The problem with the Spektrum Firma 2-1
Рет қаралды 32,648
Күн бұрынI review the new line of Spektrum Firma 2-1 ESC/Motor Combo units. They come in two different KV values, 1400 and 2300kv and have a lot of nice features, with a few drawbacks, watch to find out more.
Want one for yourself? bit.ly/3wRRckQ
More info on the Novamos Ring Light: www.novamos.com/
Our merch is super cool: teespring.com/...
#spektrumrc
#teamevga
#ilearnedsomethingtoday
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Summer 2020 Stickers are sold out: scalebuildersg...!
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuilde...
► Merch available here:
teespring.com/...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
MB01GULPPTIEUWL
@nielsjuhr594 2 жыл бұрын
Not commenting on the video, just wanted to swing through and say how much I appreciate all that you do for the rc community. Your passion and commitment is amazing and I sincerely appreciate it.
@scalebuildersguild 2 жыл бұрын
That is so kind of you! I appreciate the feedback and it makes me want to do even more! Thank you for watching!
@robbinthehood94 2 жыл бұрын
@@scalebuildersguild Yea bro your commitment is evident and we all reap hella benefits just from watching you share what you love
@ryano8613 2 жыл бұрын
Ditto.....!
@JoeOvercoat 2 жыл бұрын
@@scalebuildersguild a little bit smarter every….well, you know. ;)
@troo1977 2 жыл бұрын
Thanks Matt. Your ability to school us and entertain us at the same time is greatly appreciated.
@dt4807 2 жыл бұрын
New to this channel, just want to express how much I appreciate an honest review that is not pushing the product or starts with “Worlds best….”
@JoeOvercoat 2 жыл бұрын
Sensationalism not found here…and it’s awesome.
@jaylite2826 2 жыл бұрын
I put the 2300kv version in my scx10 iii build and am very happy with it, and was not happy about adding another programing card to the tool box though. I have a little pile of the ones that come with the 1080 forming on my workbench.
@sebbbou5455 Жыл бұрын
I just choose to go that route with my SCX10 iii !
@jaylite2826 Жыл бұрын
@@sebbbou5455 Nice, it it's been great. i recently grabbed the new hobbywing fusion pro for a different build pretty much the same but uses the old hobbywing programmer that comes with 1080s. Also not included, but they give you a nice decal to slap over a old programming cards if you have one.
@LargeeeScaleLife 2 жыл бұрын
I love the idea but I’m still going to go with the fusion one of the biggest reasons they give you the program card at this point I have back ups on my back ups of those and they’re great to have
@thesillypig785 2 жыл бұрын
I was looking at these motor/esc combo's but went for the hobbywing xerun 540L R2 for the simple fact that all programming is done on a smartphone, and you can do it while running the car. Best feature ever on a ESC.
@bucksrcworld8119 2 жыл бұрын
"0r FoooooooooC" had me dying, awesome video Matt!!
@JvD1985 Жыл бұрын
The Spektrum 2300kv only has 40amps esc in it and the hobbywing 2300kv has a 60amp esc in it.. so the HW is the way to go 😊
@SouthsideRC 2 жыл бұрын
Aaaaahhhh! I was gonna say that buying the Combo and programming card separately is kind of a deal breaker. But, having a shorter can may make me get it anyway. Great follow up video!
@Andy_Yates 2 жыл бұрын
Thanks, I've been curious about these. You definitely read my mind in the future by acknowledging the question about this fitting in a VS4-10 Phoenix. I bought a Castle Slate / Mamba X combo but that Spektrum would be such a clean install if it fits
@jameshankssr466 Жыл бұрын
The hobbywing fusion se 2in1 fits the phoenix they have 1200 for $69 and 1800 kv for $79
@stevemiller7980 2 жыл бұрын
Thank you for the review, I've been thinking about this setup. Thanks for telling us the good and bad.
@scalebuildersguild 2 жыл бұрын
Thanks for watching!
@rcnutball4087 2 жыл бұрын
Thanks for making the video. I was looking to get the 2300 2in1 but I could not find any videos on it 👍🏽👍🏽👍🏽👍🏽
@mutstumbo 2 жыл бұрын
Thanks for sharing another great upload. That ring light sure would make the background pop if it was around the water valve. haha
@masonwaller3980 2 жыл бұрын
Bought the 2300kv combo on 10/19/21 and starting today when reverse throttle is applied it stutters/jerks. Emailed spektrum with pics and receipts and a replacement will be shipped when back in stock.... website says February 2022😑😑😑😑 besides the all of a sudden stutter in reverse its worked flawlessly.
