Watching Bill work on a 7.3 again is a dream come true for me. Wish he would do a whole series of 7.3 backyard barn find videos. 7.3 fans would love it.
@onehappyfarmer3461 Жыл бұрын
No kidding, I have a 7.3 and his informative videos are great to watch.
@alhanes5803 Жыл бұрын
@@onehappyfarmer3461 I wouldn't let this guy work on a lawn mower. There is a check ball in the block that keeps oil from draining back out of the reservoir. The low pressure pump could be completely worn out and would fill the reservoir in 3 seconds when cold. I can't believe people believe this guys bs. This is as bad as telling you to change the reservoir oil with oil change. There is about 1 pint of oil in there, and 2 qts left in each head. Why not pull the heads and drain them every oil change. What a fool. All these people on here have made themselves believe they start and run better and quieter after doing that. Another one is the crank case vent. He says it will cause the turbo to leak. Uh huh, ok.
@xxxmikeyjock8 ай бұрын
@@alhanes5803 check ball is the shortcut circuit, but I agree there is no way the lp pump is the cause of no oil in the rez
@biodveghead95358 ай бұрын
Just did this repair/swap and worked out exactly how Bill said. Perfect. Really sad to hear of his passing. He was absolutely in my thoughts during the entire time I changed out the LPOP the other day. He is going to be missed on so many levels...
@DanielJaegerFilms2 жыл бұрын
Peg from Zip Ties would be mighty proud of you for that cold start redline at 21:00 👌🤣
@willhenderson8118 Жыл бұрын
I'm glad others here watch that legend
@billythekid0692 жыл бұрын
This man is doing God's work. Diesel Tech Ron is smiling down knowing you're still helping keep these old trucks alive.
@dalethornton1113 Жыл бұрын
Diesel Tech Ron is my hero, tragedy struck when he left too soon.
@jace1414 Жыл бұрын
#keeptheolddawgsrollin
@josephgullotto3540 Жыл бұрын
THANK YOU RON
@Mikesroadtrip-ec5kp2 жыл бұрын
Keep up the 7.3 videos! We love them. Not everyone can afford the new trucks. I have a 2002 Super Duty.
@johnbrizendine77162 жыл бұрын
My '96 f250 super duty almost has half a million miles on it! I just wish diesel was a bit cheaper so I could afford to get to a million miles sooner! One trick I learned a while ago is that these engines do not like the ultra low sulfur diesel fuel as it has a lot less lubricity than old school diesel fuel, so add a bit of 2-stroke oil to the diesel when you fuel it up, makes the engine run a lot smoother and keeps the fuel system lubed.
@user-eg8hb8xt3j11 ай бұрын
I’ve got a 2001 with a manual trans . I’ll never sell that thing . I’ve test drove new trucks and I can’t justify another mortgage payment 😂😂.
@dgrenier490810 ай бұрын
Same here, several 7.3’s on our farm. 00 - 03’s with most having about 190k on them, they’ll still be running when I take my 6.4L to the scrapper and might just out live the 6.7s too. Biggest issue now is getting parts, anything body related is getting harder to find and you can practically forget finding a take-off bed that’s any good. Ours are all (but 1) flat beds now.
@JRotten8 ай бұрын
@@johnbrizendine7716 I dump a qt of dextron 2 tranny fluid in every fill up. Poor man's injection clean and lube.
@EM-fi2qg2 жыл бұрын
There is a trick to get the fan on. Tape a string to the fan nut and wind the string around it. (Think of it as a pull string to lawn mower). When you get the fan nut just started, slowly pull the string and it will wind right on. This is an old BMW e30 trick. Works like a charm.
