tried to stay true to the old school and wait with the Z bar. But in doing so I have an issue with my throw out for catching on my header flange. Had to put a spring on it and it doesn’t feel confident when I’m going through the years.

@f100inc3 Жыл бұрын

I am using the factory pedal/linkage/bellhousing. I am using Sanderson headers and don't have any clearance issues with the clutch linkage. 👍👍

@stevenderks8688 9 ай бұрын

When can I come pick it up, that's one of my dream trucks. I had a 69 250 2 wheel drive, cops took it, it was all original paint on it it was mint, I felt like I was in a parade every time I drove it. People would wave, and give thumbs up were ever I went, I'm from MN. So not to many of them around, had a 72 also , it blew up so I had it at my bosses company and didn't get back to it for a while and he junked it, it was rust free also, so now I'm with out a bump side.

@f100inc3 9 ай бұрын

I know the feeling, people love to see these trucks and everyone has a story to tell. I can imagine they are hard to find up there! Sorry for your losses. . .

@thenaturalbob4974 Жыл бұрын

Great truck I got a 68 ranger 390 5 speed. What’s your thoughts on the comp 270 cam? I am running a Howard’s gt cam in mine and was just wondering.

@f100inc3 Жыл бұрын

I have to say the 270 has worked out quite well. The mid range torque is excellent… thanks

@thenaturalbob4974 Жыл бұрын

Thank you I have been pleased with Howard’s cam. It also has great midrange torque.

@jesseclem7997 Жыл бұрын

Where you located this truck is nice I sold a 69 years ago and always wanted one that was a 5 speed

@f100inc3 Жыл бұрын

I am in Georgia...

@AllisterBurris 6 күн бұрын

How has the t-5 held up for you? I have the transmission to do the swap its a world class t-5 but im reading some people say d9nt put them behind a 390 because of the torque

@f100inc3 5 күн бұрын

I would say it has worked out of me because I don't thrash my truck, I am not doing burnouts etc. I think the torque info you got is correct, but if you are just driving it like me, it is fine. I get on it pretty well but i just don't thrash it. Thanks.

@AllisterBurris 5 күн бұрын

@f100inc3 thanks I really like your build. I don't beat on stuff either, but I will let the secondaries breathe on occasion. Maybe a burnout or two a year. I think I'm going to go for the swap. Worst case scenario I look for a t5z while I drive it.

@f100inc3 4 күн бұрын

@@AllisterBurris I had the T5 already so I thought if I blow it, I will upgrade to a Tremec. Sadly, I rarely get the chance to get it out so I am guessing the T5 will be around a while. . .

@stevek5988 4 ай бұрын

Whats the 5 speed out of. Any adapter problems

@f100inc3 4 ай бұрын

It is a World Class from a Mustang. The Wilcap adaptor works well, no issues and uses stock clutch, bellhousing, and linkage.

@aslmx1918 6 ай бұрын

What lifters and rocker arms are you running?

@f100inc3 6 ай бұрын

Comp lifters, stock non-adj rockers...

@aslmx1918 6 ай бұрын

@@f100inc3 I’m buying a truck with 390. It has roller rockers and they are ticking. Guy says they are showing correct on feeler gauge. Just wondering if I need to put stock ones on it?

@f100inc3 6 ай бұрын

@@aslmx1918 Are they adjustable? I can only imagine they are in need of a valve adjustment.

@aslmx1918 6 ай бұрын

@@f100inc3 they are and I will try. I hope that’s all it is.

@aslmx1918 6 ай бұрын

@@f100inc3 forgot to ask. Do you have stock push rods?

@terrythomas7768 11 ай бұрын

My 1969