30% OFF Fiero Lambo Doors Installation Guide by Vertical Doors Incorporated

Рет қаралды 10,956

6 жыл бұрын

To get 30% off MSRP for Vertical door kit VDCPONFER8488, use promo code "7979" at the following website during checkout: verticaldoors.com/products/po...
Additionally, you can call 951.245.8669, ask for Nick, use promo code 7979, or mention Austin sent you.
Amazon Recommendation Store for 3800s/Fieros/Tools amzn.to/3hNViaa
3800sc Instructions www.fiero.nl/forum/Forum2/HTML...
3800sc Instructions MOBILE drive.google.com/file/d/1wqUJ...
eBay affiliate (use & I get paid) ebay.us/4gTj2A
Donate to me www.paypal.com/donate/?busine...
Join channel membership kzfaq.infojoin
Subscribe kzfaq.info?s...
Consulting on Facebook / fieroaustin
VDI offers great support if you order directly from them.
a.k.a. lambo doors and scissor doors
This kit has been reworked with V8 Archie and is considered a "bolt on" kit now.
There are many ways to do this installation. If you are willing to attempt this installation yourself as guided by this video, you assume all liability whatsoever.
Skip to Hinge Install @24:28
Tools I used:
Welder
Angle Grinder & Cutting Wheel
Pry Tool
Crow bar
Bent nose pliers
Wire Cutters
Flathead Screwdrivers
Philips Screwdrivers
Thin profile 1/4" drive wrench
3/8" drive impact wrench
3/8" drive swivel ratchet wrench
swivel sockets
Socket Extensions
7mm sockets
10mm sockets
13mm sockets
15mm sockets
T30 Torx bit
10mm Gear Ratcheting Box Wrench
13mm Gear Ratcheting Box Wrench
Electrical Tape
Duct Tape
Masking tape
Permanent Marker
Red Loctite
verticaldoors.com/collections...
This Discount Code is brought to you by "7979"
Cannot be combined with any other offers, discounts or promotions. Kit must be at MSRP. Offer does not include shipping.
Certain other restrictions may apply. Please see below for other details.
Contact Vertical Doors, Inc. for full details
Este codigo de descuento es presentado por "7979"
No se puede combinar con otras ofertas , descuentos o promociones . Kit debe ser al MSRP . La oferta no incluye el envio.
Contactar a Vertical Doors, Inc. para todos los detalles
Pontiac Fiero 1984-1988 Vertical Lambo Doors
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network and Amazon Associates.
#3800 #supercharged #fiero #3800sc #3800supercharged #pontiac #pontiacfiero #fieroaustin #howto #3800fiero #superchargedfiero #engineswap #fierogt #L67 #L32 #affiliatemarketing #affiliate #engineconversion #verticaldoors #verticaldoorsinc

Пікірлер: 44

@FieroAustin 11 ай бұрын

To get 30% off MSRP for Vertical door kit VDCPONFER8488, use promo code "7979" at the following website during checkout: verticaldoors.com/products/pontiac-fiero-1984-1988-vertical-lambo-doors-kit Additionally, you can call 951.245.8669, ask for Nick, use promo code 7979, or mention Austin sent you. VDI offers great support if you order directly from them. This kit has been reworked with V8 Archie and is considered a "bolt on" kit now. There are many ways to do this installation. If you are willing to attempt this installation yourself as guided by this video, you assume all liability whatsoever. Skip to Hinge Install @24:28 Tools I used: Welder Angle Grinder & Cutting Wheel Pry Tool Crow bar Bent nose pliers Wire Cutters Flathead Screwdrivers Philips Screwdrivers Thin profile 1/4" drive wrench 3/8" drive impact wrench 3/8" drive swivel ratchet wrench swivel sockets Socket Extensions 7mm sockets 10mm sockets 13mm sockets 15mm sockets T30 Torx bit 10mm Gear Ratcheting Box Wrench 13mm Gear Ratcheting Box Wrench Electrical Tape Duct Tape Masking tape Permanent Marker Red Loctite verticaldoors.com/collections/pontiac-fiero/products/pontiac-fiero-1984-1988-vertical-doors This Discount Code is brought to you by "7979" Cannot be combined with any other offers, discounts or promotions. Kit must be at MSRP. Offer does not include shipping. Certain other restrictions may apply. Please see below for other details. Contact Vertical Doors, Inc. for full details Este codigo de descuento es presentado por "7979" No se puede combinar con otras ofertas , descuentos o promociones . Kit debe ser al MSRP . La oferta no incluye el envio. Contactar a Vertical Doors, Inc. para todos los detalles Pontiac Fiero 1984-1988 Vertical Lambo Doors Amazon Recommendation Store for 3800s/Fieros/Tools amzn.to/3hNViaa 3800sc Instructions www.fiero.nl/forum/Forum2/HTML/139530.html 3800sc Instructions MOBILE drive.google.com/file/d/1wqUJdMZ1XqcKJzC-2ZzbvLYMYE3QbmVq eBay affiliate (use & I get paid) ebay.us/4gTj2A Donate to me www.paypal.com/donate/?business=8AFWKBTBVSKTJ Join channel membership kzfaq.infojoin Subscribe kzfaq.info Consulting on Facebook facebook.com/FieroAustin/

@stansmith4054 3 жыл бұрын

Never realized how much work is involved! Holy crap!

