9 - How To Setup & Use Mero/Chairgun Correctly on Desktop & Smartphone

Рет қаралды 5,952

Күн бұрын

Here I demonstrate the correct way to setup ballistic software like Mero and Chairgun on your desktop or smartphone to determine aim points and create a range card. This is includes the POI @ target method for determining the ballistic coefficient (BC) of your pellets, and the Tin Foil Method for measuring the correct sight height for your rifle.
Buy me a coffee to support the channel.
www.buymeacoffee.com/hftshooterC
#airgun #airguns #airgunshooting #airrifles #airrifleshooting

Пікірлер: 47

@stephenhayes2996 11 ай бұрын

Thanks that was so informative, and explained in an easy to follow manner all you videos are a mine of information. Thanks for taking the time post, keep them coming !

@hftshooter 11 ай бұрын

Glad it was helpful!

@SedEdwards 10 ай бұрын

Thanks very much, this have help me loads. I've only been shooting HFT for a few weeks. A club member said to use chairgun but it wouldn't work on my phone and you said use mero which I've just put the app on my phone and it's amazing. Once again thank you

@hftshooter 10 ай бұрын

Glad it helped. 😀👍

@drleighmj 10 ай бұрын

I was hooked. Very well explained and I appreciate your efforts in putting this together.

@hftshooter 10 ай бұрын

Glad it was helpful! 🙂👍

@jamescarter1088 2 ай бұрын

Thanks for the video. You have completely de mystified the instructions👍🏻

@hftshooter 2 ай бұрын

You're welcome! 😀👍

@pjgtech Жыл бұрын

Good video, keep them coming. I have learnt something today as well, that is a very useful formula to work out scope height, I already knew the tinfoil method, but looks like the formula is close enough to use as well, so thanx for that, cheers.

@hftshooter Жыл бұрын

You're welcome 🙂👍

@pietlombaert6696 7 ай бұрын

Thank you for this great series of instructional videos. Could I ask if there is any practical benefit to have a chronograph that can measure the projectile speed at the target instead of just at the muzzle?

@hftshooter 7 ай бұрын

Thanks! Not in terms of a single chrono I think. If you had two chronos, one measuring muzzle velocity and one measuring velocity at target for each shot, then you could calculate an accurate ballistic coefficient for your pellets.

@redauwg911 Жыл бұрын

thank you good video👍

@hftshooter Жыл бұрын

Welcome 👍

@gigolocan8914 10 ай бұрын

Im using chairgun elite it is being updated regulary in fact it just got a new update a month or so ago. In my opinion it’s the best ballistic calc out there, it’s similar to strelok which i also own but chairgun just looks and feel better. This is on IOS (iphone) I have no idea if it’s available on any other platforms.

@hftshooter 10 ай бұрын

Glad to hear you've found something that suits you personally. There are lots of options available. I like Mero as it's primarily for airguns.

@malcolmhaigh3452 12 күн бұрын

Hi, I think I saw you at the recent BRK day! Thanks for the good tip regarding scope height. Do you do this after you have zeroed the scope, or when the reticle is optically centred? Thanks.

@hftshooter 12 күн бұрын

Hi Malcolm, if you're doing the tin foil test then probably best to do it after you've zeroed your scope. 👍

@malcolmhaigh3452 12 күн бұрын

Thanks!

@mattbeumer5274 4 ай бұрын

Great information. Hopefully you can answer a question for me. I am zeroed at 50 yards, shot a 100 yards and Mero calculations were way high. I adjusted to hit my target. I then changed my scope height setting from 2.66 inches to 5.50 inches to get hold over correct. Am I doing something wrong or is this normal to adjust scope height setting? Should I be changing another setting? If you have time, I would greatly appreciate your input. THX--Matt

@hftshooter 4 ай бұрын

Hi Matt, as I understand it the crucial settings are scope height and ballistic coefficient. I would recommend using the tin foil method to find your exact scope height at the muzzle and measure your pellet drop at a set distance to determine a more accurate BC if you're using manufacturer figures. I'm zeroed at 25 yards and measure pellet drop at 50 yards. It sounds like you can shoot to 100 yards with your 50 yard zero so I would measure at 100 yards and use the Mero tool to work out your BC. Once you put the figures in Mero will match your results at 100 yards and calculate backwards for shorter ranges which should be closer to what you're experiencing. However, at the end of the day shooting on paper at different ranges is always going to give you the most accurate drops and aim points for your rifle. Hope that helps.

