80 Series Land Cruiser DIY drawer system **DETAILED**

80 Series Land Cruiser DIY drawer system DETAILED

Рет қаралды 5,672

7 ай бұрын

Building a custom drawer system in my 80 series land cruiser with 80/20 extruded aluminum & wood
80/20 extrusion
www.tnutz.com
Drawer Latches
amzn.to/47NZb3J
Drawer Slides
amzn.to/3TlNb5o
Plastic Trim
amzn.to/3GkLuxv
Carpet
amzn.to/3uCljjm
Fuze-it adhesive (I believe this was cheaper at Lowes)
amzn.to/3sXwvX1
Brackets used for drawer latch catch
1.5-in x 0.5-in x 1.5-in Black Steel Corner Brace (4-Pack) www.lowes.com/pd/ReliaBilt-Re...
Turn Buckles
amzn.to/3SZaou1
Craftsman Bundle with Pneumatic Staple & Finish Nailer
6-Gallons Portable 150 PSI Pancake Air Compressor with Accessories www.lowes.com/pd/CRAFTSMAN-3-...
#80series #80serieslandcruiser #Diy #custom #tutorial

Пікірлер: 40

@loicleray 4 ай бұрын

Criminally underrated. Love this series. Keep 'em coming!

@Adv4x4 4 ай бұрын

Thanks man!!

@DuanDao 5 ай бұрын

Really great walk through. Been wanting to do this on my 100 series but wasn’t sure how to go about it. Thanks for the video

@Adv4x4 5 ай бұрын

Thanks for watching!

@Keasbeysknight 7 ай бұрын

Great video and excellent build quality. that extruded stuff is super cool but it sure is expensive! i bet you saved alot on weight though.

@Adv4x4 7 ай бұрын

Thanks man! It really is awesome stuff to build with. The extrusion itself isn’t too badly priced they get you on the corner connectors and hardware! Haha.

@mikemorgan4670 6 ай бұрын

Great work Buddy. Always a pleasure watching your content. Small suggestion, using an artists canvas stretcher might help in getting a nice taught carpet install.

@Adv4x4 6 ай бұрын

Thanks Mike! Not a bad idea at all!

@TheCajunGaijin 2 ай бұрын

Putting aluminum angle iron across the front would protect the front edge from the carpet being torn off, and would also hide that black bracket for the lock. I wonder if it's not easy enough to incorporate a base plate into the bottom. Then you could mount that baseplate to the third row mounting points instead of having to use the turnbuckles. Could just screw the baseplate to the metal the same way the top was. It would become pretty heavy that way though I guess. This is very interesting though and seems easy and approachable enough that even I could do it. I'll probably do something similar in my 80. I just shared the video with a buddy who has way more wood working tools than I do. We'll have to see about replicating this.

@Adv4x4 2 ай бұрын

Nice!! I actually didn’t mind the bracket I could have put it under the carpet as well! That’s a good idea for the aluminum angle though! Goodluck with your build thanks for watching!

@Phoeff99 7 ай бұрын

(And not calling you out but in case people need that hardware to bolt the slides to the drawers they are “1/2” long #8 machine screws” The “32” refers to the threads per inch and is only specified because some sizes can have both a coarse and fine thread option . “8/32” would just be 1/4” and these are certainly thinner than that. 😊 looks awesome man. Great work; very clean and professional.

@Adv4x4 7 ай бұрын

Thank you! I definitely missed that in my rambling while editing 😂

@KeqiangZhu 7 ай бұрын

cool!

@Adv4x4 7 ай бұрын

Thanks for watching!

@jcataclisma 7 ай бұрын

👍👍👍

@sisch1 7 ай бұрын

Awesome video and drawer system. I’ve been wanting to do something like this for my 80 series (94)I just bought. I’d love to see some build plans. I was looking at some already built systems and no one has anythingfor the 80 series. Although I could make them work with some modification I’d like to build one to its specific storage space. would you be willing to let us know about how mch time and money you have in it? I’m happy I found your channel you have a lot of good stuff for someone like me who needs to restore an 80 series Land Cruiser.

@Adv4x4 7 ай бұрын

Thanks man! I need to sit down and total it all up! Time wise is hard to judge as I worked on it as I could when I wasn’t at work. Appreciate you watching!!

@TheCajunGaijin 2 ай бұрын

There are quite a few drawer systems out there for the 80. Just depends on how complex you want it. It's sad some of the simpler ones aren't made anymore. But if you want one that the pricepoint/value seems to intersect at a good point then look up AirUpGearDown. Or perhaps SHW ultralite.

@brianabston1801 3 ай бұрын

This is awesome.. how did you get the 80/20 in shapr3d?

@TheKoreanMarksman 6 ай бұрын

Wondering what the length is for the 2 extrusions that connect the 3 sides together?

@Adv4x4 6 ай бұрын

Sorry about that! 19 1/4” each! Thanks for pointing it out.

@therawofrain 5 ай бұрын

Great build mate. What CAD app are you using??

@Adv4x4 5 ай бұрын

Shapr3D!

@viktordekeyser5727 2 ай бұрын

Hey man! cool build! What floor mats do you use in the rear of the 80?

@Adv4x4 2 ай бұрын

Thanks man! Weather tech!

@Phoeff99 7 ай бұрын

Haven’t been keeping up with your videos lately but is that shiny wedding ring, new? Was she your wife when you did the first camper?! Either way congrats!! 🎉🎉

@Adv4x4 7 ай бұрын

Thank you!! We got married in October of 2022! Have been together for 7 years in all though!

@Phoeff99 7 ай бұрын

Must have missed that detail before; don’t think I’ve been away that long! anyway, congrats.

@Jonboy4371 6 ай бұрын

What’s the software you’re using ? Also how did you implement the 80/20 into that software?

@Adv4x4 6 ай бұрын

Shapr3d on IPad! I had to physically draw the extrusion unfortunately

@brianabston1801 3 ай бұрын

Can you share the file?

@kjun80cruzer92 6 ай бұрын

What app are you using for 3D design? Really dig the build btw! I’d forgotten about the 80/20 and was about to build the whole thing of plywood lol

@Adv4x4 6 ай бұрын

Thanks man!! I’m using Shapr3d! I love 80/20 extrusion. It’s on the expensive side. But to me the rigidity of it is worth it. Not to mention your frame will be perfectly square for your drawers which helps a ton in the smoothness of their operation.

@kjun80cruzer92 6 ай бұрын

@@Adv4x4 yeah it’s great stuff, and the weight savings too!