8 Different Ways For Creating and Protecting Mosaic Edges

Рет қаралды 31,930

4 жыл бұрын

in this video I will show you 8 different ways that you can do to protect and create your mosaic edges and along the way tips to make it easier to create those edges. For links on products and videos please click the button below "Show More"
=====================================
As an Amazon Associate I earn from qualifying purchases. (At no extra cost to you)
This helps to keep the channel going. Thankyou. :)
My Amazon Store where I list products that I use or similar products that I use
www.amazon.com/shop/treasuryroad
=====================================
For business enquiries on reviewing products or for sponsorship please send an email, the email address is in the about page of this channel.
=====================================
Donation Link - Helps to keep the channel going with materials and equipment - Thankyou
ko-fi.com/treasuryroad
=======================================
Connect with me by subscribing to the following
www.treasuryroad.com.au
/ treasuryroad
treasuryroa...
www.pinterest.com.au/abeb96f2...
=======================================
Disclaimer
Videos produced by Treasury Road and all material provided within this website is for informational, educational, & entertainment purposes only. The video and all included information does in no way constitute the provision of professional advice.
Some of these projects, materials, and techniques may not be appropriate for all ages. Treasury Road does not guarantee or make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Users should seek appropriate independent professional advice prior to relying on, or entering into any commitment based on material published here, which material is purely published for reference purposes alone.
You agree that use of this information is at your own risk and Treasury Road cannot be held liable for any losses, liabilities, injuries or damages resulting from any or all claims.

Пікірлер: 53

@FranDrosman 22 күн бұрын

I continue to watch your videos. Thank you for sharing all your valuable knowledge.

@TreasuryRoad 22 күн бұрын

Thankyou so much Fran appreciate the comment and thanks for watching them. 😊

@theresaglass1831 3 жыл бұрын

I’ve watched a lot of mosaic videos and your the first I’ve finally found that addresses the finishing of the edges, plus finishing the back and how to hang it. Thank you so very much! I’ve just started watching your videos and after only a few I have learned so much. 😉👍

@TreasuryRoad 3 жыл бұрын

Thankyou so very much, l hope you enjoy the other videos and Thankyou for watching them. 😊

@sandraleenerts6805 2 жыл бұрын

I appreciate the details you address. You have answered many questions I did not realize I had been thinking about. You are a wealth of knowledge, and so willing to pass that knowledge on.

@TreasuryRoad 2 жыл бұрын

Thankyou so very much Sandra, really appreciate that and thankyou for watching. :)

@cw4608 3 жыл бұрын

There are several talented mosaic artists with KZfaq channels, but you have both artistic talent as well as the talent of teaching.

@TreasuryRoad 3 жыл бұрын

Aww Thankyou so much Carole, really appreciate that, I just try my best. :)

@cherylk6752 4 ай бұрын

Thank you for the great ideas.

@TreasuryRoad 4 ай бұрын

Thankyou so much Cheryl glad you enjoyed it. Appreciate the comment. 😊

@pennyfield203 4 жыл бұрын

Thank you for sharing these ideas, Peter; definitely one I needed advice on! Just love you creativity and beautiful pieces. : D

@TreasuryRoad 4 жыл бұрын

My pleasure and thankyou appreciate that. :)

@sundaysunshine2925 3 жыл бұрын

I appreciate the depth of information in all your videos . Thank you .

@TreasuryRoad 3 жыл бұрын

Thankyou so much Sunday, appreciate that. :)

@donnadiesburg7451 2 жыл бұрын

You describe how to edge a mosaic , which is awesome. You think of everything ! I love your channel I subscribed & like every video I see of yours. Plus you surely have an eye for beauty .Thanks!

@TreasuryRoad 2 жыл бұрын

Thankyou so much Donna , that's very kind of you to say that. Appreciate your continued support very much. :)

@davidhill1220 2 жыл бұрын

Love your videos Soo helpful Thanks so much Patricia

@TreasuryRoad 2 жыл бұрын

Thankyou so much Patricia, appreciate that. :)

@cindyokubo4494 Жыл бұрын

Great idea for the pattern in apoxy sculpt!

