8 Awesome 3D Prints That Will Blow Your Mind! 3D Printed on the Elegoo Neptune 4 MAX 3D Printer

Рет қаралды 95,919

Ай бұрын

Here are 8 Cool 3D Printing models that you can print today! Check out todays video sponsor @ElegooOfficial Check out their affordable 3D Printers Here: bit.ly/3wej5rl
All these models can be found over on the @stlflix Website here: www.stlflix.com/
#3dprinting #3dprinter #3dprinted

Пікірлер: 79

@Ulthane-40k 3 күн бұрын

The now layer lines is crazy

@axelhopfinger533 Ай бұрын

Aaahh, nothing like some 3D print and chill after a hard day!

@WildRoseBuilds Ай бұрын

Thanks for watching 🙏🏼

@axelhopfinger533 Ай бұрын

@@WildRoseBuilds You keep making these quality videos, i'll keep watching . Deal?

@mszoomy Ай бұрын

The filament you used for the dragon is gorgeous

@WildRoseBuilds Ай бұрын

Yes!!! 3D Jake matte orange eco pla

@theferreira8632 Ай бұрын

Nice video. Would appreciate the list of 3d model names of the stl's from stlflix. Thanks

@hotfix7387 Ай бұрын

I have to say that out of all of the 3D model printing channels you all have the best models, best music, and best time lapses. I wish I could put a bunch of your videos together and just have them in one long 2 hour block that I could put on when I am puttering around the house as they are awesome and soothing at the same time. One question for you on the incense burners as you have done a few - I printed one not too long ago that has a tiered shelving effect and it's awesome with the smoke flowing down with fluid (I'm excited to try some of your others). I put the metal washer in like you did on your various prints, and it sort of melted into the top of the print. That and there was an extra smell like the plastic was almost burning (it wasn't), but considering the metal disc was melting into the print something clearly was happening that was sub-par. I wanted to see if you ran into either of those scenarios and if you did what you did to potentially address them. Please keep up the excellent work.

@WildRoseBuilds Ай бұрын

Thanks for the kind words!! I usually pull the incense cones off before they fully burn down. I think the down draft cones tend to leave a little residue that has a weird smell. Maybe some left over oils or something. Petg would probably hold up better but I haven’t had any of these melt yet 😉

@mundanestuff Ай бұрын

A really interesting collection of prints. Love the laminar flow incense. Cool stuff.

@ceziukozak 23 күн бұрын

Well tuned printer. I come back to this channel from time to time. Relaxing experience - watching your timelapses sir.

@WildRoseBuilds 21 күн бұрын

Thanks for watching! I appreciate it

@joesabourin9426 Ай бұрын

Fellow Albertan? This is really impressive, thanks for sharing!

@diyfireking Ай бұрын

How awesome 😍😍

@jnce26 Ай бұрын

You could make a video with gift ideas for Mother's Day.

@Spinnydude Ай бұрын

Can you do a video on what software you use and the settings becuase those prints look incredible!

@Cayden-km7tb 14 күн бұрын

Just wondering will the incense holders work with sticks or does it have to be cones?

@patriotfett Ай бұрын

Ummm where can i find those stl files and what was that glue uou used

@khanhle-uc1yq 13 күн бұрын

Whats your retraction settings ?

@737AMT 11 күн бұрын

Anybody know what material would be best to 3d print sockets for driving bolts/nuts?

@jokr7818 Ай бұрын

What type of fillament you used for the horns of the dragon? That looked amazing.

@WildRoseBuilds Ай бұрын

That was clear amz3d pla. Turned out really cool!

@moondoggie1987 Ай бұрын

For the dragon skull that you put the light bulb into would it work better with leds for weight and a cleaner wall hang look?

@FrostWolfPack 13 күн бұрын

Very true I was about to comment on that as well. Either have leds as you said or juse enough coverint paint to mask the lamps glow trough the skull. But I think mixing the paint and the leds would give the best results

@peterclegg2609 Ай бұрын

Still the time lapse king, has the extruder been sorted after the initial leaks and problems?

@mritzcu Ай бұрын

Nicely done, that is dope. What are the smoke things that you use?

@Matthew_Lawless 14 күн бұрын

Backflow incense burner cones

@KayakingVince 11 күн бұрын

Make your own easily kzfaq.info/get/bejne/Y8yFrcaTna7SpIk.html

@ChristopherPBacon69 Ай бұрын

What infill type do you use for the prints? Im still quite new to FDM pronting and just use gyroid.