@mattshobbies Жыл бұрын
Just got one of these, and in the Phoenix VS410 Portal I needed the card to change the direction. Must be the VFDtwin, but I had my transmitter in 'reverse throttle' to go forward until I got the card. I also like the Hobbywing 2in1 better. Just overall it's more configurable (Have that in my capra), and I prefer it over the Spektrum.
@THATHATSALLFOLKS 2 жыл бұрын
Bought 2 1400kv. I had the v2 programmer but it still needed an update. Updates with windows only..so if you don’t used windows you are screwed
@racerj2.03 2 жыл бұрын
I think that Team Orion was the first to offer this type of system several years ago. The second brand to offer this system was Dynamite a year or so later. Kyosho at one point offered a similar system in some of,their models.
@brc537 10 ай бұрын
You are correct sir.
@lypheEddie 2 жыл бұрын
I was super on the fence about one of these or the hobbywing. Thank you for the review, chief
@Jrod_FPV 2 жыл бұрын
I've noticed the same thing with downhill driving, momentum/ scale speed stability could be better out of the box for those that are super into scale driving . This is really caused by the drivetrain as the motor is doing it's job perfectly and holding an exact constant speed. This effect is reduced with single speed transmissions. And Exacerbated by 2 speed transmissions. If this bothers you like it did me, you may want to set your " throttle matching" to low. Default is medium or high. Low is plenty enough throttle matching to be 100 times better than brushed. What I like about not buying your own card gives some a reason to get out and meet someone new when you ask for help. I met a real nice guy and was able to help him out with his truck. The best part of RC is making new friends! Sure you may have to reverse throttle in your radio and your truck might drive slow until you change the setting in the ESC, but at the end of the day you might make a friend out of it!
@RJcrawl 6 ай бұрын
Thanks a bunch 👍 Just got one for the base camp kit. Cards ordered now. Pinion gears still on the don’t know what I’m doing plans. But I’m guessing 13t?
@scalebuildersguild 6 ай бұрын
That should be fine. Have fun!
@SteveSherar 16 күн бұрын
No , the motor is out of the truck in my hand. If I run it slow constant it stays fairly cool, then with it all out the temp rises very quickly, I stop it at 118, 120. The thing is it keep climbing in temperature.
@scalebuildersguild 16 күн бұрын
120 isn’t terribly hot, provided you’re talking about Fahrenheit. If it gets to 150 or 160, then I’d be worried.
@dimo2224 2 жыл бұрын
Great video. Always enjoy them. Just so you know. Put one in my phoenix and it fit without any modifications. Just took a min. Thanks for all you do for the hobby. .
@scalebuildersguild 2 жыл бұрын
Thanks for the info!
@auggysimcity 2 жыл бұрын
Did you have to modify the 2,300 at all to fit in the vanquish? Additionally does the program card need firmware updates. Thanks much!
@m.m.aautos6608 Ай бұрын
Wouldn't you want consistency when it comes to downhills. It keeping its throttle position without accelerating with the decline and that's an incredible feature to have when it comes to any sort of down hill. Even if your just cruising. It would mimic a manual transmission vehicle
@nate9392 5 ай бұрын
I have same motor 2300kv love it run on trx4 K5 Blazer it perfect now think of get 1400 kv on wraith since it only one speed might need much torque don’t care for speed but maybe add 2 speed transmission later in future
@Abracourcix71 2 жыл бұрын
Since we all know it’s made by Hobbywing for Spektrum, I’m pretty sure with all those hw programming cards out there somebody will try and share if it works fine or not. My hw box works just fine with The Spektrum Firma 40 combo…
@scottoblander9419 2 жыл бұрын
interesting, I thought Castle had a patent for programming the esc over the signal wire, and that's why hobbywing used the on/off switch location. Seems that's changed?
@scalebuildersguild 2 жыл бұрын
Gosh, that's news to me! I'll have to do some research!
@scottoblander9419 2 жыл бұрын
@@scalebuildersguild I think I heard John Holmes mention it on a video a long time ago.