@TreasuryRoad Жыл бұрын

Thankyou Cindy and thanks for watching. :)

@Jan1962E 4 жыл бұрын

I love this video! You are a great teacher. Please share where you purchased the bird substrate .. Thank you :)

@TreasuryRoad 4 жыл бұрын

Thankyou very much, the birds I sell them on my Treasury Road website page. :)

@alexia5316 3 жыл бұрын

Thanks for this Peter! I have some Kerdi board that I wanted to use indoors so I didn´t want to use thinset as an adhesive and was wondering what to do about this edges. The epoxy sculpt is a really good idea! It seems you don´t need mesh before using that right?

@TreasuryRoad 3 жыл бұрын

I don’t know what Kerdiboard is but when l have used it on Marmox board it wasn’t an issue, l would suggest doing a test first. If the edge is dusty you may need to wipe it down or get some adhesive tape and stick it onto the edge and then remove it to get rid of the dust. 😊

@alexia5316 3 жыл бұрын

@@TreasuryRoad I actually tried it yesterday and it seems to have worked!

@TreasuryRoad 3 жыл бұрын

@@alexia5316 That’s great it does adhere to almost everything. 😊

@turtlelu6766 4 жыл бұрын

Hi Peter. At what point during the process do you edge with epoxy sculpt.....before or after grout? Thank you for the great videos. They have helped alot as I am self taught.

@TreasuryRoad 4 жыл бұрын

Thankyou very much, appreciate that. Thats a very good point, its a personal choice it depends if you want the top tess to be flush with the outside, you would AS the sides first but if you want the side to protrude you would do it last. But theres really no right or wrong it just depends on the look you are after. :)

@turtlelu6766 4 жыл бұрын

Sounds like I will be trying both way. Thanks again.

@susanbarell8652 2 жыл бұрын

Hi Peter, thank you for your great, informative videos. I have made a mosaic mural (4’ x 3’) for outdoors. I found the Laticrete sanded grout in many colors and am done grouting, but I want to clarify the edging process. I used Wedi board that is about 1/2 “ mounted (with gorilla glue) on weather treated plywood as the base. So, can I just edge with the epoxy sculpt or do I need to apply the mesh & thinset? Also, do you have videos on how to hang mosaics or create large easels for displaying mosaic murals? Mine weighs about 50 lbs. and I’m not sure how to display it outside. Thank you for any advice you can give.

@TreasuryRoad 2 жыл бұрын

Thanks so much Susan, I cant answer specifically to your job as there are far to many variables like any job that I cant see. I have never used Gorilla glue on a job and any wood including marine grade plywood which will generally not have longevity to it if the piece is outside as it interacts with the environment its in regardless of how much prepping is done to it. If I am reading this correctly you have adhered the plywood to the back of the Wedi board to create a thicker substrate if this is correct I would have used thicker 20mm Wedi board and skipped the plywood. I would definitely consider using Apoxie Sculpt rather than the thinset for the edge but how well its actually going to work is another thing as the weakest link will be the Gorilla Glue and the plywood, do a small test first to ensure it bonds well and make sure the edges are free of dust. If you had just used Wedi board then the mesh and thinset is done first and then the substrate is mosaicked. Generally if you are hanging your piece hangers would be added first before mosacking to Wedi board, I would have considered the French Cleat system. I have videos on all these procedures, take the time to go through them carefully starting at the start. :)

@susanbarell8652 2 жыл бұрын

@@TreasuryRoad thank you for your quick response. Gorilla glue is ridiculously strong so I won’t be able to remove the treated plywood at this point without damaging the mosaic. I live in New York and we have snowy winters here, so will probably put it in a sheltered location or bring it inside during bad weather. I bought the epoxy sculpt and will do a test first. Thanks again for your advice.

@TreasuryRoad 2 жыл бұрын

@@susanbarell8652 Thanks Susan. Bringing it in may help you as the conditions any mosaic is in can take its toll on a piece, yes I wouldn't think you will be able to separate the two pieces now they are adhered together. :)

@joannechris0 4 жыл бұрын

Can I check Peter..do I need to use the tape around the edge..if the Marmox board is only say 6mm/10mm? Or do I just use thinset to finish it..without the tape? Another great video..thanks!

