This is it! After months of anticipation, all the minor & major details, all the missing parts finally in place, my 91 Honda Accord finally has its new JDM H23A engine in! Hope you enjoy and watch f
Пікірлер: 59
@winstonbuzon10 жыл бұрын
Yes, I kept the mount itself, but the engine bracket had to come from a 92-95 H22A Black Top VTEC. Thanks for the compliment and good luck to you and your swap too!
@SmokinMayhem16 жыл бұрын
Winston Buzon brother need some help I'm trying to do swap as we speak and the driver side mount don't match the mount fits the bracket on my cb7 motor but not on my Euro r
@michaelhodges4529 жыл бұрын
This brings back memories but I been did this while back with the crankpully on by myself with no help
@cesarcardiel29855 жыл бұрын
Have u try doing a. Auto sawp h22a on a 91 prelude
@sureshot68498 жыл бұрын
Thanks a lot Winston you're the best
@winstonbuzon8 жыл бұрын
You're welcome :)
@jlgtapout7 жыл бұрын
Winston Buzon all i seen was your back
@winstonbuzon10 жыл бұрын
I got mine from Ricky's Automotive. It's featured on one of my other videos. The info is on there too. If you can find one local to you, even better. That way, you can look at the motor before buying it like I did, which is why I chose to go local. Make sure to have a downpipe also before you buy an engine.
@winstonbuzon10 жыл бұрын
Maybe in a week. I will be doing a bit of breaking in the clutch during my road trip. I'll post vids about that too
@jay-arejefferson923810 жыл бұрын
What are you using to secure the engine to the hoist? looks a lot better that just trying to find a bolt hole.
@winstonbuzon10 жыл бұрын
There's a hook on the head specifically designed for lifting engines. The other part is an available unused screw and bolt
@TerranceSTL8 жыл бұрын
Thanks alot for your help
@winstonbuzon8 жыл бұрын
You're welcome. :)
@skillz185510 жыл бұрын
Mad props for the drop in install,, I do the manuals from the bottom, so much easier,, but keep CB7s going strong,,I absolutely love mine, good stuff here,, is the road test and dyno coming
@deebrad354610 жыл бұрын
If you dont mind. What computer and engine wiring did you use?
@winstonbuzon10 жыл бұрын
PCB ECU and an OBD2A to OBD1 Jumper Harness. The stock harness had to be modified for extra sensors.
@jdmcb7coupe10 жыл бұрын
Hey winston . As stated ina a previous comment I'm doing this swap currently and I'm curious did you change your drivers side timing motor mount bracket ? . And is that a oem motor mount ? . I'm haven trouble if it is necessary to spend more money that I don't need to spend . Thanks . Btw looks right at home man love it
@juandelgado49234 жыл бұрын
Hey man I wanna do a H23a swap on a 1992 Honda Accord 2.2l cb7 and I got couple of questions
@jlgtapout7 жыл бұрын
what exactly are you showing us here your back
@JarrettLauderdale10 жыл бұрын
The bracket doesn't have to be a VTEC Prelude. Any H23A1 or H22A '92-'96 Prelude.
@chinc09110 жыл бұрын
Was there any mods u had to do or does it line up perfectly
@winstonbuzon10 жыл бұрын
Lines up perfectly if using stock mounts
@Woody-fv7uu9 жыл бұрын
Winston live the videos brother. I've got a 93 accord I plan on doing an engine swap on. In throttle here it says jdm h22a/h23a did you use the entire engine of just one or combine the two? The reason I ask. I've been researching and I'm trying to chose between the h22 and h23. In the research I've found someone said you could use the h22 head of the vtec and then the block of a h23 block. Said gives you th hp of the vtec and the torque from the non. Idk truths to it but wondered if you knew. Then if you just used the h23 like I sorta think you did. What made you chose it over the h22? Sorry I wrote you a book man. Thanks for your time brother. Hope to see more videos.
@winstonbuzon9 жыл бұрын
Don't feel bad that you wrote me the greatest novel ever asked, lol. Well, what you're talking about is what I refer to as a frankestein build. Unfortunately, this is a question that I cannot answer due to the fact that I've never dont such a swap. I've only gone as far as doing an LS VTEC swap, but that was over a decade ago. More videos to come soon and possibly even a project if I have enough support from my fellow subscribers. If there was a faster way to fund this project, I would be on it ASAP....
@Woody-fv7uu9 жыл бұрын
I start tech school next month maybe by the time I get out I'll be able to put the beast together. Lol I'll post videos of it to. I'm really excited to get school going be able to start a career I'm passionate about. Winston peace out brother and have a happy holiday season.
@winstonbuzon9 жыл бұрын
Happy Holidays to you, too! Good luck with tech school and your project!