@ArthurFuckingHogan2 жыл бұрын
You're an invalueable resource, Bill! The harbor freight pullers work a lot better & last longer if you grease the threads reel good- keeps the cheezy metal from melting
@mrjprice32 жыл бұрын
Bill, you are always so helpful, and I love your stories to break up the KZfaq PowerStroke classes. It looked like the truck had over 300k on it already, so it’s just getting broke in 😀
@faith4freedom762 жыл бұрын
After spending 10 grand at a technical school, you'll be lucky if anything remotely close to what this man just taught....is shared in a classroom. Thank you PSH!! 🇺🇸 🇺🇲
@christopherparis68412 жыл бұрын
Tech school grads are no more than dealer employees called parts changers lmfao....ask a Chevy guy to fix a BMW or a Ford tech to fix anything the first time lmao
@failranch95422 жыл бұрын
@@christopherparis6841 and then ask them to repair anything that doesn’t require proprietary diagnostic tools. But that’s just on average. There are some exceptional young folks out there who can fix anything but they’re a challenge to find.
@paulgibson359 Жыл бұрын
I have watched a lot of these powerstrokehelp videos, and this simple well down video just helped my son and I get a 99 7.3 powerstroke running. This truck was my brother's truck and last fall as it got cooler the truck wouldn't start. He bought a 2021 Ford and sold me his older 7.3 to me. My son and I replaced the low pressure oil pump in about 2hrs, and it starts and runs great now. Going to do some of the fuel mod grades Bill has shown in some other videos. Good teacher, and appreciate his veterans support
@scott13952 жыл бұрын
Love my 97 7.3, she has 428,000 miles and no glo plugs, injectors or Hipop! She still cranks well in cold, I just Waite about 15 to 20 seconds after lite goes out, she fires right up! I know I'll have to do something sooner or later but for now she's OK! Plan on driving her for another 22 years if possible!
@stevehauskins79787 ай бұрын
This is absolutely right, and to help you illustrate and diagnose this, one of the criteria that need to be met for the oil pressure gauge to move to the normal position(It doesn't represent the actual oil pressure) is that the sensor at the top of the HPOP reservoir he pointed out has to receive pressurized oil. That means the reservoir has to be filled to the top, and if your low pressure pump is worn and allowing excessive drainback, it can take an extremely long time to fill. Combine this with the fact that the injectors will not fire until the reservoir is filled and the high pressure oil system has been sufficiently pressurized (I believe 4-500 PSI is required) can make it near impossible to start without correcting these conditions. Also, this means the engine must crank fast enough that the high pressure oil pump produces sufficient pressure, as it's driven directly from the geartrain. In either case the computer will not throw a diagnostic code because the sensors themselves are accurately measuring what they are designed to. Cat and international HEUI injected engines are a different sort of beast to understand, but once you do, they can be quite potent and reliable early high pressure injection diesel engines
@ussindyboyz96838 ай бұрын
Praise the Lord for Bill and all his help over these years. RIP, my friend.
@DanielJaegerFilms2 жыл бұрын
Wow, I’m surprised how easy that pump was to change. I figured you’d have to remove the front cover and oil pan.
@caterpillar6nz3102 жыл бұрын
yep very good desing.....7.3 is a wonderful engine my 2 cents
@GIGABACHI2 жыл бұрын
I was expecting as much labor involved as dismantling a Moose or Bear.
@dangitgrossman2 жыл бұрын
Thank you again for helping us out with our bad ass 7.3’s !! You make me want to keep mine forever when I watch your videos, when sometimes I get down on myself because my girl’s suspension is so damn rough and I see folks out there with new trucks
@wcpportfolio2 жыл бұрын
Just remember for the cost of one monthly payment of those brand new shiny trucks with all their useless cameras and whatever you could dang near overhaul the entire suspension on your 7.3. I love my 7.3 515k still going strong
@7.3powerstroke6 Жыл бұрын
@@wcpportfolio If you have a 7.3 DON'T EVERY TEST DRIVE A NEW TRUCK, AND REFUSE YOUR BUDDYS LETTING YOU, I still have my 7.3 but I now drive a 6.7 because it's soo much more refined and powerful and effortless when towing, plus the brakes are so much better.
@wcpportfolio Жыл бұрын
@@7.3powerstroke6 oh I agree they’re lovely .. I drive plenty of brand new fleet trucks at work but I’m not the one paying for them 😄
@davidshane272 Жыл бұрын
Don't do it I did and it's been about 13 years of kicking myself
@donschaefer94422 жыл бұрын
Thanks Bill. Excellent video. No bs. Straight to the point. Love my 7.3s!
