7 Variations of Drippy Slip Application
Рет қаралды 49,891
2 жыл бұрын7 different ways to apply slip, and the effect it has on the pattern.
0:03 Types of Syringe
2:30 Preparing the piece
5:00 Alternating bands
8:54 Alternating within bands
11:04 Marbled fast
15:13 Marbled Slow
16:57 One continuous band
19:47 Individual dots
22:47 Swirly
---
For 10% off everything in my shop use the offer code KZfaq
For examples of my work that's been glazed, check out my Instagram:
/ oldforgecreations
Buy my work, or read more on my blog:
www.oldforgecreations.co.uk/shop
Link to tools: www.oldforgecreations.co.uk/r...
@potterforpeace7906 Жыл бұрын
So often I watch these video's with absolutely no showing of the finished glazed piece, well done on showing the end result. Also, very helpful tutorial.
@Nellian Жыл бұрын
Easily among the most tasteful pottery i’ve seen on youtube, plus i appreciate that you showed your work post-kiln which is a rarity. Thank you! Subscribed
@markfarrar4376 2 жыл бұрын
I really appreciate you taking the time to show your process. Fascinating and unique!
@DawnShipley1977 2 жыл бұрын
I absolutely love the effects that you got on the cup you did right before the swirly cup.
@ruthwest3280 Жыл бұрын
I absolutely love your work, especially this slip technique. I have thrown pottery 25 years ago and quit as life got in the way. I was pretty good but as I just got back into it, I found I could not do anything. Thanks to your videos, it’s starting to come back. Thank you sooooo very much.
@jacquelineengelen3345 18 сағат бұрын
Veel ideeën opgedaan. Bedankt
@annagray6491 5 ай бұрын
Love the results! Thank you for your tutorial.
@timothybeebe6382 11 ай бұрын
This is a really cool project
@charlieevergreen3514 2 жыл бұрын
Thanks for the demos! I also teach, and my demos often go sideways, but people still get the message, and they appreciate seeing how to recover, or that everyone has challenges sometimes. I like the fundamentals of all the techniques, and I’ll test some variations myself!
@embee7434 2 жыл бұрын
Excellent video as always. I love the details you provide. 👍
@OldForgeCreations 2 жыл бұрын
Thanks again!
@nurdan17 Жыл бұрын
Thank you very much. This was very detailed. I think all of them turned out quite beautiful. Thank you for sharing with us. Looking forward to trying this technique.
@Pixel_moon8 2 жыл бұрын
Great video Joe! Thankyou for sharing. Your videos have helped me alot 🙌
@OldForgeCreations 2 жыл бұрын
Great to hear!
@nancyhartshorne6491 2 жыл бұрын
Such a helpful video. I've tried your technique a couple of times but haven't gotten it right. I believe after watching this I'll get it! Thanks!
@adoraaathacreator 2 ай бұрын
So informative. Thank you! ❤
@ItReallyTiesTheRoomTogether 2 жыл бұрын
"Welp... I don't like it." Hahaha. Really good level of detail, super helpful.
@johnnelson7631 Жыл бұрын
Like the process. 😊
@jsdhornby 5 ай бұрын
Superb. Thank you.
@nadiaveronicahalboth5480 Жыл бұрын
Thank you!
@user-gc3zh5bt5b 2 жыл бұрын
You are amazing 👏❤
@gtrapper3745 6 ай бұрын
Thank you !!!
@gguari Жыл бұрын
Thank u so much
@shariebarker4480 11 ай бұрын
The screw type are called en-fit syringes. I recycle them after my son is done. He has a feeding tube and that’s what we use. I love this idea. They are beautiful
@sherrigittel4623 Жыл бұрын
Superb 👍👍👍
@tommyk4623 6 ай бұрын
Great! I love all the slip tumblers you do. Very beautiful. Question - it looks like you don't actually trim the bottom? You leave the piece attached to the bat while you're applying the slip & I don't think you can turn it upside down to trim because you risk the slip flowing the wrong way. Or do you just simply wait until the slip has dryed enough and then trim the bottom? Thanks in advance!
@tombones847 2 жыл бұрын
Do you clean your splash pan before filming?! Or are you just really tidy? Or, worse, am I really messy? Good video btw, going to try this on a big ‘ol vase...
@OldForgeCreations 2 жыл бұрын
I always clean up after I'm done throwing! It's so much easier to clean while the clay is liquid, and it makes throwing the next day a far more enjoyable process
@malinwaldestal1813 4 ай бұрын
Hi how do you make the black slip? Stunning work!!!!
