I said it on Reddit, I really like the verity you put on your channel. Put out stuff you like and are passionate about comes out to us. Not faked hype for the views.

One of the best rc vids I've seen. Done oval rc racing back in late to early 90s watching this makes think am a dinosaur but makes this older be guy to try the straight line very nice video

Congrats dude. I'll probably have the same reaction when I finally hit it.

Love it I have a Dr10 I'm messing around with. Appreciate that you like to help and put out good advice in what direction to try to get better faster. It helps when you don't know were to start.

Really nice build. I'm itching to get into this

Nice my dude!! Congratulations I know the feeling. Good vids keep them coming!

Nice Video Jack congrats on that new PB. That drag slash is ready for some cash days. Running pretty consistently down track. Let's get my dr10 dailed in

Congrats on 70!

Congratulations my friend good info love your channel love all you content 💪👍🔥

I’m hoping for a 70 mph run too. Haven’t been able to make a single pass yet due to rain. Badass video dude!

Wish you lived near the rest of our rc guys you rock and I see your dedication

2:07 the fact that nprc tuning has developed so much since the point of you publishing this video to now where people are pulling the same eta w a vxl is system amazing

Awesome set up

I have a 4wd slash with the 6s MMX system and all the goodies stock lcg chassis. Gtr shocks and so on. Ran 1.7 when I gave it away

Best rc on youtube

Wow man that's quite a lick you put down on a stock slash platform. How high is that chassis off the ground? Also did you limit the shocks?

What do you think of the traxxas telemetry expander with gps vs the gnss analyzer I have both. I'm new at all this so when I bought my drag slash I also bought the telemetry expander 2.0 with gps then I upgraded the motor and ESC and the guy at shop thought the telemetry/gps wouldn't work but it will. I left it off and installed the gnss. I just ordered 10 Guage wire will that be ok or should I get the 8. I have a motiv launch pro 2.5t with a rx8 gen3. Thanks for any help. Keep up the great content brother

Just so everyone knows that Skyfly remote takes EIGHT (8) AA batteries and is one hungry, hungry hippo. They can be modded for lipo however. Nice set up btw.

I been watching good work

I got the same radio still learning how to tune from it.

Love jack do more rc drag things

Well.. you've legit smoked anything I'm running lol need an elco body on the drag slash. Congrats on reaching your goal!

Subbed great work

Was wondering where you got that drag body from and what do i look up for that style of body thanks

Oh snap! Jack's into NPRC? Old school FSS /JDMS/SK guy here.

Cool video hey I’m new to this working on my drag car useing the new bandit rtr chassis, I have the spectrum brushless sensor motor 400kv what gear and spur gear should I use to get 80mph on plus keep it straight

did your GNSS work with your iphone right out of the box? Been having trouble getting connection with the satellites

Awesome build. What are the part numbers for the rear shocks that you have for the drag slash in this video?

You have 1 more upgrade to do before tire sauce. Get ceramic bearings for tans case and wheel hubs. Check out rc speed secrets. They are great bearings and you will notice a difference. Otherwise great progress on this car Jack. Keep up the great videos.

I haven't seen transmitter range that bad in a long time. Great run tho!

I'm trying to figure how you achieved this with no weight up front . Or did I miss something? I running one in a 5700 class and ran a 2.3 on the tree. But I have some weight up front.

Where did you get that body, and can that body fit on a regular stock 2wd slash without modification?

What all products are needed to use the app to get the speed of the car?

How long does a set of rear tires last? I just bought my first drag car and once I learn how to drive it, I am gonna try No Prep racing,

decent bro, good job. i got the same controller, what did you do with your settings on it? if you dont mind me asking.

Did you put out a video for the setup with that noble?

What size shaft. I have a 4.5 turn hole shot that was in a new drag car build I bought, and the motor shaft wobbles. I've read and been told bent shaft, bad bearings. I'm exchanging emails with rotor Ron, but he says it couldn't of left his shop that way. I'm just trying to run the car, and even offered to pay for him to fix it, or sell me the parts as I've never had one of these before. Are these motors worth the money?