@patricktaylor81822 жыл бұрын
Great info Bill, makes me sick that I traded in a very nice 2000 f-350 4x4 in 2005 because my Ford dealer kept replacing fuel injectors at 480.00 each, and could not find the issue, this had to be the cure.
@daveooooo2 жыл бұрын
I'll tell you what I have watched a lot of KZfaq videos about working on vehicles and this guy by far explains everything thoroughly and simple. And his happy-go-lucky attitude really helps the stress level thank you so much sir I guess your name is bill God bless you.
@gdmcneil12 жыл бұрын
thoroughly enjoy any and all series getting put out...just bought a supposedly dead 01 F350 7.3...getting it back to a stock config as much as possible for a baseline diagnostic...your videos are extremely helpful...experienced various gas motor repairs but limited in diesel...love it...thanks
@somewhereinoklahoma55742 жыл бұрын
So nice to see a good Ol’ 7.3 video. Thanks Bill!
@kylepaschke2 жыл бұрын
I've done this job a fair amount of times myself and I still watched this from start to finish to learn from the best. Great video and I really love the little facts on top of the main content
@sbag112 жыл бұрын
Loving these recent 7.3 vids. Thanks, Bill!!!
@NickBwheelin2 жыл бұрын
Great video Bill. Always enjoy the content. Especially when a 7.3 is involved 😉
@breakawaymotorsports2 жыл бұрын
Thanks for this video Bill..I've got two of these 7.3s still working and will keep this in mind if they become stubborn starters.
@Cfass12 жыл бұрын
7.3l video and Bill doing all of the work while video recording. This is right up there with the video you did with a black eye. An instant classic 👍🏼
@markjauregui8138 Жыл бұрын
Love learning about these trucks... This is priceless information... Currently learning about rebuilding the E4OD... Thanks for sharing...
@tyronky2 жыл бұрын
Been having this problem. Just ordered the pump and some arch oil, been watching your videos for a long time. Thanks
@Angrysquirel110 ай бұрын
Thank you for this Sir. I've really enjoyed your videos. I am a steady customer of Archoil products now too!
@twinturbocoyoteftw2 жыл бұрын
Seen this dozens of times. Most dealers throw injectors and icp sensors along with the occasional high pressure pump. Great video Bill from one tech to another!
@turbobobby12 жыл бұрын
good to see this video! my 2002 has 434,000 miles on original oil pump and it takes a longer than usual time to start. thanks for sharing this!! I'll be installing a new pump on my ole faithful superduty. (and still running original oem stock injecters)
@alfredanderson592 жыл бұрын
Thank you for all the infor you you provide in your vidoes on the 7.3, I'm a fairly new owner of an 01 dinosaur, but it's been the best dinosaur I've owned over the years and plan on keeping it until vehicles fly.
@dieselmunkey2 жыл бұрын
That's a right-hand thread on the fan clutch, not reverse...
@SomeTechGuy6662 жыл бұрын
There is a reservoir above the HP oil pump to feed it oil during start up. There is a ball check valve in the passenger head that feeds the reservoir. Normally the LP oil pump does not need to feed the reservoir during start up. I would check that the ball check valve is not leaking, causing the reservoir to drain down. The other potential cause of hard start due to lack of high pressure oil is a leaking poppet valve on one of the injectors. If an injector O Ring wears out, debris can get into the poppet valve and cause it to leak.
@michaelryan15472 жыл бұрын
Hmm contradictory info. He just said the opposite but you’re very specific. Let me ask you. Just bought a 99 7.3 dirt cheap for some body parts for my 02 7.3 story was it got impossible to start in cold weather despite having starter and new HIGH pressure oil pump mechanic told him low compression not worth rebuilding engine on such rough truck. Not sure why high pressure pump was replaced if was just dead or an attempt at solving cold start. Anyway watching this thought maybe there’s life in that $1000 parts truck after all but then your comments dashed my hopes of getting it running w low pressure pump. Any insight appreciated.
