9.5" Inch 4140 Gearbox Shaft Part 1

  Рет қаралды 6,474,361

Abom79

Abom79

6 жыл бұрын

First of a short series of videos about machining a 9 1/2" gearbox shaft. This shaft is very similar to my past Heavy Metal Machining series, so I try and give you guys some different angles, and information I may not have shown before.
In this video we get the ends centered, set up in the Pacemaker and begin roughing the shaft down.
I have some pretty nice 1/2" metal removal cuts getting the ends turned down.

Пікірлер: 1 900
@danielwatson1266
@danielwatson1266 4 жыл бұрын
I spent 5 years working at a scrapyard and seen many varieties of turnings come in barrels. To keep from feeling like a brain dead zombie running a a magnet through the turnings to separate the iron from the alloy I'd always look at the details of the turnings and put a story to how it came to be. From the variation in colors to the how smooth some of the edges were compared to how rough others were. Even like finding the longest fry from McDonald's there's finding the longest spiral from the machine shops. Now I get to see my stories unfold😆.
@donaldplaysyertrousers134
@donaldplaysyertrousers134 2 жыл бұрын
I do the same with pubes in public toilets
@aus71383
@aus71383 6 жыл бұрын
The annotations of cut depth, feed rate, and RPM were a great addition - I'm sure it was a pain adding that to the video editing process. Your efforts are appreciated! I am learning a lot...
@millomweb
@millomweb 3 жыл бұрын
Yeah - it's made me start making a feeds table for my lathe ! So there's one already on it - but I'd never taken any notice of it ;) Now I've looked at it, I see the data is in 3-4 'different languages' - so I'm converting the data all into thous per spindle rev then will convert the finished table into metric values.
@tokiviswu2563
@tokiviswu2563 3 жыл бұрын
@@millomweb m
@makouli
@makouli 2 жыл бұрын
A real joy watching somebody who knows what they're doin'. No idle chatter, no editorializing, just solid, useful information. Thank you, sir.
@error200http
@error200http Жыл бұрын
Yes certainly someone who uses inches with decimals knows what he's doing.
@DB.KOOPER
@DB.KOOPER 4 жыл бұрын
It's so interesting watching you makes these parts and very relaxing to watch the mill/bits/etc take metal off. Love this channel so stoked I came across you guys. Cheers.
@scowell
@scowell 6 жыл бұрын
Love when you give the feeds/speeds/insert data in the video... nice touch. Glad you're able to give us more day-job video. Stay dry and safe.
@jeromewelch7409
@jeromewelch7409 6 жыл бұрын
Nice to see you videoing again at work. I see they woke up ! Thank you Adam.
@daveycrockett64
@daveycrockett64 5 жыл бұрын
Very enjoyable. Reminds me of helping out at my dad's factory when I was a teenager.
@lonwillis783
@lonwillis783 7 ай бұрын
Love watching your older videos. Thank you
@Nehbur
@Nehbur 5 жыл бұрын
As an engineer who draws these parts I absolutely love watching a skilled craftsman make it. I learn a lot from it. It makes me think more about the possible problems a craftsman can encounter.
@skycorrigan6511
@skycorrigan6511 2 жыл бұрын
As an engineer who draws better parts than the guy above me I absolutely love watching a skilled craftsman make it. I learn a lot from it. It makes me realize that my drawings and designs are perfect to the point where the craftsman will not encounter any problems.
@johnbell1396
@johnbell1396 2 жыл бұрын
lmao
@johnbell1396
@johnbell1396 2 жыл бұрын
As the Toolmaker/machinist that has to make the parts the guys above me draw; it's my job to catch all their mistakes and make the parts correctly the first time under budget. Sometimes I even amaze myself.
@Nehbur
@Nehbur 2 жыл бұрын
@@johnbell1396 I wholeheartedly agree with you. It is however, part of our job to have to draw up assembly's with weldments, lathed and milled parts considering all other purchased parts, sensory etc. But I/we do consult the craftsman very often when we run into uncertainty.
@simon1italy
@simon1italy 2 жыл бұрын
@@johnbell1396 where I work, I both write up jobs including drawings and procedures or, when needed, I double check jobs created by others. I can tell you that making a job/drawing starting from scratch is A LOT different than just double checking it. At the end of the day, the company is profitable when everyone does their best at what they do. It's team work.
@ianhenson724
@ianhenson724 5 жыл бұрын
A brilliant Video, loved it. My Dad did this for G.M for 34 years he was a toll maker and he was shit hot at Maths the things he made i still remember today. Brilliant Video - Ian u.k
@thorild69
@thorild69 3 жыл бұрын
Thank you for such informative videos. I've never run machines like that, and the sheer patience you exude while coaxing the final shapes out of cold hard steel is impressive.
