AND ANOTHER GREAT CAMERA RUNCAM, ONE MORE HOME RUN FOR THE FPV COMMUNITY.

Good job on the thumb Runcam. Have you ever considered allowing users to have finer grained control over settings in your cameras, like increasing bit rates for resolutions that are using less than 60mbit for example? Thanks!

Thanks. Btw what is your settings during night?

Heck yeah there is, I have been using it.

I have windows 8 so i have to use 0.3.0 beta gyroflow so can runcam thumb pro seaport this beta version please tell 😊

Hey thank you so much for taking the time to watch it. I'm glad it was helpful

That is Exactly what I wanted to hear, It takes a bit of work to make it great, but it can be done. Happy flying my friend.

Hey thank you so much for the kind words and watching the video. Glad it was helpful.

Yeah it's definitely pretty close to the older GoPros nothing like a 9 10 or 11 but man for the price it's great thanks for watching

​@@AdventureFPVhi im curious whether i should go for gopro hero 6 naked or this runcam thumb pro. What are your thoughts?

Hey thank you so much for watching. Now only if Runcam would send me some free stuff... LOL

I have windows 8 so i have to use 0.3.0 beta gyroflow so can runcam thumb pro seaport this beta version please tell 😊

You're welcome! Its not bad at all for the price.

Hey Flip thanks for watching and the comment. I try and keep the pacing steady in all of my tutorials.

Glad it was helpful!I am truly sorry for the delay in response. I had a case of KZfaq Burnout. Times have changed for me in recent months and I am slowly starting to get back to flying and my channel. Had a family tragedy, an Occupation change, a New car purchase, Daughter starting to drive. Kids' school activities and more. I prioritized family first and getting my mental state in order before I could resume my channel operations. Life is trending in a more positive direction and wanted to follow up where I left off.

I put this on me FlyFish VX35 with good results.

@@cmfpv23 yeah I did end up building a quad and am using the thumb pro on it 😁

Hey thanks, you will like it. It does take aa bitt of work to make it look great but well worth $90

Heck yeah, its not too bad.

Heck yeah man, welcome to the club. I am really liking this small camera so far.

@@AdventureFPV Thanks, Just ordered the Zorro ELRS to begin Sim Training 🙌

Glad it was helpful! I am truly sorry for the delay in response. I had a case of KZfaq Burnout. Times have changed for me in recent months and I am slowly starting to get back to flying and my channel. Had a family tragedy, an Occupation change, a New car purchase, Daughter starting to drive. Kids' school activities and more. I prioritized family first and getting my mental state in order before I could resume my channel operations. Life is trending in a more positive direction and wanted to follow up where I left off.

LOL kind of Mario... Glad it was helpful.

No problem! Works great on the insta360 as well

Hey no problems, thanks for watching.

Hey thanks for watching and commenting. I have never really been a fan of the action 2 for the price. I think the orange can look good if you do it right, not as good as the action but for 1/3 the price who can complain.

I am glad to hear that.

Glad it helped!

Hey no problem, thanks for watching.

You bet! no problems, thanks for watching

Thanks

Man you will love the upgrade if you are happy with the original thumb. Thanks for watching.

I had the same issue with the Chimera 4, I just updated to Betaflight 4.3 and it is almost completely gone. I also have the explorer and really do not fly it much anymore because of the vibration issues I have. I may try and do an upgrade on this quad to 4.3

@@AdventureFPV awesome thanks! Or maybe put the supplied arm connectors on.

@@Jacey2001 they are on, just some little bobbles here and there.

My pleasure, thanks for watching.

Thanks for the tip. You can also use the app to preview... kzfaq.info/get/bejne/ptuVh5l5xrC6gZc.html

I have never tried it and it would not be on my list of cameras to use... But Troncat FPV did a video with it and it looks pretty good. Check this out: kzfaq.info/get/bejne/d8WiZ6Vy2b_Uink.html

This is the 4-in quad that I have a little bit of bobble in the tune. I actually just converted this frame over to a dead cat replaced a motors and got new props seems to have gotten rid of the instability issues I was having

Go for the GoPro if you want solid results straight out of camera and your rig can carry the weight.

Is this a UK "sunny day" lol Just kidding, You may need to bump up your ISO setting or just remove the ND altogether if there is not enough light. I also made this video that shows how to preview this camera on a phone before filming: kzfaq.info/get/bejne/ptuVh5l5xrC6gZc.html hope that helps.

Just uses these tips and apply them to that camera.

I don't know of any lenses that would increase the amount of light. You can definitely get an ND filter to reduce the amount of light which is what I use.

Get thanks so much, I would make one if I had one. Not going to buy that camera, but if Akaso wants to send me one I would be happy to do so. Caddx Walnut video will be my next one.

Yes, exactly there is not preview because the camera does not have wifi or bluetooth. That is the one BIG downside to this camera. But you do get what you pay for.

@@AdventureFPV I never knew that. Still amazing for what it is.

@@AdventureFPV you can hook it up via usb to your phone/laptop and press record once and it'll pop up as a webcam with your current settings.

@@Martoriass Okay this is HUGE news, thank you so much I am going to give this a try now. You rock.

@@AdventureFPV awesome :)

Both good cameras, I am into the walnut right now.

@@AdventureFPV Yeah, Ordered the Walnut. Now has to learn how to fly without it first haha

Hmm IDK but I would love to try it...

@@AdventureFPV I hope to see a video from you about it in the future, as I have one on the way.

Hey thanks for watching. Yes I will update the CLI on my site this weekend.