@chickenknucklez2604 Жыл бұрын
Ya I mean that makes perfect sense... If that was true then you'd clearly not see any difference with him replacing the low pressure pump so imma call bullshit on your theory he just supplied you with truth and you're still to blind to see 🙈
@automan73s8 ай бұрын
The Check Valve (Ball, Spring) is on the Driver's Side Timing Cover area, 1996+ 1994-1995, Check Valve is on the HPOP. If the problem is bleeding HPOP Reservoir overnight, it's the Check Valve, Not LPOP! If HPOP is not pumping up properly while running, then LPOP is the problem 👍
@jimkillen10652 жыл бұрын
I always recommend your sight when it comes to the Ford Diesels trucks . Even how you test head gaskets , the caster shake , death wobble or what ever folks call it . Your sight helped me fix my friends 6 .0 egr cooler problem. I remember and passed on to my friends how you suggested on the oil change ect . Thanks for all you do . Jim
@starionslider21162 жыл бұрын
I love my old loud 7.3 . Hasn’t let me down ever in 17yrs. They can keep the new fragile diesels.
@brokedickfarms74322 жыл бұрын
The Wealth of knowledge that just pours out this man is extraordinary. Thank you
@VitruviunMan2 жыл бұрын
Tip: in case you don’t have an impact or don’t want to remove the radiator, you can hold the flywheel with two vice grips and the use the puller with hand tools. Also the Melling instructions state to soak the pump in oil but I’m sure the grease is no problem. Thanks for the video Bill!
@markbrandon77562 жыл бұрын
320K Miles and its has began, one thing that helps starting until you have time to change the oil pump is to restart it cold in evening after running it for the day. Then the next day your starter will certainly thank you for not making it work to hard. Starter is also new since 75K. Cold (29-32) morning start can test your batteries. Still gets 14 mpg same as at 70K when bought truck. PowerStrokeHelp as always the Best of the Best !!!
@2020HotShotTruckingLLC2 жыл бұрын
Great video! Love my 7.3's! Right now both of my trucks are running 7.3's from CoPart wrecks. The high mileage one is hard to start cold. I replaced the glow plugs and rebuilt the turbo while the cab was off the truck and also verified the GP relay. I assumed it was low compression or stiction, but I'll have to check the oil in the HPOP reservoir to see if it's draining back thru the pump.
@2020HotShotTruckingLLC Жыл бұрын
Here I am 6 months later watching this video again. The weather has been warm and the truck always starts when it's warm. Now, it's gotten Georgia cold again and my daily driver needs some help. I really need to see if this is the cause and fix it. I already have the Harbor Freight puller and can confirm that it really does work. One note: loosen the fan clutch BEFORE removing the belt or loosening the fan shroud. Makes it easier. As I spin off the fan clutch, I keep one hand on the blade from the front side of the shroud so when it comes loose you just lift the fan and shroud together without damaging the radiator.
@jd70harryharris802 жыл бұрын
Awesome video. I just stumbled across your video and just so happens that my truck is starting to do this exact issue. Thank for sharing.
@claytondaniel78322 жыл бұрын
Thank you Bill. I have learned so much from you. My Six liter runs great because I always do what you say. Thanks
@paulhoskins78522 жыл бұрын
Awesome.
@elaoesteromendoza9669 Жыл бұрын
My man you make the things look easy great job!!
@russostman153810 ай бұрын
Don't forget to change the check ball and seat. And yes there is a check ball. It's in the front of the block behind the timing cover on the left side of the center gally. It's the pressure relief valve for the lpop
@VAHOSS8 ай бұрын
Yep I was going to say the same thing..especially if you have no start when truck is on an incline
@VAHOSS8 ай бұрын
I just found out that Bill passed away on October 10th
@RustyZipper2 жыл бұрын
Shocked to see some ‘ole 7.3 content on here 💯👍
@dmcdow2 жыл бұрын
Thank you for this concise video. I don't even own a 7.3, but really like videos like yours.
@bradleyholewinski56352 жыл бұрын
Thanks for another great vid Bill !