@WildRoseBuilds Ай бұрын

I use supportive cubic. Lets you use less density while still being able to print internal overhangs!

@ChristopherPBacon69 Ай бұрын

@@WildRoseBuildsamazing thank you! It looks like it will save a lot of time and filament!

@bosssrg8007 3 күн бұрын

What’s the name of the last print

@theobabich7956 19 күн бұрын

How do I get my supports to come off like that?!?!?

@mei5x Ай бұрын

Will you one day make designs for consoles or PC towers?

@WildRoseBuilds Ай бұрын

I hope so!

@tonywharton5220 Ай бұрын

Disappointed Joel. No dice tower? Not good. My favourite was definitely the dragon lamp ✌️

@WildRoseBuilds Ай бұрын

More dice towers to come do t you worry haha! Thanks for watching

@drekkis12 3 күн бұрын

can i get your settings

@konsolartz563 Ай бұрын

whats your support settings ?

@WildRoseBuilds Ай бұрын

.15mm contact ✨

@Normandy616 14 күн бұрын

Please stl dragon cup!!! Please 🙏

@MsGsmart Ай бұрын

tell me what kind of candles these are?

@WildRoseBuilds Ай бұрын

These are down draft incense cones!

@RASbit Ай бұрын

Everyone is wondering what kind if filament, software, and settings this person is using. I'm just wondering how they made a time laps without showing the filament extruder.

@marinaatkin1581 14 күн бұрын

There's a trick to it, after each layer finishes the print head goes back to the home position, then the picture is taken, then the print moves on to the next layer

@leka1b901 Ай бұрын

Cutting holes with a soldering iron is the strangest thing here. Could just edit it intead of breathing fumes and covering the iron in plastic soot

@kitotek 10 күн бұрын

the only thing in this video that blew my mind is the amount of incense this guy uses

@freerideshuttle Ай бұрын

I love how those prints look finished, the only thing I'm looking a bit concerned is that I'm more into practical parts, I love to see someone rebuild an angle grinder part, a cover/carter from a scooter that is missing, pannels and door handles for cars and stuff like that, practical building, or even more industrial use like vaccuum tunnels for parts, gears for line feeders, all stuff that I mostly consider. More the use of chlorine and fluorine addition into materials for chemistry put into filters screws that don't crack under heat and corosive ambients, or self lubricant parts like sliders, wheels, gears, and so on.

@Solobusn Ай бұрын

You can definitely print some of those items ideally in a stronger material. I designed and printed a pool skimmer flap in petg and it’s being used in a chlorine pool for the past 3-4 years. It’s still holding strong. The material used will depend on environment and use case. I mainly follow designers that do functional parts in 3d printing.

@Joshua-ju5uc Ай бұрын

The incense model is nice BUT how is it that the material doesn't melt from the heat of the incense? Cause I've tried to make my own looking like a Dino Graveyard using this Technique with the washer. But the material melted from the heat of the incense and the washer. Like a hot knife

@francesca5295 11 күн бұрын

maybe he used abs instead of pla, from what i gather ABS is heat resistance

@shadydaemon4178 15 күн бұрын

That last one we can see doesn’t work that well, will definitely need improvements.

@allengrier4767 Ай бұрын

The only thing mind blowing was the editing to remove the print head.

@shelbyseelbach9568 4 күн бұрын

No editing at all. A picture is taken after each layer with the print head moved out of the shot.

@patresk95 21 күн бұрын

What are those scented smoking little bullets called?

@vixwolf2037 11 күн бұрын

Secnted smoking bullets = Backflow incense

@vixwolf2037 11 күн бұрын

They are known as backflow incense

@patresk95 11 күн бұрын

@@vixwolf2037 thank you :)

@supremegodemperorpalpatine4872 19 күн бұрын

A flagon with a dragon...

@oriwan3786 Ай бұрын

that dragon 8:38 was really disappointing, you could have sliced the holes easily in slicer app before and printed with the holes

@WildRoseBuilds Ай бұрын

Totally! I didn’t have the idea to put lights in it until it was already printed. I will revisit that one for sure. No infill, more walls to block light, and a proper bulb mount. Thanks for watching!