It’s plane to see from your background that you are a real collector!

Thanks for the tip on deepening the depth of cut by tapping the front of the plane. Every other plane video I have seen was always striking the iron.

Thanks for the information, very helpful. I enjoyed your class this past weekend.

Enjoyed this one for sure. I have no trouble hearing you.

That was exceedingly informative!

Love my old wooden planes. Just something very satisfying in how a wooden plane glides across the work.

Between these videos and your books, you are sharing information with us that we aren’t going to get anywhere else. I can’t thank you enough, sir! PS I just watched the tango video. You’re a man of many secrets! 😉

Interesting. I have a few wooden planes made in the late Victorian period (UK). Henry Bessemer’s blast furnace revolutionised steel production, but it was difficult to control exact constituents of steel. A smaller, more controlled method of producing small amounts of steel was developed - the Siemens-Martin open hearth furnace method. The latter was especially suited to machine tools and plane irons. I good quality, late Victorian plane (sometimes early 20th century) iron usually has the symbol for an open hearth, an inverted ‘U’, stamped on it, often the maker’s name or logo is in this shape.

The "Plane I must have" is usually the one I've just spotted in a junk shop or car-boot sale...! In practice I normally have a scrub plane, plus 2-3 each of jack, jointer and smoother on my bench, set to different depths of cut, so I can just switch between them rather than constantly setting and resetting the iron. Feels extravagant - but I didn't pay more than ten quid for any of them and they each have their own special feel.

Thanks for sharing Graham. Your knowledge and "know how" are a treasure to us!

Another great video Graham. As a proud resident of Ayr in Scotland I feel I must point out that your dovetail plane is by Stewart Spiers of Ayr as can be seen on the lever cap at 16.29. I believe that Spiers did make planes for Mathieson’s although Spiers marketing said if their name wasn’t on it, they didn’t make it. Spiers went bust in the 1920’s or early 30’s one of their last efforts being a very poor imitation of a Stanley Bailey plane. Mathiesons lasted a bit longer into the post war period. The dovetailed planes are wonderful pieces of work and great to use. Thanks again for the videos and the books.

I’m beyond excited to spend five days with you at MASW this summer.

Thankyou Graham Blackburn, I love watching your videos. on my wood working journey from nothing to full blown electricity hater i come to view metal planes as big business, a scheme that eventually took the light away from the skill of wood workers making their own tools within the community, shout out to Stavros Gakos who makes his own wood planes and there's a book by John M Whelan on how to do so(free pdf online.) We shouldn't be hunting down old planes but rather be able to craft our own to the needs of each shop and sometimes even piece. the major complaint is time, but it doesn't seem to take much time at all for a skilled craftsmen. where we concern with time we forgo skill and knowledge. part of the dumbing down of America with the racquet of industrialization , slop the hog mentality was instilled in Westerners. I despise this, and point the blame to big business where scalability and greed devalued skilled journeymen and valuable traditions based not on survival or the opportunity cost of consumerism. not intending to take away from the education this video holds but i hope that new and fellow wood workers may have more faith and understanding that they can make a really nice wooden bench planes that work just as good as a spending hundreds of dollars( unless they spent no time making that money to each their own.)

Hi Graham, I cant tell you how good your videos are. They are so informative. Thank you so much for everything you do. Will you be doing any videos in the future of projects you've worked on?

Graham - these are excellent videos. Thanks for sharing your knowledge. Can we get a shop tour video?

Always a pleasure to view and listen to your presentations Graham thank you for sharing your expertise; it makes owning my modest collection of handplanes more enjoyable.

Thank you great clip on planes.

Great video Graham. 16:33 you stated not everyone agrees that the Stanley/Bailey pattern was an improvement with regard to adjustments and damage prevention. I’d like to hear your opinion of that aspect. Also interesting to hear that the corrugation on the sole was to prevent suction. I’d (only) heard it was to make it easier to plane highly resinous woods. I own a 4-1/2C and several flat soled planes. I don’t notice a difference. Keep the videos coming. You’re a fountain of knowledge.

Ordered one of your books. RWB ❤🎉f

Another Amazing Video! Thank you. 🇦🇺👴🏻

I'd love to see you talk about the stanley "bedrock" line, which seems to be what the lie-nielsons are based on. As far as the adjustable frog, my little brain can't make sense of them. Because the bed of the frog is on an angle, the further forward you adjust them it forces the blade out, making for a deeper cut. By the time you retract the blade to compensate the mouth effectively goes back to being open again. I'm clearly missing something.

Good video Graham. Could you move the mic to the top of the apron please. It would be easier to hear you. Thanks

Hello Graham, I've recently moved to the US of A, from the UK and have been slowly building up my tool collection and fitting out my two-car garage as a new workshop. I bought a collection of 25 various wooden planes that are in great condition and all usable. I am keen to follow a more traditional way of woodworking and just came across your KZfaq channel. The content is exceptional, I really appreciate the wooden plane adjustment tips as I was taught with metal planes. I've ordered the guide from the makers of American wooden planes.so that should help shed some light on what I have in my collection. A question, do you teach classes at all? Thanks

Really good presentation on planes. I don't have many wooden planes but I do have several metal planes. I thought I knew a lot about planes but you brought some great insight on all types.

Thank you Sir.🎉

I was surprised to learn you are based in Santa Cruz. I'm in San Juan Bautista.

Looking forward to the video on jigs, thanks!

thank you

thanks

Hi Graham, love watching all you videos, very informative. One question. I have some old wooden planes that I have restored, & they work great. How do you set or lock in the iron? I usually tap on the wooden wedge to set it, then set the the depth by hitting the front or back of the plane. Is this ok to hit the wooden wedge or do I need to even do this?

Hello, been watching your videos for a while. Got some helpful tips. I have been give 3 moulding planes but they all have several woodworm holes. Would it be safe to use them without getting wordworm in my other planes?

I found a wooden coffin shaped plane with a metal sole earlier. Special purpose or just unusual?

💯💯💯💯💯💯💯💯💯💯💯💯👏👏👏👏👏👏👏👏👏👏👏👏

Technically speaking flatness of a sole isn't a guarantee for a flatness/straightness of a piece. Ends of a piece tend to get more material removed, so too much planing or jointing without checking almost guarantees that the piece will be high in the middle.