@sheemondallasgeorgia
@sheemondallasgeorgia 3 жыл бұрын
I am, every now and then, running into these old videos. And I watch them to see an Old Master at work (yes, Mr. Abom79, you have crossed into the domain of Old Master - this from an Ancient Used To Be ;-). But what really touches my heart is the picture of the three generations with which you closed (still do?) All your movies. This shows respect to those who came before you, and reminds/teaches those that came after you that a middle aged master can produce excellent quality and that special wonderful beauty using tools conceived thousands of generations (lifetimes, really) ago, and built some 70-80 years ago. Such tools were built without any digital (or even electronics) circuit doing the measuring (or accuracy + quality assurance) for you. That all a man needs are some very basic tools and in a few iterations (generations) he can re-build our civilization from scratch. And these needed basic tools can be produced by anyone with the basic understanding of our tools and machines. Thus, our continued survival is assured with the basic understanding that God has given each of us. Now, I am not saying that we think this two-bits philosophy goes through our mind with every job we run. But we do, at times, think of these things, at least in part, every now and then. Thank you Adam, for reminding us who we are and what we are thankful for. [And I do the PIC thing & sign my real name] Simon
@calraines6931
@calraines6931 6 жыл бұрын
Enjoyed that, brought back a ton of memories from the assorted lathes I ran at Dresser from 74-98. I bid off machines at the end and finished up as a Test Stand Inst. Mechanic my last 9 years. Miss cutting chips, but not holding half thou tolerances lol. You do your Dad proud, and no mistake!
@leoindebraekt3964
@leoindebraekt3964 4 жыл бұрын
cal p Okkk
@prasadjr2893
@prasadjr2893 2 жыл бұрын
@@leoindebraekt3964 6
@bruceb3786
@bruceb3786 4 жыл бұрын
I love watching this stuff all day. Shows me what I WISH I was doing. Thank You !
@paul_domici
@paul_domici 3 жыл бұрын
I'm a jewelry Model Maker and just got recommended from Trenton and Heath! I work with machines on a much smaller scale! Your page is amazing!!!
@danielqualtire8488
@danielqualtire8488 4 жыл бұрын
Hey Adam, just wanted you to know that I enjoy and appreciate your videos. I am not a machinist, I have been in the plumbing/ HVAC trade for over 45 years. I learn a lot from watching you.Thank you.
@scottlundy257
@scottlundy257 6 жыл бұрын
The only thing I like better than machining, Is watching you machine always such smooth moves
@woodsmn8047
@woodsmn8047 5 жыл бұрын
I am an old machinist myself...thanks for the memories.. and for keeping the trade alive
@mwnciboo
@mwnciboo 3 жыл бұрын
Love you guys, you built the modern world for us. I have a book on the Saturn V Rocket, and it says in there that we couldn't build a Saturn V today due to the lack of extremely skilled machinists for key components like the Turbopump on the Rocketdyne F-1's. I'm sure youngsters can do it, but we need to pass these hard won skills on, who knows when we will need it again? The death of Apprenticeships and lack or work, for all the benefits of CNC the amazing skill of an individual to do it with eye and instruments to incredibly precise tolerances is amazing. Technology used to enhance skill, now it replaces it.
@januarioqueiroz3122
@januarioqueiroz3122 2 жыл бұрын
What a good professional and person you are! Thank for sharing your joy of being doing what you love with us!
@marknunya3035
@marknunya3035 3 жыл бұрын
I really did not understand everything that my grandfather told me especially about tool and a dye until I started watching what you're doing a month ago. he was Tool & Die maker for 40 plus years AFTER World War II (He was a POW) reminds me so much of my grandfather and how unforgiving he was in how everything had to be just so I never understood Y until now!!!! Ty he was perfecuonist... NOW I get it.
@markworkman3031
@markworkman3031 5 жыл бұрын
Nice to watch someone that can visualize the finished part inside the raw stock, understands end-to-end runout (and how to manage it), and can properly add roughing allowances when working from both ends of the part. I got soooo tired of having to go out to the shop and hold someone's hand and instruct them step-by-step, or have to cross-examine them to figure out how they managed to make a crooked shaft or have one segment too short. Retirement is nice! P.S.: Love the Mighty Mag trick and wireless hoist control!
@MacCekko
@MacCekko 4 жыл бұрын
Awesome! Pardon my dumbness, but it's simply amazing how you treat metal as if it was wood. Never seen such a beautiful thing!! Thank you for sharing!
@tomspitz5128
@tomspitz5128 5 жыл бұрын
Dude, your skills are very impressive! I wish more kids would aspire to learn your trade and be like you!
@danielpullum1907
@danielpullum1907 2 жыл бұрын
Nothing better than turning a rusty ole piece of steel and finding that beautiful shiny metal underneath.... Watching you center that piece in the 4 jaw reminds me that you can't put a price on experience.
@heartsky
@heartsky 6 жыл бұрын
Great camera angles and superb editing -- just the right amount of time on the various angles, and your smooth narration, you combine these in a straight forward & honest way that relaxes, educates, entertains.
@erikig
@erikig 5 жыл бұрын
deesine For real, anyone that’s ever tried to shoot in their shop/garage will realize that it takes a lot to get the lighting, angles, editing etc perfect, not to mention doing it safely and quickly 👏👏
@mzimbuyazi7705
@mzimbuyazi7705 3 жыл бұрын
Working on a manual lathe is art,turners are underrated in SA.I’ve done a lot of work pieces on a lathe from big to small.good finishing bro🙌🏾.wish to work with someone like you in the future
@somnathlungase
@somnathlungase 3 жыл бұрын
Hi... It is nice to hear that you have done lots of work on Lathe... Me too... please let me know your mobile no.
@XxGarbSxX
@XxGarbSxX 5 жыл бұрын
Really good work. Reminds me of my machinist friends from my last job doing precisely this kind of work. I learned a lot from them and I'm always surprised how much I remember. Working with them has made me a better engineer.
