Finally a review on the C2X were the reviewer isn’t falling over themselves to tout a ho hum release by RC4WD.

Awesome honest review! Yes please do a modification video of what you would do to make it C2 worthy.

your intros are gold!!! informative and educational video as always.

Thanks for instructive video. As someone who has gotten into RC 3 months ago I learn a lot from you. 👍

Your intros are so KEY . I love them.

Thanks for the informative and very honest review, good to see it driving👍🏽 It would be really cool to see you do a little build series on this truck.

The more I see the C2X the more I like it. I think with a few mods this could be a good truck to own. Looking forward to seeing future mod videos with this truck. Thanks for the review!

Much appreciation for your honest impressions, and a great review! (apologies, lengthy post below...) I've been watching all of the C2X videos as they come out because, out of all the 2019 holiday R/C releases, this one has the strongest hold over me. I own an assortment of crawlers, from nearly stock to heavily upgraded. However, I've never owned a hardbody and really like the idea of working within the limitations they have on ultimate crawling performance, but getting extra satisfaction out of having something with a more scale-accurate appearance. I have some very "scale" terrain in my area, where my 1/10th crawlers look as if they are navigating 1:1 obstacles, and the C2X would be a perfect addition to my garage. Sure, it could use a couple minor changes, but I have all the parts I'd swap (wheels, tires, battery connector, LiPo packs) except the bumper(!) I've checked out other RC4WD vehicles before, and the cast metal axle housings and leaf springs combined with the lack of fender clearance to run a larger tire were just too many negatives for me. It's got to be able to at least make it up the places that I go to, after all. There's a limit to how challenging I want it to be, don't want it to be like taking a stock 4x4 work truck on little A/T tires hill-climbing and rock crawling... disastrous! BTW - the perfect low-cost RC4WD bumper replacement option can be seen on this RCCrawler.com member's Marlin - www.rccrawler.com/forum/attachments/rc4wd-trail-finder-2/383661d1568729584-img_20190913_220949.jpg - and the bumper is Delrin, like the bed and skid of the C2X - makes it inexpensive - link here: store.rc4wd.com/Tough-Armor-Comp-Series-Flush-Mount-Bumper-for-TF2_p_6937.html

Awesome video man. Always like your honesty. Makes it is before you make a big purchase like this one. Still is a good looking truck. Thanks again.

Awesome and honest review, I like it.

Cant wait to pre order mine great job as usual

It’s a great starting point Matt. I would put weight on the wheels, brass knuckles, overdrive the front, move rear shock towers forward, dual stage foams, clock the motor as you mentioned and maybe lower overall ride height. With these mods I absolutely would Comp with it and probably kick some butt. 😂

Love your reviews. Don’t know anything about classes but I would to see what you’d do to it. Love to see a kit for this truck. Thanks for the video!

Thanks for actually driving it. Looks good on the trail. Theres no comps around here or hobby shops. Its lonely here. 1 is the loneliest number.

Great video as always. I’ve learned and saved a lot of $ from your videos. Keep ‘er goin!

That was a great overview! I think your thoughts nailed it!!👍💯%

I would love to see you do a c2 comp build! I think the first things I would do are the motor clock and probably sliders and scale it out

I really like the look of this rig.

I just ordered one! Had a bunch of gift cards for my local hobby shop, so i only paid 360$ for the c2x! I like the look of it, wanted to try a new chassis, and a hard body! Cant wait till its here!

Always enjoy your videos brother, 🤙🙏

A video series on setting up a truck for Class 2 SORCCA events would be awesome, many clubs are running SORCCA based rules but maxing out the scale points at 30pts, this seems to be very common and does effect how much "scaling" gets done over performance issues. Looking at a many pure SORCCA based Class 2 hard body, scaled trail rigs does not match what you see at many Class 2 SORCCA (based) events as they feature heavily cut lexan bodies, no drivers, almost no accessories and the rigs are really stripped down for low weight/low center of gravity performance.

I definitely would do a lot to make it class 2 ready. Lexan body, new wheels tires foam, upgraded steering servo, and would do something different with the bed. All in all I wish they made a Lexan body kit version

I kinda want this truck. Your video has helped me with making a decision. Its somewhere on the list haha

In areas of Canada with slightly higher taxes, this thing is going to be around 750 CAD. Doesn't look too bad over all, but the rear bed thing annoys me for some reason lol. Great review!