@mattbeumer5274 4 ай бұрын

@@hftshooter Thank you for your response. I will give that a try. Much appreciated.--Matt

@michaelr1971 11 ай бұрын

Great video, thank you, Iv'e had a look at downloading MERO V1.9.0 on my Windows 11 machine however my antivirus and windows is suggesting it's an unsafe program to run?! any thoughts on this, thank you.

@hftshooter 11 ай бұрын

Hi Michael, sometimes Windows can be a bit over-protective with installs. In this case it just doesn't recognise the software creator. If you click on the 'More info' link in the blue box a 'Run anyway' button will appear. I've used this program on a Win 10/11 PC for a long time without issue so it will be safe on your system. hope that helps.

@michaelr1971 11 ай бұрын

@@hftshooter Thank you, I am aware that PC's can be a bit over protective sometimes, I'll give it a go 👍. Keep up the good work, your channel is super informative, really helpful to those like me, new to the sport 🙂

@hftshooter 11 ай бұрын

Glad to be of service!

@iamspartacus8219 7 ай бұрын

Need to ask you a question, with the furthest target at 45 yd’s in HFT, why did you do a pellet drop measurement at 50 yd’s?

@hftshooter 7 ай бұрын

As I understand it, you get a more accurate ballistic coefficient calculation at 2x your zero range or more.

@martinsprout846 3 ай бұрын

Another question, for you’re HFT comps with your springer, do you use one of the computer programs or real life shooting to achieve your best range cards?

@hftshooter 3 ай бұрын

I primarily use a paper target set at different ranges Martin. Check out my video number 8.

@martinsprout846 3 ай бұрын

Again thanks. To be honest that was the approach I was going to take. I’m thinking the computer model approach is a bit general, nothing like using how your rifle, pellet work in the real world. PS Thanks for all the content you post, they are very informative, interesting and much appreciated for those of us just starting out in HFT.

@fxpeter22 Ай бұрын

Hi Jeff, brilliant piece of work which must have taken ages to put together, I am learning all the time. Not sure about the tin foil method, seems like a very "iffy" way of getting an accurate measurement. How did you discover that a simple mechanical measurement of the scope/barrel was incorrect? Using basic trigonometry, based on a 25 yard zero and a 45mm scope hight (hate mixing units) at the objective (Scope diameter + barrel diameter /2) + gap between top of barrel and bottom of scope) if the barrel sticks out 400mm beyond the scope then the difference in the trajectory lines would be 0.692mm which is nowhere near 5% and is within acceptable error. This is not criticism, just debate to find the best solutions 🙂

@hftshooter Ай бұрын

The tin foil method is in no way iffy. Measuring at the muzzle is the most accurate figure. That's where the ballistics start. I learnt this from a respected source who's info I trust.

@fxpeter22 Ай бұрын

@@hftshooter Please don't be offended. I am just trying to debate the method. Just stating it is right without any background doesn't work for me. Calculating is as near absolute as you will get with known dimensions. You didn't measure at the muzzel. You measured at an unstated dimention from the muzzel to the cardboard, you also hand held the rifle which could also lead to deviations and you measured to an estimated centre of the pellet hole. We are talking about small dimentions so very little room for error. If you would prefer that I didn't comment on your content just say and that will be that.

@jeffmccall8013 Ай бұрын

@@fxpeter22 I'm not offended at all, please don't think that. I welcome all comments and questions. I'm not an expert and am just passing on this stuff as I learn it myself. I'm happy to be proved wrong at any time if I've picked up bad information. Unfortunately it's very easy to get misconstrued in a messaging app. If you check out my video number 45 from about 16:30 I cover the tin foil method in more detail. You should see that the muzzle is touching the paper target when I take the shot. I have read some compelling articles promoting this method and have also noted graphics in some ballistic apps that clearly show that sight height is measured at the muzzle for ballistic calculations. Still happy to be proved wrong if that's not the case and I would happily broadcast a correction from the channel. I encourage you to continue to challenge everything to get to the truth; a mantra to live by! Best wishes, Jeff.

@fxpeter22 Ай бұрын

@@jeffmccall8013 That is great. I will get back to you 🙂

@rivit90 7 ай бұрын

getting your sight height , do the scope turrets need to be centered ???

@hftshooter 7 ай бұрын

No, the scope turrets do not affect sight height.

@rivit90 6 ай бұрын

So it shouldn't make any difference if your using your scope crosshairs and the turrets are turned to maximum elevation or minimum elevation??

@jeffmccall8013 6 ай бұрын

@@rivit90 not as far as sight height is concerned. However, if you find yourself at turret limits there may be something wrong with your scope mounting?