@mikeriley8677 Жыл бұрын
I just bought a 1996 F-250 with a 7.3 yesterday. It is my first diesel truck. It has 180,000 miles and long cranks before it starts. I thought it was just the fuel system because I had no idea about the oil pressure controlling the injectors. Thanks for the info.
@e030396 Жыл бұрын
Very informative! I have been fighting a similar symptom with my 1996 F350 7.3L for a year. Last year in the Midwest on some cold days it would start right off, then let it set for a day and it would take a lot of cranking to get it started. I put new glow plugs in it and had the rely and low oil pressure pump checked checked, but that had no effect on curing the problem. Finally, a few weeks ago it started right off with temps in the teens, but all of the dash warning lights came on. I drove it a few blocks down the street to my auto service station. The starter was still running and they had to disconnect the alternator to shut down the engine. They replaced the rack in the steering column and now this truck starts consistently on the second revolution down into the low teens. I am wondering if the wires in the steering column were intermittently fouling up the relay or timing on the glow plugs. I had noticed that the column shifter (automatic) was getting a bit stiff starting last year and the cruise control would be intermittent. If the dash lights would not have all come on who knows how long it would have taken to find the problem. Last year during cold weather I would take it to the Ford garage and let it set over night. As it would be the truck would start just fine. But a few days later I would end up with these long cranking sessions to get it started at even 30 to 40 degree temps. I hope his information is helpful.
@rockyroad9709 Жыл бұрын
ive owned my 7.3 since new in 2001. To make a LONG story short, truck looks new in and out with 350+000. miles pulling 10k lb trailer toting a mini ex. Anyway I NEVER knew about this pump. Ill be damned. Shazamm. Mine is not hard to start but if it does i know another possible place to look to R&R. THANK YOU for this video. Hell you guys taught me a lot so far this is just another episode of knowledge
@VicsYard2 жыл бұрын
Sweet. Thanks for the share sir. Keep that one on the back burner!
@Kurtwaldheim22 жыл бұрын
Wow thank you so much for this video. I have a 2002 with 30K mile on it and I think I read the odometer on your truck to have 130+K miles on it. Probably will not need this video for a while but now I know how to do the job. Thank you for your time to come out with the video
@johnbrizendine77162 жыл бұрын
I'm pretty sure it had like 313K miles on it. I am almost to 500,000 miles on mine, but diesel has gotten so expensive it's hard to justify just driving it to try to hit half a million miles now.
@paulgerard54132 жыл бұрын
Awesome Bill, great information.
@richardduke97882 жыл бұрын
Thanks for the video 📹, about the 7.3 cranking !
@grangavilansincero2 жыл бұрын
Im impressed!!! You learn something new everyday! If you ever start teaching classroom, and hands on.. besides your videos. I'm enrolling..!!!
@floydwilliams33212 жыл бұрын
As usual great information Bill
@bch55132 жыл бұрын
I understand it calls for the old green coolant but if a late model 7.3 then it can take ELC and you don’t have to monitor which almost everyone doesn’t do properly. Seen cavitation multiple times because coolant wasn’t properly maintained.
@treelineresearch33879 ай бұрын
The old 250 I recently bought has pretty much exactly this cold start symptom, and I was starting to notice that it wasn't really about cold but rather how long it had sat since last run - if it's been started within 8 hours or so it kicks right over. I just checked it and the complete no start transitioned to trying to kick over right when the oil pressure on the cluster goes up after several cranks, it then runs REALLY rough for 10-15 seconds before suddenly smoothing out and running great. This fits in really closely with what I've been observing and gives me another thing to investigate.
@TheJoshbennett992 жыл бұрын
Thank u bill from powerstroke help your one of my favorite KZfaq people
@suzuki2302 жыл бұрын
Pretty cool to see bill out there willing to do some hands on work and tel each us for free at the same time.
@FredFlintstone212 жыл бұрын
Awesome video! Thanks for sharing!
@stinger45832 жыл бұрын
Thanks, Bill. Good stuff.