@TreasuryRoad 4 жыл бұрын

Thankyou so much. I wouldn't worry about it on 6mm and you can probably get away without it on 10mm, try a piece of scrap Marmox without the tape and see what you think on the 10mm. Many dont use the tape at all but it helps add strength to the edges. :)

@joannechris0 4 жыл бұрын

Treasury Road thanks Peter..will try it out and see what it looks like finished with just thinset!

@anna-nn4ix 9 ай бұрын

Thanks so much. Can you tell me if I want to use tesserae for the edges of a piece …do you do the edges first or last if not using epoxy clay…to make them meet evenly…especially for a tabletop ?Thanks

@TreasuryRoad 9 ай бұрын

Thankyou so much Anna. Its a personal preference some people mosaic the edges of their pieces and others don't, some mosaic the edges last. Generally the edges are done first on a mosaic so as you don't see a grout line on the front where the tiles on the sides meet the top. If you're using a sanded grout you definitely dont want that exposed on any edges because that can chip off because its really a filler. Some people will just grout the side of a mosaic however that's not really best practice. The manufactures have the maximum grout line widths that their grout should not exceed. Thanks for watching and commenting. :)

@mozhdehnouripayam9470 4 жыл бұрын

Thanks Peter for this video. Can I use black Grout instead of using paint for edging? Another question is about apoxy sculpt. Can I paint it or is it durable for out side?

@TreasuryRoad 4 жыл бұрын

Grout shouldn't be used for the sides as it doesn't have any adhesive properties, it can chip off or fall off further down the track. You dont have to paint Apoxie Sculpt if being used outside that will not effect its durability. :)

@mozhdehnouripayam9470 2 жыл бұрын

@@TreasuryRoad , is there any other color for apoxy sculpt? Or can I use acrylic paint for coloring it for inside?

@TreasuryRoad 2 жыл бұрын

@@mozhdehnouripayam9470 Apoxie Sculpt comes in other colours but the natural coloured one has the best adhesives properties, I believe it can be painted and stained, you can go to the Aves website for more information. :)

@jaycee571 Жыл бұрын

Hi Peter, I'm wondering whether I could stick beach pebbles to sealed wood using cement based adhesive for indoor use? I have made home made mesh substrates layered with cement based adhesive, but can't figure out how to put them in a frame once I have stuck beach pebbles on with thick adhesive.

@TreasuryRoad Жыл бұрын

Hi Jay, I am not sure what you mean. I would create a post in a couple of the mosaic Facebook groups with photos. The photos will help show what you are trying to do without anyone guessing. :)

@jaycee571 Жыл бұрын

Thanks Peter. FB! Good idea I'll do that. I think after reading other comments, I need to purchase some wedi board instead 😄 thanks for replying 🙏

@stephaniebenson5816 Жыл бұрын

Hi Peter, please may I ask what substrate is the bird in this video. I find cutting out with a hand jigsaws difficult. I was thinking of purchasing a scroll saw. I'd like your opinion, please . Steph

@TreasuryRoad Жыл бұрын

Hi Stephanie, the bird was cutout of MDF. Using a jigsaw works well but for small items it can be a little fiddly, I did own a scroll saw and it took a bit of getting used to for small pieces however it worked well. Because I was selling these shapes these were commercially cut but I was using a scroll saw originally to do the test samples. Thankyou for watching and commenting. :)

@stephaniebenson5816 Жыл бұрын

Can you please share were you purchased these items

@TahloolaDarlin 3 жыл бұрын

Are you saying weedy board?

@TreasuryRoad 3 жыл бұрын

Im not sure what you are referring to but I did mention and use Wedi board in this video. :)

@judithstodola5521 3 жыл бұрын

I love your videos but this one kicks in my motion sickness because of your constant hand movement. If you could keep your hands on the table, that would help us all. Thanks!

@TreasuryRoad 3 жыл бұрын

Thankyou so much, I will keep that in mind. :)