@Robertrls01
@Robertrls01 3 жыл бұрын
A lot of precision goes into machining parts, I'm sure you take pleasure in the work you do. Great Job
@paulhunt598
@paulhunt598 4 жыл бұрын
Adam, We did our heavy turning between centers. This allowed for secondary work on the cylindrical grinder to run between centers. We acquired a G&L Endomatic in the mid 80's to prep our rough material. The G&L used self centering vises to establish an ind ensure varying material diameter was always centered on the machine. Mill heads rapidly simultaneously machined material to finished length. Center drills then simultaneously drilled center drilled holes on each shaft end. This machine eliminated all the lathe set up effort that your video process required. The G&L was fast to set up, repeatable and accurate. This was easy for the machinist to use, but this machine was among the most difficult machines for the maintenance mechanic (me) to level, align and keep mechanically true. Prior to the G&L purchase, we had to use similar lathe processes to your demonstration. The G&L was ideal for production work (our world), but proved just as effective for one-off work. Due to embracing Lean Manufacturing methods One Piece Flow required one-off production with SMED set up changes. About 2015 we upgraded our processes and considered replacing the early 80's CNC lathe and the old G&L with current CNC lathe with full milling functions and two spindles. This option could not out perform our G&L and standard CNC lathe cycle times, required larger shop footprint and much larger machinery investment costs. We purchased standard (older) lathe technology (although a brand new CNC machine) and rebuilt the old G&L. It is fun for me to see you still embracing older methods with older machinery. In my retirement I am moving from being the machine repairman to learning to do manual hobby machining in my basement shop. There are a handful of you KZfaqrs that are my constant companions and instructors. You are a favorite. Keep the content coming. I like your transition to your own shop nearly as much as your Motion Industries days. I especially enjoy references to your father and granddad. I am currently training a bevy of grandsons and other boys into electricians. My boys followed me into the trades and now I am getting to shape the next generation into that direction. I wish for you that you could have sons that would accept the next generation mantle. I had 5 sons and now 13 grandsons that I get to help shape.
@danbdanb3
@danbdanb3 4 жыл бұрын
show video
@jimturkington9641
@jimturkington9641 4 жыл бұрын
Good centre lathe Turner , great job, nobody appreciates how the 4 jaw Chuck is our friend. Keep it up.
@vulgar5595
@vulgar5595 2 жыл бұрын
The care taken to make these videos is much appreciated, Awesome job
@ronaldclavey2803
@ronaldclavey2803 4 жыл бұрын
I was a lathe operator for several years. I have been retired for 8 years now and this sure brings back memories. Thanks to you and your boss.
@macsleeper237
@macsleeper237 4 жыл бұрын
That’s a nice chip 👍 I’m a (CNC) machinist. I dabble in manual machining (taught on a Southbend) & just bought a tiny hobby lathe. I like the dials & handles. You’re a specialist. I hope you charge for the special skill set. Keep up the vids. Good job on the wood toolbox tour as well. Reminded me of the old PBS docs & shows on Sundays.👍
@Pow3llMorgan
@Pow3llMorgan 6 жыл бұрын
Oh how I love these where we get to see a shiny part emerge from bare rusty stock!
@jumi9342
@jumi9342 5 жыл бұрын
I can tell that's the most satisfying part of milling and turning
@daleburrell6273
@daleburrell6273 5 жыл бұрын
Well, if ya LOVE it so much- then why don't ya MARRY it?!
@jumi9342
@jumi9342 5 жыл бұрын
@@daleburrell6273 there is no finger to put a ring on...
@daleburrell6273
@daleburrell6273 5 жыл бұрын
@@jumi9342 ...that's true-!!!
@daleburrell6273
@daleburrell6273 5 жыл бұрын
@@jumi9342 GOOD ONE-!!!
@robertmegrey5348
@robertmegrey5348 3 жыл бұрын
I am a retired manufacturing engender/ Machinist. I have so much information in my head. It’s good to watch your videos. And enjoy what you do
@NeverlostatBSgaming
@NeverlostatBSgaming 4 жыл бұрын
I keep coming back to this set of videos cause of how awesome they are
@mikenixon9164
@mikenixon9164 6 жыл бұрын
Very nice work Adam as always !!
@alanhardman2447
@alanhardman2447 5 жыл бұрын
Excellent work. Thanks for posting. Almost makes me want to go back and do it another 38 years... Nah, never mind.
@jonsey3645
@jonsey3645 4 жыл бұрын
The music that you use is so perfect to accentuate the beauty that you rend from rusty blanks. You are an artist Sir, your precision, your attention to detail and your innate understanding of the forces of nature are truly inspiring and... BEAUTIFUL. Thanks for allowing me to see the process, even if I don't understand the fine points.
@saracui8381
@saracui8381 2 жыл бұрын
Perfect job! As a Machinery guy, i couldn't think more complimentary word say to you, i just cant leave the screen for a sec.
@Winther83
@Winther83 6 жыл бұрын
Have a hard time to understand how people can't see the beauty in sculpting steel and iron as a mason does with stone. in the end the result is both beautiful to look at and useful. that is why i learned to become a machinist and now studying metallurgy and foundry processes to be able to develop the (Swedish) speciality steel industry. for the love of the art and craft of forming metal from foundry to a finished product. watching this is just like meditation. :D
@ducatiparts966
@ducatiparts966 5 жыл бұрын
I find it very easy to watch your videos. You are so well versed at what you do that it is easy for you to explain what you are doing. It’s so great to see someone who knows what they are doing like it’s 2nd nature. Great job!