@BlueDually4x4 2 жыл бұрын
Does seem a little odd they don't give you the program card, when their main competitor does.
@kloudkreeper 2 жыл бұрын
Very few negative reviews on the HW Fusion. I'm glad that's what I chose.
@smokingwraith9990 2 жыл бұрын
Super review Matt, thanks! Been thinking of trying one of these out. How smooth is their start-up for the slow crawl?
@scalebuildersguild 2 жыл бұрын
Like butter. Insanely good low end.
@slowcrawler2695 2 жыл бұрын
Slow crawl you say? 😆
@mnmvuk 2 жыл бұрын
@@slowcrawler2695 LOL
@smokingwraith9990 2 жыл бұрын
@@slowcrawler2695 😄 are they good for you? ...gotta know
@slowcrawler2695 2 жыл бұрын
@@smokingwraith9990 no personal experience with the spectrum 2 in 1 but I'm using the Hobbywing Fusion 1800kv, I like the simplicity of it, plenty of power as well. I like full interior and the more space and less wires the better imo 👌 I'm sure the spektrum is very similar 😁
@619MotoXXX 3 ай бұрын
I have the same system but.. no matter what i set my drag brake setting at, my truck locks up as soon as i let off the throttle, i use the Spektrum dx5 rugged, what setting does my controler need to be at for my drag brake to work?
@yiarkungfu 2 жыл бұрын
I put the Hobbywing Fusion in my Capra and it was a bit tough. I had to cut a bit of the chassis and interior. This Spektrum should go straight in.
@ryanwalter757 2 жыл бұрын
I would love to see a 4000kv version and it was waterproof
@cesco_rc 2 жыл бұрын
I like it, but the big question is. Will Hobbywing offer a 2300KV Fusions any time soon? As the Spectrum Firma 2-1 is made by Hobbywing.
@johnathanfarquhar1981 2 жыл бұрын
They make a higher kv now and a shorter can.
@cesco_rc 2 жыл бұрын
@@johnathanfarquhar1981 correct, I bought one recently.
@max.rcpassyon387 2 жыл бұрын
as always very nice video with a pinch of irony and sympathy but everything always explained very well. a greeting from Italy 👋🏻
@scalebuildersguild 2 жыл бұрын
Thanks for watching! Grazie and Buone vacanze!
@jerryvolpini7987 2 жыл бұрын
Great job, Matt, thanks!
@scalebuildersguild 2 жыл бұрын
Glad you liked it!
@nukedathlonman 2 жыл бұрын
That program box looks awfully familiar. When I get home I need to pull the part number off the hobbywing one I own and ask if it's compatible. Then again, to my irritation, the Hobbywing ESC program box I have is not compatible with the Hobbywing 1080 forcing me to annoyingly keep multiple programming cards (all my race RC's are Hobbywing ESC's for keeping this simplified).
@nukedathlonman 2 жыл бұрын
Okay, is that program box the same as the Hobbywing Multifunction LCD Program Box HWI30502000. Oh wait, you said it still won't work. Gaa, why can't they simplify these things - I want to minimize on things like program boxes. :-(
@miketyphoon8885 2 жыл бұрын
@@nukedathlonman They can't simplify these things, because they want to make more and more money!! Therefor this Combo makes no sense to me, because it's too expensive in comparison to the Fusion one! The only reason to buy that one is the 3mm shorter length!
@nukedathlonman 2 жыл бұрын
@@miketyphoon8885 I don't care what they want - I don't want to have hundred of program cards kicking around. ;-)
@Xofroggy 2 жыл бұрын
The fusions are winning just because of the program card being included with it
@chrisryder4709 2 жыл бұрын
That's a great thing to do to a summit , I just sold mine , to get a hpi nitro Savage , Kev , I really would like to see a nitro video at that site your on , in this video , take a look at the Savage , they have a E version too !
@scalebuildersguild 2 жыл бұрын
I think you might have meant this comment for another video.
@sharonneedlesfreedomsnotfr813 2 жыл бұрын
_Dynamite offers this setup in the losi mini b..its a brushless 6000kv_
@GrimJerr 2 жыл бұрын
Unless you are a spektrum fan, HW is a much better option, (don't tell Matt I told you, but the LED programming card is included with the HW fusion). The great thing is there is a plethora of options from Competition to Axe FOCer's like me. The fusion motors are a nice option, but I've become spoiled with the Bluetooth programming, and is just one of the features that makes me love the AXE system so much, as it is built into the ESC, no dongle or extra card to program. Really makes programming the ESC on the fly a luxury.