@FieroAustin Жыл бұрын

Remembering back, I don't think it was that bad. Yeah it took a while but nothing was terribly difficult to pull off.

@REPTARisaG 5 жыл бұрын

I so want to do this to my 87 Fastback, I'm saving this to my Fiero playlist

@FieroAustin Жыл бұрын

ever get it done?

@jasonhook1537 Жыл бұрын

I just checked out the website and holy crap the kit is over 1200 dollars

@FieroAustin Жыл бұрын

use code 7979 for 30% off!

@ramseyzakaria1333 Жыл бұрын

I don’t even have a fiero not sure why I watched this, great video either way :)

@FieroAustin Жыл бұрын

lol thanks!!!

@stansmith4054 2 жыл бұрын

Wow!!! There is no way I would have the patience to do this! I will just look into buying a Lambo Countach kit car on the Fiero frame.

@FieroAustin 2 жыл бұрын

Surprisingly it wasn't that bad of a job as I recall. There's other tricks than the welding job I did, but I think they would be trickier. They are fun and definitely turn some heads. Could use a but more adjusting and tweaking here and there though.

@electronicgrandpa7974 29 күн бұрын

kit arrived last week,savedup for a while to get, ive watched ur video x2,still 2 scared 2 attempt...im not mechanically inclined, but im about to try tomarrow.

@FieroAustin 29 күн бұрын

well good luck! This was the first major thing I did to the Fiero. Took a long time but it's not too terrible. Just take it one step at a time.

@electronicgrandpa7974 27 күн бұрын

@@FieroAustin im up to the "weld" part!

@FieroAustin 26 күн бұрын

@@electronicgrandpa7974 Good luck! That was not as difficult as I had imagined, but definitely make sure those welds are solid and the door does not move.

@lesblocker 10 ай бұрын

Doing this kit now. Thanks

@FieroAustin 10 ай бұрын

awesome thanks for letting me know. FYI depending on temperature, my fenders can rub the door skins a little. Needs some fine-tuning adjusting that I never showed in the video.

@ouiroc 6 жыл бұрын

Awesome video one thing make sure you c all your glass and interior parts before you grind or weld usingthe headlight on the video was a stroke of Genius

@FieroAustin Жыл бұрын

thanks bro!

@hloretero 11 ай бұрын

I think your video was great thank you for making it I’ll watch your other ones as I get time I just got a Fiero so I am going to do the Lambo kit. Also, can you tell me after having them on there for a while now can you think of anything that you would’ve done differently or some final thoughts after having them for a while?

@FieroAustin 11 ай бұрын

thanks man. Yeah, I am not 100% sure how to adjust it, but my fenders still catch on the door panels when opening the normal way in the hot summer. I maybe could have moved the hinges back more to get them to clear, not sure. Takes some messing with. Also they are very heavy FYI.

@pbpunisher99 Жыл бұрын

I would really love to do this. But I really want to get a paint job for my 87 3800 swap first. Probably better to do it before the paint job, but don't think I can swing both this year.

@FieroAustin Жыл бұрын

gotta take a lot off the car in order to get em installed. might want to do before paint. good luck either way!!!!

@Tmiester9708 3 ай бұрын

I put this kit on my 86. Love the kit and i used your promo code. Your video helped with the install a lot so glad that you are making these videos. I had to make new fender trim because of having the ribbed trim. I matched the angle of the trim on the door for the door side of the trim I 3d printed them out of petg. my only complaint is that mine don't go up by them selves not sure if my doors are heavier with the reupholstered door panels. If I push the door up it does stay up and it operated by itself with the door skin and the interior panel off. Have you had any experience with this problem. I hope to see you at The Heartland Fiero Show this year.

@FieroAustin 3 ай бұрын

oh man awesome. When around did you purchase the kit?? Mine don't go up by themselves until after a certain point with all the door skins on.

@Tmiester9708 3 ай бұрын

I got the kit end of march this year and I instaled it over easter weekend was a great time to tuch up the paint on the trim and rockers and fix all the broken clips. next I think im goint to do the dew wipes.@@FieroAustin

@FieroAustin 3 ай бұрын

@@Tmiester9708 Awesome. Good luck!!!!

@franktedeschi5331 4 жыл бұрын

Hey Austin love the way the car came out. I’m doing a 3800 swap while I’m waiting on parts I was going to rebuild the doors. Do you still recommend the brackets. Are there any cons.

@FieroAustin 4 жыл бұрын

They are still working the same after 2 years. Only con is in the winter the panels are a little smaller and sometimes interfere with the way the door opens. Could adjust more to take care of it but I just let it rub.

@franktedeschi5331 4 жыл бұрын

Can you get in and out of the car without swinging up the doors. And do you think she is still honoring the 30% off

@FieroAustin 4 жыл бұрын

@@franktedeschi5331 Yes and yes! The doors do not swing out as far as before though.

@darrinbunston5932 4 жыл бұрын

Does the Lamborghini doors have to come out from the car before they go up looks like they have to come halfway open before they go up on your application

@FieroAustin 4 жыл бұрын

yes they must swing out and then up.