@JosipMiller
@JosipMiller 5 жыл бұрын
This is great channel. I myself am electronics technician but I really admire work of machinists in my firm.
@mariedillon2900
@mariedillon2900 5 жыл бұрын
Great video. Machinist are so under appreciated compared to other trades. Manual machinist are skilled craftsmen
@KnowledgePerformance7
@KnowledgePerformance7 5 жыл бұрын
I wish I had the skills these guys have! Such an art.
@bingosunnoon9341
@bingosunnoon9341 5 жыл бұрын
Some of us are but some of us are just too dumb to do anything else.
@SuperAWaC
@SuperAWaC 5 жыл бұрын
trades are under-appreciated in general compared to things like programming which adds hardly any real value to society outside of a few uses of it
@skoronesa1
@skoronesa1 5 жыл бұрын
Under appreciated by who? I am pretty sure that machinists make a ton more than the other trades.
@modelrailroad6337
@modelrailroad6337 5 жыл бұрын
mechanics are way more under appreciated then machinists
@andrewbailey7999
@andrewbailey7999 3 жыл бұрын
I've said it before, but I really like how you don't speed up or skip past too much on this channel. It's pretty therapeutic watching the cut happen in real time and watching the chips drop down
@heijblomn
@heijblomn 4 жыл бұрын
Thank you so much for this video. I work at a milling/turning company in the Netherlands, we do mostly small precision work in the space and flight sector. Your videos are so humbling. the culture at my place of work is like the bigger the easier, i think your Channel proves the opposite. This one was the first of your videos i’ve seen, and you’re gained a sub! Keep up the amazing work!
@wyldfyre32286
@wyldfyre32286 4 жыл бұрын
Love watching that beautiful metal come to life from under that surface rust. Damn what a sight. Awesome work.
@youtubasoarus
@youtubasoarus 6 жыл бұрын
Anyone else find it super satisfying to watch that rust fly off with the chips to reveal a super shiny new metal underneath? Hell yeah. :D
@Abom79
@Abom79 6 жыл бұрын
+youtubasoarus I do!
@youtubasoarus
@youtubasoarus 6 жыл бұрын
Thanks for the reply brother! Awesome channel! Always a pleasure to watch those chips fly! :)
@brucekirk5386
@brucekirk5386 5 жыл бұрын
I fapped to that the entire time lol
@garyg5829
@garyg5829 5 жыл бұрын
youtubasoarus I have been a machinist for 47 years both cnc and manual. There is nothing like really removing metal fast with some serious horsepower
@user-zq6pj5jo8j
@user-zq6pj5jo8j 5 жыл бұрын
Yea, And the bright deep purple chips...Love the way they look.
@dbejmar
@dbejmar 6 жыл бұрын
Well done! I have seen almost all your videos. Big fan! keep it up like most tips and tricks. and heavy machining videos
@halilmisli9274
@halilmisli9274 5 жыл бұрын
hello I'm a manual lathe operator I've tried to turn more like this Cement and iron steel factories have processed spare parts. I congratulate you. Hand work for using lathes
@halilmisli9274
@halilmisli9274 5 жыл бұрын
Hi good luck I have a job in my business I want to work in your company I use fine lathes and processing precision parts
@redryderaus
@redryderaus 5 жыл бұрын
I never get tired of watching you work, Abom.
@adamlynch7005
@adamlynch7005 5 жыл бұрын
WOW, LOVE WATCHING PEOPLE WHO EXCELL AT THERE TRADE! Thank you for the knowledge.
@00Ibanezist00
@00Ibanezist00 6 жыл бұрын
Nice throwback to the original gearbox shaft videos with the shaft-cam whilst craning :D I've never machined anything in my life, but your videos are an absolute pleasure to watch, and I've been through near every sns so far haha. You're a brilliant machinist, and you really seem to have all your ducks in a line! Keep it up, and stay safe during this insane weather you're having!
@Abom79
@Abom79 6 жыл бұрын
+Pictometry This one is very similar to the first one so I'm trying to give some different info and views from before.
@00Ibanezist00
@00Ibanezist00 6 жыл бұрын
Abom79 I love it! I meant to say, I thought it was cool haha. Thanks for the reply, I'm a little star-struck to be honest! :D
@dougbush4170
@dougbush4170 6 жыл бұрын
Please thank your Boss for letting us into his shop.
@jimstamper7062
@jimstamper7062 6 жыл бұрын
I was going to say the exact same thing
@ScottPankhurst
@ScottPankhurst 6 жыл бұрын
seconded. and thirded.
@bigfutus
@bigfutus 6 жыл бұрын
Yeah, thanks boss 👍
@philiplogue8194
@philiplogue8194 6 жыл бұрын
Doug Bush
@Abom79
@Abom79 6 жыл бұрын
Thanks guys. I had talked the boss before the last two projects I have shown and they give me the ok. They don't want me doing it daily, but saving it for the bigger projects, maybe once a month or so.