@GrimJerr 2 жыл бұрын
AXE FOC R2 have a trailing mode. so when I have my Gen8 Axe out I can switch modes (in the ESC), as I need for the terrain. Trail to the climb, change modes and get to hilling. Joe Dirt central plains, rocks here are a Decorative feature not a natural geological occurrence. ; - }
@krisbahler8264 2 жыл бұрын
Hi Matt Being a 540 is a little exciting for the Capra owners out there, I'm looking for a motor and esc combo, not necessarily integrated but did wonder if you know whether this product will fit a Capra
@brandonwilliams2431 2 жыл бұрын
They are the same length as the hobbywing fusion = 550 length. I actually just went and measured both it is 3 mm shorter than the hw
@krisbahler8264 2 жыл бұрын
@@brandonwilliams2431 hey that's great news Brandon! Will the hobby wing fit into a Capra in that case?
@miketyphoon8885 2 жыл бұрын
@@krisbahler8264 No, too long!
@krisbahler8264 2 жыл бұрын
@@miketyphoon8885 👍
@therccrawlerkid3213 Жыл бұрын
Can you please do a video on your gray scx24 JLU. 19
@Rokstardad82 2 жыл бұрын
You are smart….smrt 👍 great video as always Matt!
@SteveSherar 16 күн бұрын
I'm trying to find out why both my 2300 firmas run so hot? I'm running on 3s. But trail walk to the rocks, and then crawl 10 minutes, and motor very hot to touch.
@scalebuildersguild 16 күн бұрын
Your gear mesh must be too tight, or you’ve geared it too high
@zer02garage83 2 жыл бұрын
Shame they made it so proprietary. I have the newest HW program card, and would have grabbed the 2300kv in a heartbeat if it worked with the programmer I have already. Otherwise, great review! thanks MAtt!
@andresdejesus 2 жыл бұрын
Nice system but I have a question about the lights on the G-made l would like to see how you connected all the lights maybe in a video or pictures i just don't have any idea how to connect all the lights if you could be so Kind please 🙂👍🏽
@DoubleADay 2 жыл бұрын
I went with the Quicrun fusion 1800kv instead. I feel that hobbywing products are higher quality in my opinion. I already have the esc programmer for my LMT but HH electronics have left something to be desired. Good info though, thanks again
@scalebuildersguild 2 жыл бұрын
You know they're both made by Hobbywing, right?
@JoeOvercoat 2 жыл бұрын
The ring lighting is creepy when used as intended. I dig it on the wall, tho.
@jdsrcs8061 2 жыл бұрын
Pretty interesting take. I have thinking about getting one these 2in1's. 👍👍👍 A 550 would be nice.
@michaelhoyle3266 2 жыл бұрын
Buying a separate programming card isn't necessarily a deal breaker. Worth it if you will buy the system for more than one rig. I have a stack of programming cards for HW 1080's and only need one. I was wondering if you can switch off the FOC? I actually enjoy throttle(trigger) management for "driving".
@scalebuildersguild 2 жыл бұрын
I believe there is a setting for changing it's strength.
@jonlaird5082 2 жыл бұрын
I'm building a TF2 kit but in the lwb version with the xtracab body. I plan on keeping the leaf spring setup as I love leaf sprung trucks,lol. I'm thinking about using a spektrum setup. If I were to use this 2 in 1,which kv would you pick? Also is there any other spektrum motor and esc you would recommend? I do plan on doing local comps if it matters. Oh and I'm running a gcm transmission. Thanks for your help
@scalebuildersguild 2 жыл бұрын
I'd go for the higher one of the two. Good luck!
@joedbz7146 11 ай бұрын
Will the lights still work with the 2-in-1 or would i have to get a seperate light controller wth the early bronco?
@scalebuildersguild 11 ай бұрын
Lights generally can also plug into an open slot on your receiver, so you should be okay!
@mikeraftis6332 2 жыл бұрын
Hey Matt what size did you make they bays in your truck shelf behind you? Thanks ahead of time.