Mint

Nice 👍

WHATS UP JACK CECIL DO YO RECOMEND THE FLY SKY NOBLE NB4 OVER THE FUTABA 4PM TRANSMITTER

Jack, why didn't you use 2.5 turn instead 4 turn? I heard some people 4 turn was a better motor, if you bought a4 turn you could just easily bought anything you wanted so is it true about the 4 turns being a better motor? You did an amazing job with a stock chassis rear motor car. I'm going to build one and just be proud to have even if it ran 50mph. Thank you for your time I'm honored !

What is your ride height ? Did you scale the car ? Thanks

so the only stock parts are the chassis and susp? the rest is fully modded out

Nice pass man! Did u have to do any mods to the stock slash to run this body?

Awesome video!!!! THe late night the parking lights on reminds me of old school street racing!!!! Happy RC’ing Y’all 🇺🇸❤️🤘🏽🏁

Freaking awesome

Looks dam fast

Let's goo

what does your tune on the Maclan look like?

Just curious , what brand gyro are you running?

What shocks are you running on your Slash there ?

What body is that called i cant find it online

what kind of shocks in the rear?

It would be cool if there was a 2 speed transmission available.

Exotek twisters man!

What body is that and will it fit a ae dr10 ?

Bring it back we need a update on it

Was it mostly with the change of battery because your car is a rocket

Would you sell your stock esc/ motor or a motor?

May I ask gears for dry tire

Does this mess with the TSM ?

What is the data logger?

I have blue dot reactions, 38 tooth pinion, everything else is stock and we can’t get faster than 2.70. What can I do that stays within boxstock rules. Can’t change electronics or remote. My 8 year is the racer and I’m catching hell getting him to where he can compete with the grown folks. Everyone else is running 2.3-2.5

What motor and esc ? And what size pinion and spur gears are you using please Great video good job

What gearing are you running?

Asome can you Show your drk settings Nice day

When are you gonna take it to some events? I'm sure that car is more then competitive enough.

What app is this too see speed

looks like you can clock that motor as well for more rpm or torque

Niiiiiiiiice

What is the name of the app

Out of curiosity what is your pinion and spur gear size if I could ask

What app is that?

I got drag slash with drk and trinity 4.0 I can’t get passed 2.50-2.60 59-62mph What shocks and springs are you running? Nice run man very impressive 👍

what did u use to extend rear body posts back? and does that body work with stock slash arms all around?

Is it 3s

@CycleCruza is looking into the new SurOn hit him up he’s a KZfaq r you guys should collaborate I don’t know if you still deal with SurOn but you have Ducati and he’s a moto vloger

the range on that radio gear is bad wounder if you could boost the range some how 70mph is chipping

Salut my friend super car super video subscribe subscribe..

- 👍 👍 🔧 -

This video is awesome, however it doesn't represent the authors claims of being a stock Traxxas model.

Jack, what is the make of the gyro you are using. I am new to you videos and think they are great!

I think you take to long between heating the tyres and your launch! Heat them an let it rip immediately!! Great 70mph tho👍 NICE 🦢👍

Whats happened to Marcus he hasn't uploaded in a while

Put some lights on your car . Better to see at night.

Kindly I use the same type of gns but after some time using it I realised that it is not giving the proper readings in my opinion. The faster the car goes the more inaccurate it is. First of all the gns stop reading or calculating before the end of the run so it doesn't calculate the top speed at the end of the run! Secondly the time elapsed to cover the 132ft or 40m it is also not accurate and I think that also not all apparatus are calibrated the same because everyone use his gns and some get better results and when we race together with same cars, the cars with the slow readings overtake the other cars with the better time results. I use to use it to see if I made some improvements but I do not think that it is accurate. I gathered some results and test that I done comparing it with the esc data log, I came to my own conclusion that it could be misleading! This is all my opinion and I could be wrong and stand to be corrected.

What’s the color of the car?

Why is et so important to you

3 days with my drag slash and already want to make it faster 😩

What state are you. Located?

Great video, slick car. BUT those MAXX AMP batteries are the absolute worst packs around. Pls do some research. SMC if you don't wanna read up. Good luck!

Send you stuff? Send me stuff

I should have mph sorry et is the most important

Turn that TSM off

70mph at a 2.3 ya you have no traction at all

Thanks for the hints.. Willing to sale her?