@stephenrocks7004
@stephenrocks7004 4 жыл бұрын
I have been in construction for 48 years, so I know the pressures of perfection, and may all of you who are not in these fields, the sweat and blood, is more than any one can imagine. Hats off to you guys who have the courage to start and finish. Their can never be any mistakes, mistakes that could shut down the entire operation. my admiration for you guys can only be appreciated By the gallons of sweat to the compared to the tears. Sounds off, but as my grandfather would say, “ I know nothing of what you do” “ but a blind ground squirrel picks up a nut, or two along the way” I thank you for taking the time out to show us.
@onetwothree5787
@onetwothree5787 5 жыл бұрын
Great video thanks. I've been selling steel for 30 years and never really saw the process like this.
@user-hb8be5wb4q
@user-hb8be5wb4q 4 жыл бұрын
Now I know why 4 speed transmissions are so heavy. Great video, thanks for sharing. Now, only engineers would think of centering the material before turning the product. Ain’t that metal beautiful! Wow! At 75 I am still learning.
@samc5898
@samc5898 6 жыл бұрын
Always love the videos at your work, they never fail to entertain. I wish you luck with the incoming storm, stay safe.
@raibeartcahill4295
@raibeartcahill4295 5 жыл бұрын
Thank you very much for NOT putting some terrible "music" aka NOISE on your videos!! Actual machine sound is all the music they need!
@craigroedema5018
@craigroedema5018 2 жыл бұрын
Retired Journeyman Machist it's nice to see the old engine lathe still spinning and doing its job. Can't beat them. Good job.
@exposingthedarknesswiththe9190
@exposingthedarknesswiththe9190 5 жыл бұрын
*ONE OF AMERICA'S FINEST SKILLED LABOR FORCE, AS MACHINISTS!* *~ ONE AWESOME MACHINE SHOP!! ~* *NOT EVERYONE IS SUPPOSED TO GO TO COLLEGE, BUT WHAT THESE SKILLED TECHNICAL MACHINISTS AND WELDERS DO, FEW ARRIVE AT THIS LEVEL!*
@user-bi2jg8hl5s
@user-bi2jg8hl5s 4 жыл бұрын
Зато крым наш
@princeautocustoms
@princeautocustoms 5 жыл бұрын
Top machinist I respect your skills
@eloyex
@eloyex 5 жыл бұрын
YES, it is magic ...... Never ever have used a lathe, but looks amazing !!!!
@MrKabDrivr
@MrKabDrivr 3 жыл бұрын
I'm wondering why would anyone come here to watch Abom's channel and put a dislike on it... I mean: you come to watch a machinist do his thing and Abom obliges and does his thing like the pro that he is... What's there not to like? OK you can be not interested (in which case, why are you even here?) but why the dislike? Anyhoot... I like your vids, Adam. Well made, informative, interesting. Thanks for sharing them with us.
@noneyourbusines6738
@noneyourbusines6738 4 жыл бұрын
Awesome to see your work I did the opportunity to be around thr machinist in shipyard when I were working at the hull repair and is awesome to see the shaft does come to you guys and you guys make become so shine and clean it give tears to my eyes sometimes.. and it's been 10 years that I dont work on the shipyard thank you all machinist to make my shipyard keep working and my boats floating
@1986yamahafazer69
@1986yamahafazer69 4 жыл бұрын
This is just amazing to me! I am a journeyman mason, and the smallest measurement we usually get down to is 1/8th of an inch. Lol! Your good!
@Stubones999
@Stubones999 5 жыл бұрын
Sometimes, I can smell the cutting oil when it smokes... Thanks for sharing these videos!
@itz_beavis7674
@itz_beavis7674 4 жыл бұрын
Awe that just brought a nice memory to mind. Thanks
@bradleygarlak8283
@bradleygarlak8283 4 жыл бұрын
I know this is an old post but reading this made me smell it lol
@subashshukla1350
@subashshukla1350 3 жыл бұрын
@@itz_beavis7674xx. Xx. Xx. Xx. ,. , Xx xx xx
@ACELog
@ACELog 3 жыл бұрын
Same here! Can still remember how it smelt all those years back, as an apprentice in the early 1970's
@Parents_of_Twins
@Parents_of_Twins 3 жыл бұрын
I got in an argument with a KZfaqr about manual versus CNC machines. He was adamant that CNC was better in every way and I was saying that a good machinist could equal the quality of a CNC with manual machines. It is very gratifying to see you proving my point on stuff 5-10 bigger than what we were talking about.
@jongerber3476
@jongerber3476 4 жыл бұрын
That gearbox sure sounds good. Nice vids you are doing. Thanks for keeping a trade alive. Old school. That's the way I learned. 30 years and finally disabled. Concrete and lifting too much finally took its toll .
@ericnickel3280
@ericnickel3280 6 жыл бұрын
Very few people can appreciate or enjoy the sound of chips being cut off a piece of material like we do.
@ChristopherPowell7
@ChristopherPowell7 5 жыл бұрын
That’s one of the most amazing things I’ve seen
@Alltakenbla
@Alltakenbla 4 жыл бұрын
Posted 2017 for my viewing pleasure here in May 2020 - The year of lockdown in South Africa. Thank you Abom79. I am an amateur carpenter and love all kinds of wood. But there is a world in weight to be said for this kind of metal work. Beautiful. Thanks!!!
@kathleenwhite9741
@kathleenwhite9741 3 жыл бұрын
Trenton and Heath said to check out your channel. Had fun watching you and your craft! I don't know much about metal working but love watching people at their craft!