Good honest review! Although im not really sold on this truck. I had a horrible experience with Rc4wd when i bought my tf2 years ago. I run a vaterra ascender in class 2 comps in ontario and it does really well considering it doesnt have alot into it. Keep up the good work on the videos!

That rear tyre swirl had me mesmerized, psychedelic man!!! Yeah the front bumper is kinda weird but seeing as they cut the body right up to the grill for more clearance it wouldn't make sense to have it in a regular position so I get why its so high. a Marlin bumper might be a better option ! but as it is theres a ton of clearance. On the whole I like it, its got lots of potential. and being halfway through 3D printing an interior for the FJ60 seeing an included interior always gets a thumbs up from me lol

I really like the idea of this truck. Will have to pick one up to make videos of on my channel.

Beautiful video)

Yes do a series on this truck would love to see what you can do with it, I’m a little intrigued by this one kinda cool .... it’s got a lot of potential The front bumper has me a little like 🤮🤯

I would love to see a series on making it more competitive. I would like to know what goes into those kinds of rigs.

Bumpers !!!!😣 The EnDuro SenDero. I just thought it was ugly!! Lol .. KILLER video.. 🖒🖒 NC ❤back yard RC.AND MORE.. 🏞

Whoa that rear tire. Nice review!

I like the detailed body and interior. I would change the front bumper, add sliders (as you said), change wheels and tires and add a roll bar to the delrin bed...for starting mods.

That would be a great series, showing how to prepare for a SORRCA event.

Nice truck

That rear tire mod looks WAY good, might have to do that to mine as well.

An unusual way to go as you said most people start with a box of part's that are good for a comp vehicle then stamp their own signature in the build, with a smattering of rtr parts that on their own are not comp worthy but once masarged into a truck or buggy work, but not a whole vehicle so yess I think it would e an interesting build to see what else it needs to be competetive by disgarding some part's and adding your own, so I say run a build on here to see what it takes, but first run it as it is before the build about what most of us would do first.

I’d love to watch this truck be modified to see what you can do with it! 👍😁👍 good video !!

Show me the styrene build behind you. I also like the C2X as well. Oooh get Josh to make you bed rolls!

Nice truck, those MTZ tires are actually really good! That "outcry esc" appears to be yet another rebrand of the Hobbywing 1060 which is a solid esc but a simple 1080 is so much better, I'm glad the servo isn't on the passenger side like the other models, I did a video a while back on a Marlin TF2 with the motor on the passenger side and steering servo on driverside that worked out well. Its searchable on my channel if you want to see the work I did to make it work.

Nice Video cool car ❤👍🏻

First here, 5 o’clock in the morning here on the west coast!

Hey from Australia🇦🇺👍.Depending on rules.. Maybe some bigger diamitor wheels,change shock position to lower cog,longer travel shocks maybe weighted front end underdrive/overdrive as well, sliders,def lift and push front bumper in closer to body or cut and modify. Not exactly sure as what else you could do as I'm new to crawling but have a pretty good under standing of them due to watching a lot of vids like this.👍ps. maybe rear portal conversion would also help.🤷‍♂️😁

The drive shaft all kits have it

C2X looks like a good option for the next Budget Build series.

Glad to know I am not the only one that thinks this model is recycled parts from other rc4wd models.. not sure if a proline cage is class 2 stuff but, I think it would look better than the delrin bed they have on it.

Great review brotha! I was gonna buy one but after this. I gotta say I'm not too thrilled. I'll wait and buy it used, cuz I dont believe the hype lol. Thank you for sticking to real rc rigs and crawling. These other rc youtubers are taking a paycheck thru "WL TOYS" and trying to sell off these dollar store crawlers and rock racers lolol

I am extremely interested in this platform and am very excited to see what mods you do to this especially since I have a Beast II 6x6 and have been considering clocking the motor mount in the R3 2-speed it has.

I would probably just try lowering the cog first and see how it works out. then maybe some weights (minimalist) and an outrunner setup like holmes revolver. low and smooth equals getting the W

Personally I would attempt the hard body at first. Remove the standard t case skid and replace with a flat skid Run a full droop set up 30w front 60w rear. You can run the rear with what could be called a semi droop by adding more fluid to keep more pressure under the piston helping keep more weight to the front slowing the drop moving over obstacles. The links can be made to have more up and down travel just by switching to a bent rod end. Which would further lower center of gravity. Front bumper has to go run a shorty rather than that. Rear foams seem like they need a stiffer foam and tuners and just tuners for the front. That’s how I’d start and it’s already planned following my current build.

