920B Post-State Explanation | VEX Over Under
Рет қаралды 2,820
5 ай бұрын**climber is 16.5w total - misspoke
@Cill1028A 5 ай бұрын
Bluetooth intake is crazy would recommend 🔥
@VSPuzzler 5 ай бұрын
cracked
@920B 5 ай бұрын
We love 39K ❤ GL at open
@VSPuzzler 5 ай бұрын
@@920Bthanks see you at worlds!
@mks6869 5 ай бұрын
W explanation-49637A
@920B 5 ай бұрын
W alliance partner
@SynthwaveRobotics 5 ай бұрын
Where did you get those wire sleeves, is there a certain size to get for V5 wires, if so, what size?
@920B 5 ай бұрын
These are the sleeves we used. Make sure to get the 0.375 size I believe. www.amazon.com/PET-Expandable-Braided-Sleeving-Yellow/dp/B01919EOR0?th=1
@Unofficialbao 5 ай бұрын
oh wait btw 22111A here tested lifting 3rd wheel made barrier crossing much better but no drift after lifiting
@Unofficialbao 5 ай бұрын
515r is correct
@Unofficialbao 5 ай бұрын
Wait how does ur cg works with everything in the back
@Chris920B 5 ай бұрын
Intake up front. The further our your intake is and the heavier it is the more it counteracts the weight in the back.
@z-powered-nathan 5 ай бұрын
Rank 1, skills, and design but no excellence is crazy
@920B 5 ай бұрын
IK 😭😭
@valoryang309 5 ай бұрын
My Glorious kings we should alliance again next year at berkeley and not throw
@Chris920B 5 ай бұрын
What’s up 675D!
@dontsub6003 5 ай бұрын
Can you explain the ratchet more?
@920B 5 ай бұрын
When the piston releases, the little standoff connector engages with the 12T gear (rubber banded back). Then the gear is only able to go one way.
@danielalp6871 5 ай бұрын
Is winch climb like what 2654P has?
@920B 5 ай бұрын
Yeah essentially
@josephavalos9515 4 ай бұрын
Could I get ur cad for vertical bar hnag
@Chris920B 4 ай бұрын
I'm not going to share that, though there is plently of information in this video and around social media on this type of hang already.
@jonnyedit 5 ай бұрын
Wait how did you guys do skills without kicker
@920B 5 ай бұрын
Removable kicker. The climber motors then power the kicker
@4073B 4 ай бұрын
@@920B we’re kind of confused on how you guys swap out your big, bulky climbing mech for a kicker in such a short period of time. Wouldn’t there be too much bracing or fastening points on it to swap it out every time you want to do skills? how do you do it
@920B 4 ай бұрын
The kicker mounted on the back of the robot, we never took the climber off.
@4073B 4 ай бұрын
Wouldn't you have 99W at that point?
@920B 4 ай бұрын
@@4073BNo, we take the chain off of the climber and onto the cata
Cool Items Official
Рет қаралды 56 МЛН