@yosmith1
@yosmith1 6 жыл бұрын
You're editing is getting so refined Adam. Always enjoyable to watch Thanks for sharing
@sureshjoseph4209
@sureshjoseph4209 6 жыл бұрын
Neil Smith pop LP no LMP MN
@bucheron87
@bucheron87 6 жыл бұрын
The crack in the old shaft is freaking impressive! Careful with that hurricane, buddy!
@wildturkey5838
@wildturkey5838 6 жыл бұрын
It made me wonder why they don't put a radius in that cut -- this can't be the first time that's happened.
@noneyourbusines6738
@noneyourbusines6738 4 жыл бұрын
That's what happened when your propellers hit something in the water.. that keeps my crew working.. you know the job security, you pay we ship to you
@peterredman235
@peterredman235 3 жыл бұрын
How refreshing to hear someone admit to a measuring (temporary!!) mistake!. Also very much enjoy your articulate commentary on what you are doing and why. Excellent! Many thanks.
@ericf5996
@ericf5996 3 жыл бұрын
This reminded me of my experiences machining steam turbine shafts, up 35' long, in the 90's. Love watching your videos.
@wudwshapr
@wudwshapr 6 жыл бұрын
Adam, my Father had a business where he sold inserts to the auto companies in Detroit, I used to flip through the manuals but it never really grabbed my attention at the time. I watch your videos and it seems I understand how you lay it all out and it is fascinating. Thanks for the entertainment, it is really interesting to watch how these parts are made.
@aserta
@aserta 6 жыл бұрын
Adam is a really good teacher.
@Summer-it3wh
@Summer-it3wh 5 жыл бұрын
Seeing you adjusting the chuck to zero out the gauge is basically like watching someone do a rubiks cube. I can't see any pattern but you obviously can.
@brennanlamparek7697
@brennanlamparek7697 4 жыл бұрын
Tighten the highs, Loosen the lows. The indicator tells you everything. Rubik’s cubes are a lot harder
@kevinwalton4538
@kevinwalton4538 4 жыл бұрын
Summer Why would you would use a DTI to true black bar?? Pencil is all that’s required. Biggest job I turned weighed 20 tons and was 15 ft dia. Heavy machinist for too many years to mention. Oh and coolant would give much longer tool life although I see why you wouldn’t use it to video. Stay lucky!
@Jordan-xm4ko
@Jordan-xm4ko 4 жыл бұрын
@@kevinwalton4538 20 tons is nothing xD
@connor5147
@connor5147 4 жыл бұрын
Namrise haha exactly, here at Sheffield forgemasters we have the ability to cast over 500 tons in a single pour. The VBMs and lathes probably wouldn’t be able to handle that weight so it’s up to the millers to machine it. At the moment I’m working on a VBM with a 20ft diameter chuck and I can take 10mm DOC. I find it hilarious watching the small CNC machines running at 2000 rpm whilst I’m sat here spinning up to a maximum of 10.5 revs 😂
@foxjerseycol4433
@foxjerseycol4433 4 жыл бұрын
@@kevinwalton4538 a bit like the Coolent that is being used in this video ? Skip to the end mate !
@scotsmanofnewengland7713
@scotsmanofnewengland7713 3 жыл бұрын
Explaining as you go along would help some of the viewers understand the steps like when you have to find center and centering. Former trade school graduate of machine shop. Thanks for the memories.
@papalilburn
@papalilburn 4 жыл бұрын
Only a former machinist can really appreciate watching the metal chips fall away! I'm a former machinist for the National Supply Company in Gainesville, Texas where we made National Oil Field Pumps (big, big parts!). Excellent video!
@spamboli
@spamboli 5 жыл бұрын
Wow! i'm used to seeing hobbyist machinists, but industrial shops don't mess around: .400" depth of cut is no joke
@robnorth7638
@robnorth7638 3 жыл бұрын
Exactly, and in Industry the vast majority of machinists will have mountains of work like this coming at them, all required asap, plus foremen and managers breathing down their necks...
@adamantprize12
@adamantprize12 6 жыл бұрын
Even if im european and speak in metric, i allways look forward to watching your videos, theyre just satisfying to watch. Maybe its that smooth operator or that chip? i dont know. I wish you the best of luck, i know the news about the hurricane has been everywhere on the internet but i genuinely hope you make more videos in the future
@BedsitBob
@BedsitBob 6 жыл бұрын
I'm European (English to be exact), but I work in imperial.
@David-xl8zf
@David-xl8zf 6 жыл бұрын
It´s probably big toys for big boys. ;) I´m trying to learn the imperial system too. Although the agreement of international like technical things is metric I´m getting some customers still sending in blueprints or orders with imperial, since my cnc lathe speaks both it´s no problem I´m just not used to calculating stuff in imperial, kinda odd for someone who learned on metric but eh. I got to speaking english pretty well so I´ll get on speaking imperial aswell.
@YaksAttack
@YaksAttack 6 жыл бұрын
Da vid it's easier when you grew up in America and used imperial for your whole life. Just know that 25.4mm is an inch, 12 inches is a foot, 3 feet is a yard, 5280 feet is a mile. That's most of your conversions for distance.
@dtiydr
@dtiydr 6 жыл бұрын
And you will join the rest of the metric world someday for all the benefits there are.