I see the comp build is under way........THANKS !!

Great overview, love the Class specific insight. The running footage was fantastic too! #twistedtireclub

Id run 50% droop with beeftube ar44s, clocked motor, brushless set up, turn the t case to overdrive the front with the hot racing overdrive in the axle and id fine tune it from there.

I'm gonna take mine to a competition and compete as is to see what it will do

Please do the 'prepping for C2' build series. I'm new to the crawler scene and have no idea what makes a good C2 truck. I went to ECSC this year, and despite asking the guys tons of questions I still don't know enough to have a handle on what's good and what sucks. I would love to see a full series from choosing the truck to building/testing and then going to a comp.

Swap out the electronics, XVD axles, O/U drive gears, Metal Drive Shafts. Maybe tires, IROCs or Pitbulls.

I would consider making the rear of the chassis rails longer to except a full scale truck bed Altho it would make the rig a little longer adding a truck bed with the side panels to match the 4 door body I think it would look better than that truggy? style bed.and clock the motor defenetly would help in the performance in my opinion.But that's just my thinking.I most definitely would love off those ends that block the headlights and and a winch between the front frame rails to help with the lower CG.Again that's just my way of trying to make a better RTR.I guess in short to each their own.Thanks for sharing.One other thing tho why not have a frint center pumken off to the side under the drivers side or something off center just for that more authentic look of a scale rig.Just a thought.

4:30 pointing out on just tire ripple alone. sweet.

I really enjoyed this review my friend. I would put a driver in first because that's the way I roll 😀👍👍

Excellent review friend.

Nice out of the box rig!! Definitely needs some sliders. I think i would extend the bed a little and add roll bars. Red black and white paint..;) ;)!!. Should have came with a winch..so need that. And watching video something seems wrong with the tire compand ...so new tires also!! Anyways another great one Matt.

at first i thought no on the rear bed but add a rear cage and i think it'll look awesome, i quite like this truck , mabe a 2 dr would be even beter tho

please do a build up video series i'd love to see what you would do to this rig

Trailfinder 2 kit is best ever

the first thing is to lower the center of gravity as much as possible, if it was me. I would clock the motor down and get one of the new lighter outrunners that are available from a one of the manufacturers that have them available paired with a micro sidewinder because they are super light. next is to get rid of the electronics plate, followed by home made metal sliders out of something light, like .019" aluminum. mounted to the chassis at the skid bolts and bending up and around the edge of the body stopping short of the body mounting holes, kind of like boat side style. it will be easy enough to work the .019" with but still strong enough to do the job and after some abuse will dent slightly for a more scale look. and now that you have your new aluminum sliders they are a great place to mount your electronics, and battery to keep them low. then i would weight the interior. I have a sneaking suspicion that its not very light and I would probably build a home made 4 seater interior out of the same .019" aluminum i used for the sliders and it would end up being lighter and would receive an extra -2 scale points for custom interior. Outboard the bottom of the shocks as much as possible, and then test and tune and adjust upper links for roll center and anti squat as needed and try not to have to add any weight to the front if possible. sorry for the long winded response. lol

As a class 2 comp RTR.It would have been nice if the front center pumpkin was offset instead of being in the center like the rear pumpkin.But that's just my opinion.But it looks like a capable rtr.And room to make it even better with some mods.

nice truck but not comp ready but if would be a fun build and a great start for sure.

WOULD ABSOLUTELY LOVE you to do mod videos on this guy, I’m a noob to rc trucks and I am seriously inquiring one of these guys

I like it I think it'll be a pretty good considering it actually looks like it's almost the proper scale compared to its you know Chevy and Ford and Dodge counterpart scale trucks

I'd definitely get rid of the front bumper and mirrors first if it was going in to a C2 comp. Mirrors won't last on the rocks and the bumper sticks out too far.

I really like the look of that thing. Love the Body so would it be still be a good base to start a build in this style when you like the look of it or should (or can) I get the body seperatly and should start with a different chassis overall?

Damn, fell in love in the first 5 seconds. Gmade bom or this? Man, hard decision.

Nice honest review.... great work. I have a bout a 1/2 hr long video I did on my channel on the motor clocking on the original TF2 for those interested

First thing I’d do if I got that rig was get rid of that TF2 style bumper. Obviously it slightly impedes approach angle, but the fact that it covers half the headlights just grinds my gears. RC4WD put a good rear bumper on it, why not put the same type of bumper on front? Oh well, guess that’s where custom work comes in. Other than that, that rig looks really cool.

