Using a stop block will help with having an exact and consistent cuts. Good job.

I honestly love watching you dive into something you're passionate about. It's truly inspiring what courage can not only achieve, but how much joy can be found when you step into the unknown.

Nicely done 👍

Loving this new channel direction man! I really enjoy these videos, they encourage me to take a leap with some wood working and give me confidence to try little projects. Keep it up brother I Also love your style with the lighting and editing for the videos! Its unique from a lot of other content. It feels fresh and looks amazing.

Common board is pine. Next time use a sanding sealer first then stain with the color of your choice and then you can use a gel stain on top of that to even out the tone. All the best

They turned out really great. You’re doing a good job

Wipe off all thw excess glue with a wet shop towel. Your stain will look better than if you use a dry towl. They look good amd keep it up..

Nice! Very comprehensive step by step guide to build that hexagon which is awesome!

try using a stop block at miter saw n all ur bords should b exactly the same , nice build

Great Job! After you did the painting I was kinda sad to look at the outcome. But when I saw it installed, it look so stunning!!

When I use pine, I use a pre stain before staining it.

How did you hang the shelves? Were the 1.5" nails sufficient?

I loved this video. I am a novice word worker as well, thanks for documenting your journey!

Love it man! Mr. build it got me hooked and I’ve been making a ton of stuff lately 😂

Awesome job! Keep up the good work!

How do you get them put together so they look like a perfect hexagon? I just put 6 shelves together and they are all a bit wonky😖I took one apart and made sure all the pieces were the exact same length and I still didn’t get it together right. Very frustrating after wasting all this time!

I spent so much $ on those Claymark expensive pine boards and each time the stain would come out like crap! I was going crazy not knowing what I was doing wrong. Definitely buy the cheaper stuff, it's less dense so it allows the stain to penetrate better. Wish I saw this video months ago.

Nice end results! Two things, 1 you should do a video about all the things you can do with a speed square. 2 use a rag (like a painter's rag) for stain it will pretty much kill brush strokes and help even the color

Instead of marking each piece, set up a stop, much easier and quicker

This is a FANTASTIC diy video! Exactly what I needed, thank you so much! 2:36

How tall is the shelf? Not each individual piece but the fully put together shelf

Loved the build and the strength test. Great work Jess!! 1:47

One thing u could do if install a roll of butchers paper on the end of ur workbench and work off that and rip it off the roll when ur done

Good video, but I’m confused. pine way easier to stain if you do it right. Plus how did you affix it to your wall? Happy videoing!

Great video brother, I suggest using stop blocks to get every board the exact same size :)

I'm not into making wood. After watching the video man I'm hook now. Peace and love and real nice job family...

With pine I typically go with boiled linseed oil and paste wax

good stuff man, keep it up

Hey bud when your gluing up get a wet rag and whipe off the glue dont have to worry about sanding it then makes it super easy when staining :)

common board is normally pine or spruce

How many degrees should we cut the board

I'm in the same boat brother 🤙

I thought common board is pine?? Beautiful shelves!

I think the only difference between "common board" and "pine" is that the lumber you are calling "common board" is probably yellow pine, while the "pine" board is white pine. Pine is OK, but if you want really nice looking projects, you really need to venture into some hardwoods like oak or walnut. I know the nice hardwoods are a lot pricier, but once you've got enough experience to be comfortable and confident with making accurate measurement and cuts so you know you're less likely to ruin an expensive board, you'll be ready to try some more expensive woods.

what song is the BGM?

If you don’t want it being blotchy you should use wood conditioner before hand. Pine would’ve worked well if it was conditioned beforehand

Well I don’t have that fancy tools so I just need to pay $70 on Etsy to buy one lol