@jairoorellana2087 Жыл бұрын
Great video bro love the 7.3 content
@ApolloTheDerg2 жыл бұрын
Nice to know, my 400k mile truck 7.3l runs fine but I will be sure to take care of this if it ever starts getting hard to start. She just keeps going.
@frankajello2 жыл бұрын
Also helps to lookup torque specs for the balancer and any accessories for more peace of mind
@cccEngineer2 жыл бұрын
Thank you for the informative video as always. Can you please put in the description what's needed for this job? Thank you.
@25centsapop2 жыл бұрын
I'm sure you have more "pro grade" tools but the testimony of knowing what you're doing over buying exspensive tools is amazing
@Roudter2 жыл бұрын
Nice...How fortunate that truck owner is. Diagnosis is the hardest part of any profession.
@TexasDronePilot2 жыл бұрын
These motors are dam near bulletproof. I have over 470,000 miles on my 2001 Excursion. You take care of it and they will last.
@bearjersadventures98648 ай бұрын
RIP Bill Another reason for this to happen (probably more common than a low pressure oil pump failure) is failed injector O-rings. My truck had these symptoms. Many of the O-rings had failed which required a long crank to build up enough oil pressure to operate the injectors.
@radarnj80432 жыл бұрын
Kinda an ole school video but .... Bill is the school master in any day. I love my two 7.3s. Give me simplicity in this f'nnn complex world! Thank you Bill! God bless you family and all.
@sgtdog38392 жыл бұрын
I am a 2002 F350 XLT 4x4 3rd owner..no rust well maintained (Oregon) , she has over 200.000.00 miles and running great, You and your channel has helped me so much become my own Diesel Mechanic, Thank You sir....Q: thoes coolant bottles..where can i get a good make ..so many bad comments on ordering them and failing...do you have any good used or ?? and what also is a recommended water pump...i want whats right not a fancy color or name. BTW i did replace the cap you recommended in a previous video.
@inrangerimfire20two Жыл бұрын
Great video man! Long live the 7.3
@kipperminlo28282 жыл бұрын
Another great video!
@1stbump2 жыл бұрын
Awesome video, THANKS!
@salmonaco0072 жыл бұрын
I cut my fan shroud in half putting back that fan is so much easier
@FDM335102 жыл бұрын
I did all of Bill's 7.3 Power Mods on my 7.3 6 years ago, and she still PURRS!
@scottwarner21462 жыл бұрын
thanks for sharing your knowledge
@carterlee83442 жыл бұрын
Thank you!!! This has to be my issue sir. The Lord, is good. God bless you.
@rpsmith2 жыл бұрын
Great Video! Thanks!
@alanarmstrong2323 Жыл бұрын
There is an anti drainback checkball in top of block that has oring under cap the checkball keeps hpop reservoir from draining.
@herkybc130 Жыл бұрын
Excellent video.
@dgodrummer81102 жыл бұрын
holy crow my buddy and I have been dealing with this on our 7.3L for years. "change this! NO change that! check glow plugs, gasket harness." If this is the fix holy crow will I jump for joy!
@joshsrcadventures52979 ай бұрын
Thank you so much. You should be an auto tech teacher!!
@dirtyminerapparel2 жыл бұрын
Sometimes I feel like I should buy a bunch of extra parts before this stuff is not available other than some duralast junk. I keep extra sensors and lines in the truck now but I feel like I should stock critical parts for the future.
@thomasambler88352 жыл бұрын
Great video. Original owner of 1996 7.3, 300,000 miler that currently won't start. Going to have to investigate this. Thanks...I never knew.
@blakeberlin5688 Жыл бұрын
Good to see ole bill working on 7.3s again I know he likes the 6.0s a lot and there great but a 7.3 and Bill is just a perfect fit
@ifronnin2 жыл бұрын
I miss my old 7.3. But then MN/ND winters come around and I appreciate my 6.7. Twice the stock power of a 7.3 and starts every time no matter how low the temperature is, as long as it has good batteries and number 1 diesel.