@scalebuildersguild 2 жыл бұрын
They’re from IKEA, and are called Malm I think.
@Mexneck.media2023 Жыл бұрын
Will it fit in a trx 4 blazer
@jeffmofo5013 2 жыл бұрын
You talked a lot about FOC, has anyone setup a planetary gear setup to slow the speed of the motor?
@Bradkozakandfriends1830 2 жыл бұрын
You said in the video you’d like to see a 3300kv version. Now they have it but I’ve seen comments that it’s more for a basher than crawler. Your thoughts?
@scalebuildersguild 2 жыл бұрын
With proper gearing, that sounds just about perfect to me! Thanks for watching!
@Til468 2 жыл бұрын
Hobby wing started it? Team Orion DDrive.
@rueagonvyceratops2879 2 жыл бұрын
But how waterproof are they. since i love to crawl in creeks and all , i want to make sure it,s waterproof good . so im not on the trail and it kills over from some water , since i do go under in places and not stay above the water .
@scalebuildersguild 2 жыл бұрын
I would say this one is water resistant at best… not for submerging.
@cbforme 2 жыл бұрын
Aren’t spectrum esc made by hobbywing?
@rccvs4355 2 жыл бұрын
Great video, not sure if this question was ask or not, have you tried the Hobbywing version program card, since its HW that makes them for Spektrum ?? Thanks !!
@scalebuildersguild 2 жыл бұрын
No... it won't work! Unfortunately, you need the Spektrum card.
@rccvs4355 2 жыл бұрын
@@scalebuildersguild Perfect thanks Matt !!
@jameshankssr466 Жыл бұрын
I just bought 2 of the hobbywing fusion se 1800kv 2in1 motors they are great and they fit in the vanquish phoenix with no mods the whole unit is only 58.1 mm long its shorter than the fusion pro which doesnt fit the phoenix
@scalebuildersguild Жыл бұрын
Good to know, thanks!
@crawlerballer 2 жыл бұрын
look at that rig hot damn!
@laserbeam1620 2 жыл бұрын
"FOC or FOOOOOOC" Bahahahhahaa I laughed so hard!
@ethanboslem2448 Жыл бұрын
So my question would be..i have the program card for my mojave 6s. Would that be compatible for the 2in1? Or like would the card need to be updated?
@scalebuildersguild Жыл бұрын
You need the SPMXCA200. Thanks for watching!
@michaelmanahan4723 2 жыл бұрын
Question? Can I borrow that black blazer behind you? Love it.
@scalebuildersguild 2 жыл бұрын
Hahahaha
@fastslash25 Жыл бұрын
the 3 pin connector is a dupont style connector not jst
@scalebuildersguild Жыл бұрын
Thanks for clarifying!
@MrAlexp87 2 жыл бұрын
Thanks for the video! I thought about putting one of these in my son's Gladiator. He does more driving around the street and grass than actual rock crawling. Would the 2300 be the one to get in this case, or should I get the 1400?
@scalebuildersguild 2 жыл бұрын
I’d probably go 1400 for that scenario.
@MrAlexp87 2 жыл бұрын
Thanks!
@CoeShow619 2 жыл бұрын
Do you think I could wire two of those up together to run 2 Motor on axle for a Bully2? I think I can bring the two battery connectors into one connector for one battery and I can use mixing to control both throttles from separate channels. Any thoughts with that? Thanks.
@scalebuildersguild 2 жыл бұрын
I don't think you'd want to run from one battery, that sounds like a bad idea. Why not just run two smaller batteries?
@CoeShow619 2 жыл бұрын
@@scalebuildersguild It’s for a Bully2 comp crawler with a 3s 1500mah lipo on the front. I don’t want to add weight to the rear and there is no room anyway. I get about 1 hour run time with brushed motors. That’s long enough. I just ordered 2 of these brushless 2 in 1’s anyway. I’ll make a video on it for some MOA action. I thought even if they are heavier, the weight is down low, and the FOC should make control awesome. I am making a parallel harness basically to run off one battery. I’ll hide the harness with the receiver in the cab of the Bully. It should be real clean in the end. Looks like I’ll probably have two on off switches though. Kinda weird how they wire those only as a giant push button. Thanks for your help.
