Parts list are in the description of the video 👍 Thanks for Watching Please Like & Subscribe to more great videos! tinyurl.com/lmojpn

After seeing this video, I went ahead and purchased this very brace for my 2015 Toyota Corolla S. Here is my take and recommendations for the FYI. First of all, do this yourself, you do NOT need a mechanic. Secondly, if you are decently strong you won't need two wrenches to create leverage, just a simple 14mm wrench will do for both removing and re-tightening the bolts. Next, you'll also need a 5/16 Allen wrench to tighten the top brace once everything is in place, you tighten by using BOTH the closed end 14mm and the Allen wrench together. Also, get yourself some 'blue' locktite -- this stuff comes in a small tube and I highly encourage you to apply a little bit to the lock-nut side of the 14mm side of the top bar, doing so will make sure that when you tighten up the bar it will stay tight. Here is the scoop when I installed mine. Just lift slghtly up on the plastic cover as to not break it then reach in with the closed end of the 14mm wrench and tug -- do this on both sides of the job, just to make sure you can get both sides completely off. Then, I recommend removing the bar from the horseshoes, it makes the horseshoe install a lot easier. Then put the bar on one side, slide the bolt through and fasten the lock nut and nut and apply some loctite to the nut-side and tighten using both the 5/16 and the closed end 14mm wrench. Done. I would keep those tool in your car, because after one day you may have to go back and re-tighten the top bar again -- I did, because at first I didn't use loctite. Job done. It does look good and does indeed tighten up the car's front end. Look at it as a knee brace for your car, it uses it when it needs to, otherwise it's just there to hold both sides of your front end together. You will notice it a LOT more if you get a spring lowering kit for your ride -- all the suspension works in harmony in a fantastic way. You'll be able to rip through corners your car only dreamed about before you did the suspension mod. Good luck!

Just installed mine. Love it!

Watching this all the way from philippines

Now you should get the Sway Bar. I'm buying the Megan racing strut bar and the TRD sway bar hopefully by next week.

I was goin going to buy this originally but I decided to splurge with the TRD bar. I am glad I did.

I just install mines thanks for the help

That top bar also helps your frame maintain its rigidity. Example: You pull out on to a road from an uneven drive. There your car's chassis is at a parallel angle, this bar then assists the frame in maintaining its' "flat-stance", so it does not flex out of shape over time. So you see, you didn't waste your time my friend. Not to mention the minimization of roll around fast long corners.

First video of 2019! Nice 😎

You should do a video on the Megan Racing rear sway bar!

Awesome advice and video my friend!! Gracias!! Saludos de Texas!!😁🤙🏻

I love you videos on your Corolla because I have one to!

People who dislike don’t get the whole point of being in car scene we love cars period no matter what as long as you make your car your own

Don’t forget to wrap it

Thanks for the video! I have to ask, why did you change only one of the pedal-shifters behind the steering wheel?

Gran video Saludos 😁😁

Did you buy the colored engine cover or paint it?

You should buy a lighted Toyota emblem I bought one for my 2018 camry!🙂

So amazing

Looks good!! You could of wrapped it to make it match in the engine bay or match the outer wrap! Awesome install video non the less!!

Do you have a rear sway bar ?

Ohh 🔥 You Gave An Idea ❤️

Wow se ve muy bien me gusta y estoy poco a poco preparando mi Toyota Corolla S 16

Thanks for posting how to instal

Does it get in the way when u do an oil change or spark plugs?

Muy buen video

Should buy a socket set they are cheap ... hope you got one now 🤣🤘

If I can't find the stock strut bar than I'm going to buy this for my 93 Toyota Corolla

Is this one better than the TRD strut bar? Thanks! ❄️👍

By the way that strut bar looks very cool!🙂 I wonder if they make it for the camrys?🤔

Can you please tell me if you have a coil-over kit on your Toyota? I'm considering a set, but I'm not sure of a brand, perhaps you could provide some input. Thanks, man!

Nice!

Will the 2014 Corolla's sway bar fit on the 17-19?

I think if you did more aggressive turning on right corners, making u turns, getting on a freeway loop you would notice it more.

Nice

Intake soon?🤔

Does it handle better after install?

Some day he will buy TRD parts

Will this fit a 2018 Corolla?

will this fit a 19 corolla?

Corolla S 2014

If it works or not, who cares it looks great! These cars are not fast enough for it to really matter that much anyway! So looks is good enough.

Do you thing it possible to put a train horn on them

Carrazo

Good luck changing the engine air filter

¿Realmente funciona?

👍🏼🤙🏼💯👋🏼

I hope you can notice me

I thought it would be hard to install, i was wrong.

low n slow

Shine graffix ULTRARACING is a lot better than this one

Now I'm realizing you just putting stuff on your car that don't make sense. Why you need a strut bar ? Do you know what that is for ? Looks ?

First

Those leaves around the engine bay 👎👎👎

Saw this on my feed not trying to hate but all the stuff your installing is unnecessary. This car would be clean if you swap the engine and make it manual and swap in a 2jz engine and actually build the engine! Thats a real car enthusiast just my opinion