@@AdventureFPV Thanks man & greatly appreciated, just waiting for a new base plate for mine after `tuning it` , easier to ask sometimes !!

@@yorkshiredronetours2995 I just added my 4.3 betaflight CLI to my website under resourses / Files www.AdventureFPV.com

@@AdventureFPV Cheers , will check them out soon ! nice site you got set up, and very similar, im using the DJI radio and Crystal Antenna with V1 goggles, works a treat !

@@yorkshiredronetours2995 Working good for me as well. Thanks for watching.

It sounds like the SD card is not fast enough. How do you power the thumb?

Hey thanks for watching. My videos fall apart one I upload as well. They always look better on the computer before I upload. I just use the standard (KZfaq / Facebook) export in finalcut for or the standard 4K export

@@AdventureFPV using those preset will make it low bit rate and bad for youtube. But yours are way better than mine..

@@TERBANGFPV I would normally agree with you, I also have a super HIGH bitrate custom export I created with compressor and it takes FOREVER to upload and process so I stopped doing that. I had stingerswarm on the show and we discussed this very topic. We found that the KZfaq export is optimized for the conversion process that takes place on the YT side and makes for a pretty decent upload. That is what I did for this video.

Maybe the 6, I would NOT use it for RE but thats just me

Hey thank you so much for watching. I am pretty sure davinci resolve is free for windows as well as mac. This software is powerful.

I am truly sorry for the delay in response. I had a case of KZfaq Burnout. Times have changed for me in recent months and I am slowly starting to get back to flying and my channel. Had a family tragedy, an Occupation change, a New car purchase, Daughter starting to drive. Kids' school activities and more. I prioritized family first and getting my mental state in order before I could resume my channel operations. Life is trending in a more positive direction and wanted to follow up where I left off.

There could be a couple of different reasons for this of course starting with a tune and soft mount would be the place to start. Or it could be that your gyro data just isn't synced up perfectly so I bump that happened a few milliseconds before is now being stabilized a few milliseconds later causing it to have double bumps.

@@AdventureFPV My original video has no vibration, But when you apply thegyroflow, it shakes.

The GoPro hero six has more flexibility like a built-in screen and a replaceable battery. If you can get one for the same price and weight is not an issue, that would probably be a better solution.

@@AdventureFPV thank you for answering,but i meant are from the video quality,is it thumb pro have as good video and detail as like a gopro hero 6?

@@servicehpjogjabantul Hero 6 will have a better out of the box image for sure, If you are good at video production and editing the thumb can look really close

@@AdventureFPV ok thank you my brother,still confusing what should i get for my first camera fpv

@@servicehpjogjabantul I started with a hero 6

You can turn down the smoothness and adjust the timing of the reaction. Just add a touch of smoothness thats all you need for freestyle.

You can also reduce the amount of lens correction.

@@sligit True...

For me yes it is. You can see raw at 1:34

I am using the one that came with it, what quad is it on? Are you using ND Filters? Manual or auto settings?

@@AdventureFPV 5" quad , manual settings except shutter on Auto , 4k/30 , iso 200 with nd16

@@mode2fpv Okay try locking in the shutter and leaving the ISO in auto if you must leave something in auto. The shutter is what causes Jello. Well that and vibrations. But the reason you want the ND in the first place is to lock the shutter. Give that a try and see if it is any better. If now soft mount may be neccassary. What firware is on your quad?

​@@AdventureFPV I would say that the vibrations causes shutter problems that causes jello 😅

@@YOYO-vl6xr That is correct!

Hey thanks Jim, That was a part of the Color curves 10:35 this could have been boosted but I decided to go wiith a contrast look as that is my preference. Thats the great thing about video editing. It turns us all into Bob Ross and we can each have our own little Happy trees. LOL Have a great weekend my friend.

@@AdventureFPV wish was Bob Ross🤣👍

Yeah I wouldn't say this is a great low light camera by any means. I also agree I think the ND filter range is incorrect. I use the lightest one in the package typically

@@AdventureFPV wow thank you your reply. I will use it where it's best at until i upgrade

@@novisfpv Happy flying my friend

@@AdventureFPV since we are here can i ask you something totally different from runcam... I have iflight succex force 800mw vtx and fatshark scout googles , will there be any improvement if i change the stock omnidirectional antenna to something like foxeer pagoda pro or iflight albatross

That's exactly what I want. I can understand why you may want to leave it in auto, but I am looking for consistent exposure.

1.2

Yeah I think I liked the OG one myself.

Seems like you need something better to complain about... This channel is about drones so that is who I targeted my video on my channel to. Sorry if that offended you.

@@AdventureFPV Most people would just watch the video and apply these tips to their setup, but this guy is SICK of it... SMH, Thanks for the tips.

LOL, its all good, must be having a bad day. Thanks for watching.

@@AdventureFPV Sorry if it sounded negative. It was a good video, with tons of useful info. I watched the whole thing, and will use some of it, reference it in the future, as I just bought one of these cams. also liked the video. which I actually like. good job. just saying... It's assumed that everyone is flying a 5" mini quad if you are into FPV. And I was flying FPV before the term existed, built my own tri copter with wood, and tons of fixed wing development. not everybody flies quads... Oh, and I am learning to fly a quad, so far successfully. but I find them so limiting. in sustained speed, range, endurance. space for equipment, payloads, sensors, etc. etc. anyway.. hope you have a great day too.

@@AdventureFPV you are referring to the new definition of "drone". the original definition was a fixed wing aircraft owned by the US navy, and used for target practice. but I digress. .. oh, believe me, there is plenty to complain about in the world. in this case, it was my only complaint about your excellent video. :)