#86 Make Your Own DIY Silicone "Druzzy" Inserts For Your Resin!

Рет қаралды 10,822

Жыл бұрын

If you would like to purchase any of my demos please email me at sweetsnsprinkles7@gmail.com. I only charge cost plus shipping! You can find all my products on Poshmark as well under @michellecegledi
To view a lot of my products click here: • #85 A Year In Resin Al...
Would you like a tour of my new resin room with poured resin counters? Click here: • #5 Full Tour Of My Res...
Click here for an easy quick way to clean your wet resin containers: • #13 How To Clean Your ...
Amazon Wish List: www.amazon.com/hz/wishlist/ls...
Buy Me A Coffee Here! Thank you so much ! bmc.link/glitznglitr
___________________________________________________________________________________________
Resin: amzn.to/3AuZr9a
Liquid Silicone: amzn.to/44HzHEs
Mold: amzn.to/3NR3VyS
Alcohol Ink: amzn.to/42fj0i5
Crushed Mirror Pieces : amzn.to/3M2KOjT
___________________________________________________________________________________________
Let's Resin Affiliate Links:
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Let's Resin 20oz fast cure resin: amzn.to/44U9hOZ
Let's Resin 720z fast cure is amzn.to/3QCH3EH
Let's Resin 1gallon epoxy resin: amzn.to/3DJNRsd
Let's Resin 1 gallon table top resin: amzn.to/3Qxmidz
Let's Resin Polyurethane resin: amzn.to/3Q0qC4E
Let's Resin white alcohol ink (C deeper): amzn.to/3O4ZI8W
Let's Resin 450ml silicone cup: amzn.to/43SZOXv
Let's Resin 26 colors ink set: amzn.to/3q2vmMn
Let's Resin resin tape: amzn.to/47qgisU
Let's Resin collector mat: amzn.to/47tUkWa
________________________________________________________________________
Resiners Resin Dryer for Cup Turner --
resiners.com/collections/resi...
Amazon link For Resiners Products:
the AirLess bubble removal machine --www.amazon.com/Resiners-Remov...
Resiners Resin Dryer for Cup Turner -- www.amazon.com/Resiners-Machi...
_____________________________________________________________________
Misc. Items
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Tumbler Turner: amzn.to/436Lrye
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Mica Spoon: KN10425
Cricut: amzn.to/3Qh1LcM
Happy Mail:
8730 Mystic Circle
North Port, FL 34287

Пікірлер: 55

@KarenYauney 2 ай бұрын

That cross looks wonderful!!

@laviniacontraro4705 24 күн бұрын

A new learner with resin and silicone, I made my first mold in my silicone mold and no difficulty getting it out.

@cordeliagriffith5925 3 күн бұрын

Awesome!! Thank you sooo much for this Wonderful, helpful tutorial ❤😊

@glitznglitterbymichelle1 3 күн бұрын

You are so welcome!🤗

@chanalowenthal3897 Жыл бұрын

Thanks for sharing your ideas. Try spraying the glass/resin round with mold release. That should help the silicone come off it easier. I’m definitely going to try this.

@julieashton8877 6 ай бұрын

Thank you, Michelle! Pretty cool!

@wondergranny2299 Жыл бұрын

The shell cross is fabulous!

@lorishaw8116 Жыл бұрын

That was awesome! I can't wait to try this myself! Thank you so much

@glitznglitterbymichelle1 Жыл бұрын

Your welcome 🤗 thanks for watching 😊

@pengyou26 Жыл бұрын

I’ve always wanted to learn how to create druzies! I can’t wait to try this out! Thank you! Thank you! Thank you!

@glitznglitterbymichelle1 Жыл бұрын

Your welcome!!🤗

@DarleneD1026 Жыл бұрын

Thank you!! Good job

@janieness5158 Жыл бұрын

Very interesting tutorial!

@milolaclover Жыл бұрын

What a fantastic tutorial thank you! ducks were so stinkin adorable

@glitznglitterbymichelle1 Жыл бұрын

Thank you! I hope you try it! I love spring with all the different babies around here 🥰

@marionciociano9845 Жыл бұрын

You are so smart. It worked I made a druzy with a old silicone mold n it's beautiful thank you

@glitznglitterbymichelle1 Жыл бұрын

That’s awesome!