@KenMrKLC 8 ай бұрын
I have the 2300 version in my SCX10iii running on 3s .. Anyone used 4s? I know specs say 3s but some things are under rated..... I am going to assume 40A ESC would be the limiting factor here? The motor would prob take it fine but not the ESC I presume however I figured I would ask.... I may just say F it and run it and see how long it lasts... Worse case I can go back to traditional setup which I may want to do anyhow
@scalebuildersguild 8 ай бұрын
These are rated for 3S Max. Proceed at your own risk.
@rcpete7055 2 жыл бұрын
Wow that Bodyshell is awesome can you buy it separately? Where can I order please? 😊 👍
@scalebuildersguild 2 жыл бұрын
It's from Gmade. Not sure if they offer it separate!
@jimfeeney9499 2 жыл бұрын
I am thinking of getting this or a similar 2 in 1 motor/ESC for my new SCALE build RC Speedy LMT Monster truck. I am more interested in eliminating the ESC from being seen versus pure performance. Any thoughts on the 2300 KV - 2 in 1 for my application or maybe the Hobbywing? Thanks -Great vid's as always
@scalebuildersguild 2 жыл бұрын
I’d definitely go for the 2300kv version for a Monster Truck.
@jimfeeney9499 2 жыл бұрын
@@scalebuildersguild I appreciate the response. This ones more show, not so much go.
@andrewdecavia7553 Жыл бұрын
any opinion on this Spektrum 2 in 1 vs the Fusion Pro V2? Looks like the updated version is the same dimensions and just .2oz heavier. Looking for a new motor for my TF2 Marlin with the A7M skid and transfer case flipped for OD, so brushed motors are smoking! Was looking at Holmes motors but at the $150 price i may as well do one of these!
@scalebuildersguild Жыл бұрын
I'd go Holmes if I'm honest. Super reliable and built for performance.
@andrewdecavia7553 Жыл бұрын
@@scalebuildersguild do you run a sensored brushless in your TF2 Marlin? I keep being told with the A&M skid and flipped transfer case with that aggressive OD i should run brushless sensored to prevent more electrical failures. I have a spare purple BL 540 1800 and mini V2 i could drop in, but have been hesitant since i keep being told to run a sensored motor. Otherwise considering a Standard Puller PRO V2 2200 and copperhead, but would like a ten shooter if i could swing it.
@christianascencio336 2 жыл бұрын
Any updates on the k5🤔
@BANTAM53 2 жыл бұрын
Can you try stuffing it in the Vanquish Phoenix? :-D
@marc9164 2 жыл бұрын
Would it fit in a Capra.? If yes, which one would be better from a crawler?
@sweatbigcon9729 Жыл бұрын
I’m trying to find out if it fit did you go with this motor combo or something else
@scale_nerd356 2 жыл бұрын
I’ve been thinking about putting the 1400 in my TF2 4Runner rtr? Any input on that?
@scalebuildersguild 2 жыл бұрын
That would be a good application!
@nelsonkarrer6961 Жыл бұрын
Will it fit in a Axial Ryft RBX10
@scalebuildersguild Жыл бұрын
Yes, but it's not going to offer the same kind of wheelspeed.
@Charlieoil Жыл бұрын
What truck is this in the video.
@scalebuildersguild Жыл бұрын
GMade GS02 Buffalo. thanks for watching!
@J4me5De1t0nniu5 2 жыл бұрын
FOC is like downhill decent control… deft keeps you from rolling over going down hill.
@fdougwillman132 2 жыл бұрын
Yes, you did allude to it last night, but……#brougthtoyouby 😂 Can FOC be turned off with the additional programming card?
@scalebuildersguild 2 жыл бұрын
Ha! If I recall, there's an opportunity to disable it, yes.
@mylifted4x4 2 жыл бұрын
Back-ordered through FEBRUARY!?!? Dang
@toadady 2 жыл бұрын
what's the link to the programming box?
@scalebuildersguild 2 жыл бұрын
bit.ly/3oln66C
@600tian5 2 жыл бұрын
Since it has a shorter can than Fusion, does it mean it is less powerful than a Fusion?
@scalebuildersguild 2 жыл бұрын
The HW tops out at 1800kv, so no, I'd argue that the 2300kv version of the Spektrum is going to be more powerful.
@frankkrivitz3323 2 жыл бұрын
Fit perfectly in my Phoenix without any modification. 2300kv...