@J1wil2310 жыл бұрын
Hey I'm doing a swap from a f22a1 to a f23a1. I got the engine out of automatic 99 Acura cl and I'm putting it in a manual 1991 Honda accord dx. What do I need for this swap
@winstonbuzon10 жыл бұрын
99? I know for a fact you'll need to re-wire for OBD2 to OBD1. Not too familiar for that swap, but definitely wirework. Everything else should fit right in...Axles, Tranny, etc. But don't take my word for it. I would highly recommend CB7tuner.com and search the forums. Also, the rear motor mount may be different too...
@J1wil2310 жыл бұрын
When you say rewire do you mean the whole dash?
@winstonbuzon10 жыл бұрын
No, just to convert the OBD2 engine & ECU to work fine with the OBD1 the CB7 originally is. My engine came from a 98-01 Accord Euro R which was OBD2A, but with re-configuration of wiring anda jumper harness, my newer engine works perfectly with my ol' CB7...
Winston Buzon hey i own a CB7, the thing is its an auto and i want to convert it to manual., you think its hard to do or an easy job?
@winstonbuzon7 жыл бұрын
Itz Chaparr0 Definitely not easy if you don't have the right tools, parts, and knowledge to do so. Mine came naturally manual
@julianpadilla600410 жыл бұрын
Whats going on winston. I had a question for you, ive got a 92 accord ex with the f22a6 engine. I just bought an h22a1 engine which is obd1 like my car. I bought it complete with long block, transmission and ecu and all wiring. Im a little confused about the ecu. Do I put the h22 ecu in or do I keep the f22a6 ecu and just rewire the vtec? Ive read way too many posts on this and cant find the right answer. I highly appreciate any help at all. Thanks
@winstonbuzon10 жыл бұрын
Sorry, Julian. I dunno how much I can help, but the ECU I used is the ECU that came with my swap, the PCB. Yours is a P72 I believe, so if your CB7 isn't VTEC from the factory, then you may have to add wiring for the different sensors you'll need for your new swap. If you go to cb7tuner.com and search for a member named "starkrice", he may be able to help you better since he did my wiring
@kendricksummers65110 жыл бұрын
What makes honda shake alot when speed up to 130mph
@winstonbuzon10 жыл бұрын
Usually bad alignment. Check your tires for bumps, check to see if your wheel bearings are good or not. Bad motors mounts are also good to check. Definitely needs addressing since you could lose a tire during travel
@underground2jz9 жыл бұрын
2 years later, how is it the car??
@winstonbuzon9 жыл бұрын
More videos to come soon, I promise ;)
@underground2jz9 жыл бұрын
Sweet looking forward to it
@oldscutlass198810 жыл бұрын
my first h23a1 swap i did completly wrong im gonna find me another h23a motor in a couple weeks so i can get my baby back on the road about how long did it take you from the time you dropped the engine in to the time you pulled away in the car to get the swap finished
@winstonbuzon10 жыл бұрын
It was a struggle. I had to get my finances straight DURING the process because little things (non-auto related issues) kept popping up. But if you are able to get EVERYTHING in line before you do the swap & depending on how many people are helping you do the swap, no more than a weekend. And that's includes the tuning.
@oldscutlass198810 жыл бұрын
i know EXACTLY what you mean im a father of 3 and everything that can happen will happen
@nickrhoads31239 жыл бұрын
Looking to do the h22 swap what do I need to do to make sure it is going to start
@winstonbuzon9 жыл бұрын
Nick Rhoads www.cb7tuner.com/vbb/showthread.php?t=126672&highlight=motor+swap
@josephcardona85737 жыл бұрын
add put a h22a in my 94 accord coupe but my rpm wont rev pass 5k why is that
@bryanbest73106 жыл бұрын
Hey man, I️ have a 1990 Honda Accord and want to swap it for an H. Where did you get your H from ?
@sureshot68498 жыл бұрын
Hey Winston I have a little problem maybe you can help me I have the same engine same car as well but the Driver side mounts won't fit what did you do to make yours fit Hollaback at me
@winstonbuzon8 жыл бұрын
I went to cb7tuner.com and searched for "H22A swap." It gave me a list of parts I needed, including which specific mounts I needed.
@TerranceSTL8 жыл бұрын
I have a question. is it possible to put a J35a in a CB7 coupe
@winstonbuzon8 жыл бұрын
Its definitely possible. I've seen it done but don't know how. Sounds really cool to do...
@TerranceSTL8 жыл бұрын
Do you know anybody could do my wiring harness for me i got the motor and wiring and Ecu and key
@winstonbuzon8 жыл бұрын
+Terrance Aldridge I found my help from cb7tuner.com
@moyzesg21868 жыл бұрын
I have a 97 accord lx. what engine can I swap?
@winstonbuzon8 жыл бұрын
This engine came from an Accord Euro R, so itd be a great candidate