@David-xl8zf
@David-xl8zf 6 жыл бұрын
YaksAttak, I know. It´s just more convenient to deal with all the numbers 1/4 inch is like 6.35mm and then you add tolerances in like thousands or tenths it just kinda gets out of hand and takes up more time converting than actually making the part. Even if I had CAD data from like Solid Works it would take me at least an hour to make up a blueprint that made sense to someone who´s only familiar with metric. Let´s say I´m just having this idea about moving to the US and start working and living there and someone walks into the shop and says "I need like a quarter inch diameter of steel one and some sixteenths long" and I just go and grab a calculator to figure out that stuff in metric. I just wanna go grab a piece of steel and hand it to them, like I can do with metric stuff. Also I wanna find out for myself which system is more convenient in ease of use, my experience is only based on metric which of course I´ll find easier to use just because that´s the only thing I´ve been using this far.
@normantran7640
@normantran7640 4 жыл бұрын
I can't believe I sit through the whole video. And the results is satisfying.
@yukon4511
@yukon4511 3 жыл бұрын
I really enjoy watching you adjust the 4 jaw. True artistry.
@spalkin
@spalkin 5 жыл бұрын
You'd drive by that building and never know what cool shit was happening in there.
@franciscorafael7975
@franciscorafael7975 5 жыл бұрын
Maravilloso trabajo,,, Hace muchas lunas yo era estorbante de TORNERO,, ((ES UN TRABAJO DE ARTESANOS.))
@dj6769
@dj6769 5 жыл бұрын
I’ve been a mechanic 40+ years I enjoy working with my hands building things from wood metal stone ect. Watching you make a precision machine shaft was very interesting. I’ve dabbled with very small lathes in various shops the way you trued and centered the chucked end told me if your lathe doesn’t have this setup you can’t do precision work. Enjoyed watching someone with such talent great work!
@godfamilycountry4211
@godfamilycountry4211 3 жыл бұрын
Brings back memories as fourteen years old working around the work shop. Thx
@renardchenapan
@renardchenapan 6 жыл бұрын
i saw the shaft, now i definitely want to see the gearbox :)
@BlackEpyon
@BlackEpyon 6 жыл бұрын
I'm just curious as to what the hell happened to the OLD shaft!
@mspeir
@mspeir 6 жыл бұрын
^^^This!
@Realtime1501
@Realtime1501 6 жыл бұрын
renard chenapan should be kinda small
@Realtime1501
@Realtime1501 6 жыл бұрын
BlackEpyon usually cracking on keyways or radia
@BlackEpyon
@BlackEpyon 6 жыл бұрын
I only wonder as an amateur mechanic myself. I run a landscaping business, and save quite a lot of money servicing my own equipment. Mostly single cylinder engines. This year, I've had to replace one engine, and rebuild another due to employees not paying attention and running over things (like the bolts at the base of a lamp post, for instance), both of which resulted in a bent crankshaft. Fortunately, I had an engine from an older mower that needed too many parts to make relaible, but had the same engine (Fujikawa FJ180V Kai, which is apparently quite popular). And another with the same engine that had a broken connecting rod from which I was able to salvage the shaft. Not nearly as costly as it could have been.
@victormcqueen2715
@victormcqueen2715 6 жыл бұрын
Adam. Another great video. But I worry about you . . . Pretty big storm coming your way. I know you are further up but even the panhandle will get some rough weather. Hunker down brother.
@Abom79
@Abom79 6 жыл бұрын
My area of the panhandle is not under a hurricane watch. Looks like Pensacola will be spared the worst of the storm.
@sanho1988
@sanho1988 6 жыл бұрын
it needs to be hell of a storm to blow out Abom lol
@keithka
@keithka 6 жыл бұрын
Category 5 isn't as strong as Abom torque.
@AdventuresinFabrication
@AdventuresinFabrication 6 жыл бұрын
The rain can still get you, I'm in Houston, be safe
@raymondclark1458
@raymondclark1458 6 жыл бұрын
A
@kickstart63
@kickstart63 3 жыл бұрын
As a home shop machinist, I can testify that Abom is a truly artist in every sense of the word!
@hammer-fn7gm
@hammer-fn7gm 4 жыл бұрын
I worked in an R&D shop for about ten years. I had to design, make, modify, assembly parts, and demonstrate the finished machine for customers. Very challenging work, but very satisfying when the customer was presented with exactly what they were wanting.
@Godshole
@Godshole 6 жыл бұрын
In my best Clause Kellerman voice.... " I'd like to see Keith straighten THAT!" 14 mins...... Nice job Adam :)
@mateimim
@mateimim 4 жыл бұрын
Music a due petrecere
@jimwhitehead2313
@jimwhitehead2313 4 жыл бұрын
Great series! Thanks
@aristakas5893
@aristakas5893 6 жыл бұрын
Magnificent!! Loved the piggy-back ride on the gearbox shaft as you rotated it, starting at 20:08 and stepping through, frame by frame to the remount at 20:58! Great view of the workshop layout, and of the old shaft?? at the far end of the lathe bed. Thank you Sir, John Greenwood
@Abom79
@Abom79 6 жыл бұрын
+Aristakas Yea I did that a few times before and the viewers really enjoyed it. 👍🏻
@codprawn
@codprawn 2 жыл бұрын
I love watching your old videos. I have a Colchester Triumph 15" swing lathe. Built in 1964. Been fine tuning it and she is cutting a test bar within half a tenth. Remarkable so proud of the old girl!