@scalebuildersguild 2 жыл бұрын
Weird! I swear it rubbed it two different spots. I'll have to try again on the next one I build. Thanks!
@frankkrivitz3323 2 жыл бұрын
@@scalebuildersguild Phoenix fully built tranny without motor. Remove spur and 2 screws holding motor plate to tranny. Install 2in1 motor to motor plate and reassemble. Easy peasy!
@adanlopez5155 2 жыл бұрын
Will it fit in a trx 4
@scalebuildersguild 2 жыл бұрын
Yep!
@adanlopez5155 2 жыл бұрын
Ty
@forrestcrabbe 2 жыл бұрын
🤘🤘🤘
@visionary_rc7987 2 жыл бұрын
Been thinking about a 2300 for my gatekeeper, because I want a tad more power, and space is limited. Would I be able to see things tike temperature and rpm on a dx5 rugged even though it’s “dumb”? (Great analogy by the way, made me laugh!)
@scale_nerd356 2 жыл бұрын
Cant you adjust settings on your controller?
@scalebuildersguild 2 жыл бұрын
No, it’s not a smart capable ESC.
@scale_nerd356 2 жыл бұрын
@@scalebuildersguild don’t they have a new crawler motor with a smart esc?
@scalebuildersguild 2 жыл бұрын
@@scale_nerd356 yes, this isn’t that though.
@KL-zb5oz 2 жыл бұрын
GF02F use 1400kv so good
@johnbarnicoat9423 2 жыл бұрын
The Punch and Max Forward Force options don't show in the app or program card. Any fix for this? Using all the latest software and firmware. Updating. The community might want to know. Matt, if you don't want this let me know or remove. In touch with Horizon Support- they have confirmed that 2300kv and 1400kv motors in their warehouse are bad. The ESC functions are not all working. They have to go back to the maker in China (HW) to investigate. Chinese NY for the next 2 weeks, so I have a $150 paperweight on my bench and who knows when it might get fixed. Thanks Spektrum. My recommendation is to stay away from this product.
@scalebuildersguild 2 жыл бұрын
Sorry, that's a question for Spektrum. Wish I could help!
@DakaSilver 2 жыл бұрын
You don't need to shave nor modified this motor to fit the VS10pp. Tight fit but no modifications needed.
@scalebuildersguild 2 жыл бұрын
No, the motor doesn’t need modification but it definitely hit the upper link mount when I tried putting it in. Major deflection if left like that!
@DakaSilver 2 жыл бұрын
@@scalebuildersguild , that is weird... mine doesnt hit anything.
@BlindGuyRc 2 жыл бұрын
Thats an awesome combo. I'll get one some time. Hahahaha. I have a list. I like those lights.
@theoalbert897 2 жыл бұрын
I've heard the hw program cards work with them
@seandeanchevy 2 жыл бұрын
Team Orion made the 2in1 years ago.
@pacificxnative8818 2 жыл бұрын
Spectrum is all about the money and not about helping nthe hobby move forward. Ridiculous that you have to get NEW everything. Sticking to HOBBY WING 🤙🏽
@NCMOUNTAINSbackyardRC 2 жыл бұрын
👌"
@jonthomas8487 2 жыл бұрын
Pretty crappy Horizon put some sort of blocker in it so it can’t use the Hobbywing program card. They had to have physically made it that way as everything else is basically Hobbywing except for the color
@jerrywatson1958 2 жыл бұрын
Thanks with all the negatives, I will not be buying this motor esc combo. Thanks for the info.
@scalebuildersguild 2 жыл бұрын
Fair enough!
@tatesrclife5873 Жыл бұрын
Hobbywing v2 programm card works just thr same ans it's cheaper
@robertruiz5417 5 ай бұрын
This is insane
Friendeez
Рет қаралды 13 МЛН
Horizon Hobby
Рет қаралды 17 М.
RCDriver_Online
Рет қаралды 74 М.
RC Review
Рет қаралды 43 М.
Cape Crawlers
Рет қаралды 20 М.
RCDriver_Online
Рет қаралды 34 М.
RC Review
Рет қаралды 52 М.
Havik Hobbies
Рет қаралды 1,4 М.
HolmesHobbies
Рет қаралды 99 М.
L2theW
Рет қаралды 3,1 М.
jamoloniy
Рет қаралды 2,9 МЛН