@sharimitchell550 2 жыл бұрын
Thanks so much for sharing your techniques. Absolutely love all of your work. Do you measure the viscosity of your slip, or is it just by feel through experience? 💜💜💜
@OldForgeCreations 2 жыл бұрын
I don't, it's just based on feel. There's a fairly wide range of viscosities that will work for the technique, so it doesn't have to be that precise. The thing to avoid is having two slips of significantly different viscosities in the same application.
@larksie 2 жыл бұрын
I'm curious about the individual dots one, if you left a couple of 'empty' dot spots at the beginning and filled them in at the end, you could sort of blend the two ends of the line together... in my head it makes sense but I'm not sure how it would work out in practice.
@LordAdamGalaxy Жыл бұрын
Well I've just finished drippy slipping two mugs. A lot of work mixing up white/black/purple /crimson slips but it's an experiment. Don't know how I'm going to trim the bottoms. Biggest problem was the syringe. Instead of a consistent flow mine rather squirted and stalled. Maybe a little glycol on the rubber plunger would have helped. Thanks for sharing your work. Raoul
@patti7805 Жыл бұрын
Have you tried running a toothpick gently up or down the sides to see how that comes out?
@silvijaradanovic2592 Жыл бұрын
Which tipe of colour you use? I would like to try it,I love it
@candybenteu8717 Жыл бұрын
Which black Mason stain do you use in the black slip? (Name -number? )
@theabristlebroom4378 2 жыл бұрын
Love your channel. This video highlights a small problem though. You're very soft-spoken, and when you tap repeatedly while talking, it's difficult to hear you. If you do this in future videos, please don't talk while tapping, or else do a voice-over (which would have the benefit of muting the banging noise also). Keep up the good work, your style is eye-catching and you have good content.
@OldForgeCreations 2 жыл бұрын
Thanks for your thoughts
@cerealfede 2 жыл бұрын
I'm guessing that if you would have rotated the syringe while pouring you would have got more "vertical" distortion.
@nightmaregirl06 2 жыл бұрын
Did you feel differently about the drippy slip over the swirly mug after it was fired?
@OldForgeCreations 2 жыл бұрын
I do. I like it more now it's fired, but I'm still not a huge fan of the combination of patterns
@ceramicsbydaniel 8 ай бұрын
Old video mate, but what clay is that?
@nancyalzola9761 2 жыл бұрын
I’m assuming you bisque after the slip/mug has dried. Do you then glaze or is the slip the color?
@OldForgeCreations 2 жыл бұрын
I glaze in clear for these
@toonced 2 жыл бұрын
Would putting slip in vacuum chamber just before application help with the bubble situation?
@OldForgeCreations 2 жыл бұрын
It helps, but the slip is still a bit too thick to get all the bubbles out even in a vacuum chamber. I'm considering a vacuum chamber on a vibration plate
@lttlanarchy Жыл бұрын
@@OldForgeCreations how about holding the syringe pointing down, bubbles will travel to top and away from the nozzle.
@Im2Old4ThisShite 2 жыл бұрын
Have you started making/selling the magma mugs yet? I've been wanting a pair of the giant size with handles, but after months upon months of waiting and checking your website, I've given up hope... 😔
@OldForgeCreations 2 жыл бұрын
I've been selling them for around 4 months now but only when the shop is open. The best way to be notified is to be on the mailing list, but I put the specific time and date in the shop FAQ ahead of time too.
@Im2Old4ThisShite 2 жыл бұрын
@@OldForgeCreations I signed up for the mailing list. Months ago. 🤔 never received one email...
@OldForgeCreations 2 жыл бұрын
I'm sending them out, so either they're being filtered into your spam or you didn't enter your email address correctly.
@Im2Old4ThisShite 2 жыл бұрын
@@OldForgeCreations I'll add it again. I just messaged you through your website....
@user-gr6zi9yh1k 10 ай бұрын
@MarkoVegano 2 жыл бұрын
More great tips. I will be trying these. Thanks. What type of camera do you use? I noticed the depth of field was nicely done to blur out the background.
@OldForgeCreations 2 жыл бұрын
I use a Sony a6400 and a Sigma 30mm f1.4 lens (although generally at f3.5).
@MarkoVegano 2 жыл бұрын
@@OldForgeCreations Thank you so much. I will look for these. 🙂