I'm experiencing the arms coming up even when the control lever is in the down position. I've figured out that the switch on the pump will raise and lower the arms but it seems like the rod on the inside isnt moving
@xpsgarage3 күн бұрын
If the inner control rod isn't moving with the quadrant lever then I would pull the top cover and see if something is broken.
@maze74911 ай бұрын
Think I got the opposite problem, my position control is jerky like when you had the draft control lever partially engaged and it only works properly in the bottom third adjustment on position control (Haven't touched draft control), anything higher and I have to play with the lever to get it to raise
@xpsgarage11 ай бұрын
Definitely sounds out of adjustment. I still need to fine tune mine a little more and try to get it perfect. These tractors are so old it's hard to tell what's happened to them in the past.
@cspfitch5 ай бұрын
Can you please let me know the name of that cork you put in because that is my problem. Thank you.
@xpsgarage5 ай бұрын
Google "8N hydraulic control friction disk" and you will find lots of sources. I think I bought mine from Steiner.
@joedirt96006 ай бұрын
My 1949 8n will only lift the back blade about half way, that's with and without the back blade. Changed hydraulic fluid but made no difference. It has come up all the way , but only twice..in the 2 years I have owned it...any suggestions ?
@xpsgarage6 ай бұрын
Can you make it come up farther by moving the quadrant adjustment?
@joedirt96006 ай бұрын
@@xpsgarage no the control will go all the way up and down. But the arms only come up half way.. with or without a load.
@xpsgarage6 ай бұрын
@@joedirt9600 By quadrant adjustment I'm talking about the 4 bolt plate at the base of the control. Look at 2:35 in the video. That plate moves forward and back and makes big adjustments to what the control lever is doing.
@joedirt96006 ай бұрын
@@xpsgarage it has come all the way to the top twice since I bought it a couple years ago. I understand what you mean now and will check that out..thank you