@pacificcoastpiper3949
@pacificcoastpiper3949 2 жыл бұрын
Cutting to half of.0001 inch??!!!! 😮
@scottmartin3344
@scottmartin3344 5 жыл бұрын
Very nice, I’m a Tool & Die Maker. I never make anything that you can’t hold in one hand, nice to see something large being made. Most blissfully unaware people don’t realize that almost everything that is manufactured today, at some point takes a Machinist or a Tool Maker to make any product a reality! Automotive, Medical Devices, Food, Energy, Defense, Aerospace, Construction, and many more industries all depend heavily on Machinists and Tool Makers. We are by far the most highly skilled workers in manufacturing, and we are among the most unappreciated and underpaid professionals in the job market today!
@turbocobra
@turbocobra 6 жыл бұрын
Awesome video. Hey, i know you have mentioned in a few different videos about your dad selling some of the equipment to Motion, but maybe a good vlog topic would be to give us a full run down on the history of the machine shop and when and how it came about that he sold some of it to Motion and how you came to work there? Stay safe sir.
@Abom79
@Abom79 6 жыл бұрын
+Ramsey Customs - turbocobra Hey Gary, I have touched on that in a couple past videos. I think my intro to the shop video I talked about it, and I believe talked a little more in SNS 100. I'll have to go back and see. If not I'll plan it for a later video.
@turbocobra
@turbocobra 6 жыл бұрын
Right I have heard you mention it in a few videos, but don't think i have heard the full story, if you did i missed it. It's just a thought.
@andrewterry8092
@andrewterry8092 6 жыл бұрын
I would love to see a video on the full story, I know you've touched on it before but a dedicated video would be great. Thanks again.
@brunomezadri
@brunomezadri 6 жыл бұрын
indeed the full story is in SNS number 100, part 1 and 2. it is a very interesting footage, with nice old pics of mr. Adam and family (=
@Abom79
@Abom79 6 жыл бұрын
I myself don't even remember how much detail I had in that episode. I'll check it out and see. I'll keep an episode in mind for your requests Gary.
@thetroof5525
@thetroof5525 4 жыл бұрын
24:58-26:35 Best minute and thirty seven seconds of my day.
@josesaldivar655
@josesaldivar655 3 жыл бұрын
Greetings ftom Mex .good machining
@kosovorot
@kosovorot 5 жыл бұрын
That is so satisfying to see a professional at work.
@HonoluluTita
@HonoluluTita 4 жыл бұрын
This knowledge of working metals is much more important and useful than a college degree. I am amazed how you do all this. We need more people like you!
@loftsatsympaticodotc
@loftsatsympaticodotc 2 жыл бұрын
Well Honolulu, with no college degree, I can assure you, NEITHER the lathe, the round bar of steel NOR the 4140 Alloy would exist! Nor for that matter your computer or smart phone on which you are watching this video. It always pissed me off, when in 50 years of providing and operating industrial machines one bozo on our staff saw me with a wrench in my hand, and said- "About time you do some real work/" ... but we digress.
@noxious89123
@noxious89123 5 жыл бұрын
First video of yours that I've seen, and it absolutely hypnotising! I'm curious though, isn't the heat bad for the tools? Quite surprised to see them smoking and the pretty purple / blue discolouration. Don't they want lubrication and cooling?
9.5 Inch 4140 Gearbox Shaft Part 2
28:51
Abom79
Рет қаралды 1,3 МЛН
9 5 Inch 4140 Gearbox Shaft Part 3
32:45
Abom79
Рет қаралды 1 МЛН
狼来了的故事你们听过吗?#天使 #小丑 #超人不会飞
00:42
超人不会飞
Рет қаралды 59 МЛН
[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr
01:00
是曼玉不是鳗鱼
Рет қаралды 49 МЛН
Chips evolution !! 😔😔
00:23
Tibo InShape
Рет қаралды 42 МЛН
Broken & Siezed Bolt Removal, DR 650 Cylinder Head
36:56
Abom79
Рет қаралды 1,3 МЛН
I make an ''8 Ball'' out of solid Stainless Steel and Brass
8:19
my mechanics
Рет қаралды 40 МЛН
Machining out SEIZED Head Gland | CAT 785 Dump Truck Cylinder
25:50
Cutting Edge Engineering Australia
Рет қаралды 1,1 МЛН
Lathe Spindle Pulley Repair
1:01:01
Abom79
Рет қаралды 258 М.
Sawmill Drive Roller | Machining & Broaching
45:30
Cutting Edge Engineering Australia
Рет қаралды 2,8 МЛН
Custom Dies for Rolling Machine
1:08:24
Abom79
Рет қаралды 165 М.
Fixing a Broken Tooth & Spreader Front Axle | Engels Coach Shop
17:53
EngelsCoachShop
Рет қаралды 114 М.
Эволюция телефонов!
0:30
ТРЕНДИ ШОРТС
Рет қаралды 6 МЛН
📱 SAMSUNG, ЧТО С ЛИЦОМ? 🤡
0:46
Яблочный Маньяк
Рет қаралды 1,7 МЛН
Carregando telefone com carregador cortado
1:01
Andcarli
Рет қаралды 2 МЛН
AMD больше не конкурент для Intel
0:57
ITMania - Сборка ПК
Рет қаралды 511 М.
Huawei который почти как iPhone
0:53
Romancev768
Рет қаралды 581 М.
как спасти усилитель?
0:35
KS Customs
Рет қаралды 514 М.