@jamesringler9872 жыл бұрын
4kw highspeed denso starter and good 5w40 diesel oil makes a huge difference in winter
@jameshiebert3092 жыл бұрын
@@jamesringler987 n
@FordTechATC2 жыл бұрын
Great video but there is a check ball in the system which almost never goes bad but possible for crap to get stuck in it to keep it open. It’s in the block on the driver side behind The front engine cover reservoir and SIDE OF pump. The Allen head bolt is accessible from the top. Need to remove some stuff out of the way and drain the reservoir first. A bad high high pressure oil leak can also drain your reservoir like a stuck open IPR.
@jacobkelley5198 ай бұрын
Great information! I have the long crank every time i start it unless i shut it off and then start it back up immediately. Injector orings didnt fix it, lpop didn't fix it. What are the high pressure oil system parts that can cause the resevior to drain? Im goind to do the ipr valve and that check ball this week.
@texasslingleadsomtingwong87512 жыл бұрын
I've got the long cranking cold starts , never thought to look at the oil pressure on dash . Now if my motor wasn't currently locked up from previously starting it . Began to crank over and stopped . Now to pull injectors , yippee.
@crazykkid2000 Жыл бұрын
Not gona lie i love tbis channel
@sedric61532 жыл бұрын
Thank you so much for this video!! I have one of these dinosaurs yet and it's awesome to see you working on one! Mines bout to cross 200k. I did a cylinder contribution test and codes came up for cylinder 3 and 8. Truck runs good and has good power tho. I'm fixin to haul a tractor with it this weekend or sometime soon. Could injector seals cause them codes? Seems like I have just a slight bit more blowby then I use to
@seanbatiz66202 жыл бұрын
Was tryin’ to add a live chat msg but a damned ad popped up & killed it! 🤬 Anywho, I have amongst my many MANY tools I’ve accumulated over the past oh, 40 some years of working on just about anything one can work on, a wide variety of also antique/vintage tools, quite a few of which have in many ways, never been recreated by “modern” (say, tool Co’s of the past 60 years). Of the various “monkey wrenches” I have, one in particular that’s quite heavy, has an all steel handle, about a foot & a half long with its 90° offset jaw-ways being just perfectly thick/wide enough to work PERFECTLY for loosening & tightening up these fan clutch hub nuts, in conjunction with the use of one of them red handled Y-bar water pump pulley bolt holders… i.e., I never ever need to beat the crap out of one of these clutch hub nuts with a dang chisel at all! This said tho, it sure would’ve been nice, had Ford or Navistar designed the dang fan shroud on these 7.3’s, as a “two piece” setup! The monkey wrench type I’m referring to, are the type with FLAT SMOOTH faced jaws, for large square nuts back in the day, NOT serrated for pipe wrench use!
@johnbrooks71442 жыл бұрын
Thank you Bill. One guy told me I was going to have to put a new plate on behind the oil pump. He said scratches in that plate allowed the oil to leak out of the reservoir. Mark of a mechanic: blood at 7:16. I wear leather gloves now when I can. No torque on the harmonic balancer bolt?
@abv25188 ай бұрын
Rip you've shown me a lot Thanks
@ggolight2 жыл бұрын
Is Bill making house calls now? Fantastic video. Like to see the man work.
@peterdestounis4629 Жыл бұрын
Thank you
@Scrapper2028 ай бұрын
I’ve used archoil 9100 on every 7.3’s,one of my trucks have over 700k miles on it still going strong
@maingun072 жыл бұрын
Might be doing this to mine soon, just as soon as I figure out how coolant is getting into the oil pan. If it's the front cover, then I'll be replacing the front pump as well. Thanks, Bill.
@johnbrizendine77162 жыл бұрын
Most likely either head gasket or injector cups.
@justinb.55612 жыл бұрын
Oil cooler gasket
@BuckInchuteranch12 жыл бұрын
Great and very helpful info here. Curious if this is the problem, is there enough oil dropping back to show up as too much oil on the dipstick?
@DJPereira20122 жыл бұрын
I think my truck may have same issues. 2000 7.3 550 with just under 200k. Been playing hell and it still is having issues starting. Was thinking could be lower in engine like this. Though got some work done all around. May run great after I do this.