Where can I get one of those Jeep body’s you have back there painted silver?

Question sir, let’s say someone bought this truck and wants to swap to VP rock jocks or F9 how and what would I need to do so??? Much appreciated!

The front end needs to be narrowed with a small metal bumper. Any class 2 rig is going to need a servo winch and it looks like there is no room for one on this truck. I like that it's right hand drive, needs a driver. Looking forward to see what you do to it!

OK, so if I'm bored and want something to take on a hiking trail as opposed to competing with is it a good option? I'd honestly prefer the cheapest thing that would handle some off road

Wouls love to see a kyosho outlaw rampage made to look scale

Hey brother, love your videos, gonna go like them all after this. Let me ask pls: If it were your first crawler, would you get this or the TRX Defender? I love the look of both of them Much appreciation

Needs sliders for sure, and 3s and a BEC.

I’d like to see what you do with this truck. I like RC4WD, but not really excited about this release. Thanks for the honest review.

You could be a news anchor:)

hey man I bought one last month and the front center suspension link wasn't attached to the axle , a broken bolt with no threaded end and no nut ? Do you know what size would work ? Or where I can order one ?? Reached out to RC4WD within the first days got a run around and they messaged me days ago saying they shipped the replacement part ,tracking number hasn't been registered and I'm over the wait .... I didn't think spending 600+ on this RTR I'd have to wait a month and a half to try it

I think its a good idea to do a video build of this truck n build it into a comp capable truck. Itd be very inspiring to others, including myself, n give good direction on how-to. Why not do a budget comp build? Low cost, but comp capable rig?

I like this rig - but what I´m a bit concerned are two things: 1st) The mounting of the body with normal screws - thats way to laborious for a battery change! And on a long term maybe a bit stressy for the hardbody! 2nd) The gearboxes open gears. They are right in the position of flying dirt and little stones of the front wheels! So you would have constantly dirt in your gears!

How do you feel about the center pumpkin on the front axle? Would it give you more points if it were offset?

Sweet truck. I have gotten into 1/24 crawlers and got bit pretty hard. I have 2 now one being an axial Bronco that does pretty decent. What I have learned is that even these little guys get expensive, especially in Canada. With a moderately modded bronco and 4WS bead bolt and parts, I’m prob into it for close to $1000 (got a bit of wheel and tire thing…). I would be afraid of how quickly this scale adds up. With that being said, I would love to see a build series on this. I love the scale hardbody look and this is one I could see myself getting. One of the many things I learned in the smaller scale is tires are prob the easiest change you can make to net the most results, how are the tires on this cause I would assume the suck like all stock tires.

first, i would sell the body and get the 2dr hilux instead and get a bed for it. change the bumper, tires and foams and install OD/UD.

I would love to see a video or video's on taking this truck to the next level. Based on looks and scale factor I love the idea of owning an rc4wd truck but after purchasing the Marlin and dropping another $500 in upgrades and time spent the return on investment just wasn't worth it.

I've been doing the motor-drop conversion for years. My thing is...will the motor hit the pan-hard bar?....or that big diff?

Forgive my ignorance, but what do you mean by clock the motor? 🤔

Is the chassis long enough to put a standard bed on it, I like most of the the truck but would love mount a standard rc4wd bed on it

I'm looking to buy a crawler/trail truck and I'm really liking this one or an element trail runner. Which one would you prefer?

Awesome video. But will a proline roll cage fit on it ?

I notice the rear tires distort or the all of the tires for that matter distort and they seem to not really go back to their memory very good

I’m torn between this truck or the Marlin . Every truck I own is a Rc4wd ( I have a regular tf2 and the Desert Runner ) and I’ve always had nothing but good luck with them . I know they are two entirely different types of trucks , springs vs leafs etc etc . I don’t comp or anything like that mainly just trail stuff should I stick with the Marlin or give this one a shot ?

Wondering if they make portal axles for this.If so should they be put on

Do you think it will be possible to bolt Vanquish Axles for an SCX10.2 without any modifications?

I have one of these. I'm not into looks. Here's my question. I took it crawling. It's like taking a 2x4 crawling. It's stiff. I think it's the hard body. Could you switch it over? It could you use this chassis for a lcg or lower it?