8 beeps and black screen Dell Inspiron N5010 VGA Fix

Рет қаралды 250,790

7 жыл бұрын

Warning!!!! Do this at your own risk. 8 beeps and black screen Dell Inspiron N5010 VGA Fix.
Best Laptops With Good Specifications:
www.computertipslaiju.com/sea...
here is the solution for Dell Inspiron N5010/N5110 black screen and 8 beep problem.
Related Videos:
8 beeps and black screen Dell Inspiron N5010 VGA Fix
• 8 beeps and black scre...
LG Keyboard replacement: LG P420 or LGP42
• LG Laptop Keyboard rep...
Broken LED Screen Replacement hp 2000
• LED Screen Replacement...
toshiba satellite L510 power jack repair
• Toshiba Satellite L510...
TOSHIBA SATELLITE C 50 Hard Disk Replacement
• TOSHIBA SATELLITE C50 ...
Sony VAIO VGN CS36 CPU Fan Repair
• Sony VAIO VGN CS Serie...

Пікірлер: 138

@ELSYDLEY5 5 жыл бұрын

Fantastic. Worked a treat. Will see how long it stays fixed. Obvious a dry solder joint that developed and reheating has re-joined the solder. Only difference on my Dell was that the key board had 2 pieces of double sided tape under the W and R key area which required me to slide a credit type card under the key board to break the stick.

@ericbrown4682 5 жыл бұрын

try press nd hold letter D and press power.. if its still beeps turn off laptop nd repeat.. i have done this for 2 hrs and then my laptop started doing screen test and now its working fine.. :-)

@mandeyepants 4 жыл бұрын

No idea why this worked but truely grateful that it did. Thank you for sharing.

@mdshadmanahmad 5 жыл бұрын

If your screen is completely dark and power+D doesn't work for you may have loose connection of the flex cable i. e, display cable that connects the screen to the mother board at either ends . Try opening the laptop and properly connect the cable

@istvannagy6568 5 жыл бұрын

Thank you for uploading this video, it worked perfectly.

@jimsiler4908 3 жыл бұрын

Good instruction. I was getting the four beep code and no screen but before replacing any ram remove and reinstall each stick and try start up. Worked for me.

@GotchaAhu 5 жыл бұрын

What he did is called reflow.. It solve the problem just for while.. The problem will return for sure.. The correct mode to repair definity is reballing the graphic chipset with new solder.. Good technician use this method only to see if the problem is really the chipset's solder.. If the laptop return to life like this video you should reballing the chip with a new esphere solder and resolder again in the motherboard.. After that the laptop will work for many years again