I can get my cranck seals out with the stihl crank seal removal tool for chainsaws. I raced enduro/harescramble with a 2000 kx80 for a few years, have tried everything. The clutch arm you speak of, I've tried to extend, didn't help much, polish the sides of your clutch basket, good aftermarket ssprings and grease your cable and you got a silky smooth clutch, forget the cclutch armitage. As for power valves, they are all maintenance intensive, the early kx80 pv isn't bad, it's pretty small, I ran my bike on the lean side and spooge wasn't an issue, cclean the carbon maybe twwice a year that's it. I've only seen one that ccame apart and that one was abused. Anyway, their better than some but not the best.

Hey good video man, i like the idea of adding length to the clutch actuator

Great video

@baconator127 I would, but you have to take the engine out of the frame to clean it, and I have no reason to right now, but whenever it does need cleaning one day, I will make a vid of it!

You would put a smaller sprocket on the back for more top speed, or a larger sprocket on the front, but remember, 1 tooth change on the front sprocket is like a 3 tooth change on the back. Example: 1 tooth larger on the front is the same as 3 teeth smaller in the back. Hope this helps!

Could you make a video on how to clean the power valve?

thanks!

nice video

I'm 14 and I have a kx 100 I'm short and I ride it fine but fall on hills when I stop lol

OK tanx any ways

i got the bike running it was dat power vale it was really dirty and i chekd the plates to the grear box and every thin looks new and gaskets too and my cluch cabel was messd up so i got a new one and i got power now tanx any way broh

Yes..I just read them and made a video about the info I had read.

depends on how you ride..if your just starting or trail riding with some playn on tracks on the side i think it would be a great bike ..6ft 220 and been riding over 20 yrs...i love my kx 100..i have now and have had many bikes including kx 500 and everything in between and road the dogshit outa everything ive had.ltr bikes, rockets, cafe 2stk, choppers, quads, all kinds all powers.get a book and learn it and its a great bike.im not big on big jumpstho, id break out the cr 250 for that...

What handguards are those, I'm planning on getting some for mine but I have fly racing bars not stock

if i wanted to make my gears longer and faster and more powerful would i put more teeth on my sprocket or decrease

@tyler6469 Which years, 2005 - up really didnt have any problems

Alright cool. Do you happen to know what the range would be on one tank of gas?

the powervalves on these just have too many parts to them..that arent real strong. its actually a slide like a flat carb slid with a whale fin flapper on the the end...its works well in theory and when it works for low and mid range. but yeah they are prone to breaking. definatly keep them clean and inspect them often...i love mine for trail riding an im 220. im amazed it has the low and mid it does..not having a big topend keeps me from getn hurt..lol

My manual says the bike already has a PWK 28 (mm)

Yo broh u tink u can send me all the up grades form your kx on the carb settings I want to buy a full upgrade for my kx100 ....

Please answer I'm 5 ft 2 115 pounds and 12 what bike should I get I will spend up to 1300 dollars give or take. Thank you ASAP PLEASE

The flappers in there are flappen

hey I'm 16 and 6 ft tall im wondering if a 07 kx100 is a good decision for me?

@baconator127 Ive gone close to 30 miles on a tank, but wouldn't go over that

Call this nigga the rambler how he just slowly keeps going 😭

same bike

U should be able to 65cc master Omar

125 or250 I can fit and start my dads 250 it really isint that herdto do but I have a 100 im 5ft 8 and I can hold up a 250 no problem mybrother was 6ft 3 and he looked funky riding on the 100

You sound like your from backwoods Nebraska! Waaaahhoooooooooo

need help my bike iz lackn power

85ccmaster

need hlp pleas

other than the pipe and a twisted silencer I dont see anything you have actually done. Did you read about these things you are telling us? The clutch lever, the holes around the stator, the skid plate... Im not saying they wont help, I just dont see anything youve done to that tired KX

it gose intoo gear but its slow very slow help me broh

Whats the top

kx85 would be good

do u know any place online wer i can buy a kit to make it a 125??????????

Could you please tell me the length and width and height of this.because a am looking at 1998 one and I can't the dimensions for one anywhere.i need to know because I'm wondering if it would fit in the car

I'm having grounding problems can u help

Yes apoxy great idea!!! (sarcasm) lol

Speed?

4:06 voice crack

Code for carb kx 100 ( 1643 or 1617) ??

does the 2007 kx 85 have the same problems

my 100 raddles and makes a popping noise when I hit powerband and bogs in second idk what it is

mines also leaks

my bike is lackn power and lots kx100

Keihin is pronounced like "Kay-e-heen"

Did u say kawisuckey

UFO brand

kx 100 years 98-00same 00-02same 02-04same judged by manuals

Reed valve

this bike with its gearing would go no more than 60 topped out

Flappers

dont get it, your a bit to tall

Shorty see better. Derz