711 Group Head shower screen, Group Head Shower Plate Installation
Рет қаралды 217
2 ай бұрынGroup Head shower screen should be back flushed daily and removed once a week for scrubbing with a brass wire brush.
Group Head shower plate can be cleaned once a week in same manner. Both are held in place with counter sunk screw in center of shower screen It's usually a standard slot type screw that should be hand tightened using a 'Stubby' style screwdriver.
I've shown how to also remove conical gasket and cowling. But this is not required as the shower plate can be removed by wedging a flat screwdriver into the brass center hole. It should just drop out. Only being stuck by dried coffee on base. Don't force it! If it doesn't come out then just leave it and continue back flushing regulaly (twice a day; once at lunch, another at closing.)
Group head shower plate: www.espressoparts.com/product...
Shower screen: www.bing.com/images/search?q=...
@ukeboy57 2 ай бұрын
Another reason the group my not get water is a clogged mesh filter. It looks like a large nut. kzfaq.info/get/bejne/h914m5OXmN6lpWQ.htmlsi=mGkTzX4eR4VfsjD8
@johnnychang4233 2 ай бұрын
Can the grime accumulated behind the brass shower disk prevent from it being disassembled properly?
@ukeboy57 2 ай бұрын
Absolutely! Imagine...Hot thick coffee syrup sits inside a boiling hot metal head. Waiting for the next shot. Which may not come for a while. It hardens and adds a layer of hard residue from previous 100's of shots. Careful tapping of the shower plate will hopefully dislodge the plate and drop out.
@ukeboy57 2 ай бұрын
kzfaq.info/get/bejne/qLxlpamfv5a3aI0.html
@ukeboy57 2 ай бұрын
This is what happens when Back Flushing is not done daily. kzfaq.info/get/bejne/l7BjeZhex8C-gZ8.html
@johnnychang4233 2 ай бұрын
kzfaq.info/get/bejne/d7NgdNhiq9udhJc.htmlfeature=shared
Anyaischuk LIVE
Рет қаралды 12 МЛН
The Neighbor Dominator
Рет қаралды 264