@marshaschenkel6438 Жыл бұрын

This is a great tutorial. Thank you so much

@glitznglitterbymichelle1 Жыл бұрын

Your welcome 🤗

@patriciaburt9365 Жыл бұрын

That is a beautiful cross

@Orca2019 Жыл бұрын

That is pretty interesting Michelle.And yes your experiment is doing what you want it to do. I look forward to more tutorials

@glitznglitterbymichelle1 Жыл бұрын

Thank you so much! ☺️

@Vsv1224 Жыл бұрын

Thank you! I enjoyed your tutorial. I may give it a try. Your cross is beautiful.

@glitznglitterbymichelle1 Жыл бұрын

Thanks! Definitely try it! Thanks for watching 😊

@passerineblue 6 ай бұрын

Thanks, Michelle. I will definitely try this. I also want to make a mold of crystals in drusy. Wish I could tolerate the heat, but I can't due to COPD. I would love your lifestyle. Many friends have moved to FL.

@glitznglitterbymichelle1 6 ай бұрын

Well unless we have to go outside we are always in the AC. We do love it down here though!

@tjsims8891 Жыл бұрын

Ohhhh... Do you live in the Cape Coral area?? I was living there during the hurricane... but moved to Lehigh Acres back in March!! Never want to go through that again! Glad to see you're getting repairs done!

@glitznglitterbymichelle1 Жыл бұрын

We are in North Port in the eye wall for like 12 hours ☹️ had about $240,000 In damage.

@pkotesky Жыл бұрын

Hi Michelle, I love your videos and experiments; this time I’m wondering if you could do a druzzy edge coaster, for some people is so easy but I cant do it😖 I prefer male my own coasters and trays, because I cant spend lot of money to purchase.. so I hope you can do a demostration for that druzzy edge please??!thank you so much! Hug for you🌷✨💐🙏🥰👏👏👏👏👏

@glitznglitterbymichelle1 Жыл бұрын

I wish I knew how to make that as a mold. I’ll do some research and if I figure it out I’ll definitely share to help save people money! Thanks for watching 😊

@pkotesky Жыл бұрын

@@glitznglitterbymichelle1 Thank you so much for your replied😘💐👏🌷✨🙏

@LisaBale62 8 ай бұрын

🥰

@jillybird4324 Жыл бұрын

Can you put a dusting of cornstarch in it as well?

@glitznglitterbymichelle1 Жыл бұрын

I’m not sure this was my first time making them. I do know the surface you want to mild has to be shiny. Maybe a mold release would work.

@taraharris5916 Жыл бұрын

Wait did you mix part B to part A before adding the broken glass?

@glitznglitterbymichelle1 Жыл бұрын

I don’t pay attention to which part I pour first to be honest. I do however pay close attention to my lines so I have the exact amount of each. In doing this step looking at eye level my resin cure’s perfect every time.

@pamcolechadwell1302 Жыл бұрын

I'm so sorry all that bad damage happened to y'all, I love the little animals. I've been making mine from Borax crystals I grew. I was going to try it the way you made your's but I just love growing them from Borax. Next time use a clear spray sealer and they will come right off for you.

@glitznglitterbymichelle1 Жыл бұрын

I’ve never heard of the borax way! Sounds super interesting! Do you do tutorials!?

@pamcolechadwell1302 Жыл бұрын

@@glitznglitterbymichelle1 Sorry I never seen this comment. No but If you wanna chat on your last video we can.

@pamcolechadwell1302 Жыл бұрын

When I get my supplies, I'm going to make molds like Julie make, wish me luck.

@glitznglitterbymichelle1 Жыл бұрын

I wish I knew how she made them! I can’t find a tutorial on that anywhere. People are holding that info hostage 🤣 not everyone can afford to pay that much for molds. I do have one of hers and it’s really nice but for the $75 I only used it twice 😑

@pcpcnow 8 ай бұрын

What do you use for clear coat? Thanks

@glitznglitterbymichelle1 8 ай бұрын

My normal resin, nothing special.

@chrissmith6862 Жыл бұрын

You must be a fan of Julie Cutts too.

@glitznglitterbymichelle1 Жыл бұрын

I am! I’ve learned a lot from her as well 😁

@tjsims8891 Жыл бұрын

I just ran across your video.... What is druzies and what is it used for?? Anyone??

@glitznglitterbymichelle1 Жыл бұрын

Sure! You will put this little insert into a project and when the resin cures and you pull the insert out it gives a crystal affect in the piece. Fast forward to the end of this video where I use it to show you exactly what it does. Thank you so much for watching and I’m happy to answer anything I can! 😊