93-97 Toyota Corolla Ignition Coil Replacement

Рет қаралды 193,864

7 жыл бұрын

93-97 Toyota Corolla Ignition Coil Replacement
PT Auto Warehouse ignition coil part#
IC111 you can buy it from Amazon.com for 15 dollars
For OBD1 cars you use a different part number Delphi part number GN10216 you can buy it from amazon for around 21 dollars
check out our instagrams: _sloww.v8
_sloww.e36

Пікірлер: 91

@dilutedparanoiaable 2 ай бұрын

This is by far the best video for replacing the ignition coil for this car style. Easy instructions and easy to understand. I like the use of colorful metaphors and good humor 😂. It fixed my problem (hard idle and stalling after warm up or any load like AC killed it) there was a very obvious crack across coil surface.Now it is back up and running. My car is a 95 1.6 L corolla. Thanks bro.

@tlteal Жыл бұрын

Thank you very much! After replacing a few other parts on our 95 Corolla with 1.8L, I followed your lead and replaced the ignition coil and poof, she is back up and running. Symptoms (idles fine but if you give it some gas it sputters).

@nrg16108 5 жыл бұрын

My 93 Camry runs 5 min then stalls. Then runs 1 min then stalls again. Then wont start just turns over. Found a bad ignition coil although the distributor was new. No one believed me the coil failed.

@larrywoods3195 3 жыл бұрын

Awesome..just finished mine thanks.

@Engineerboy100 6 жыл бұрын

Good job, I enjoyed your video, thanks for sharing.

@leegar1537 6 жыл бұрын

nice job bro, I love my toyota corolla to, 1997 and 101.000 miles and run like a champ, thanksssss

@starlightandeverythingnice1650 6 жыл бұрын

lee gar mine is 95 with 190,000 miles and still runs like a champ better than the overweight mustang I used to have

@toddlittle9095 4 жыл бұрын

I have a 1996 just went over 300,000 miles

@marieryan7973 2 жыл бұрын

I have a 95 116000 miles it's like new

@gerson1862 Жыл бұрын

@@toddlittle9095 eu tenho um 97 com 342.000 km está como novo.saludos desde Brasil 🇧🇷

@ivanobesofocusongoals 7 ай бұрын

Hi. I have the same car, but something keeps burning the ognition coil, what could be the problem?

@SashoS91 7 жыл бұрын

Thanks for this video, I actually had a problem with my car and the distributor to check and found the condensor wire was completely not connected. i wanted to know where to connect the wire in the distributor

@user-qg9df9pt1h 4 жыл бұрын

Thanks for video really helped

@dashtyATG 5 жыл бұрын

i just wanna thank you i am from North Iraq

@danielhoward2921 5 жыл бұрын

I have replaced my starter on my 95 toyota and the ignition also but when I turn the key to the on position it causes the starter to stay engaged how do I did this PLEASE HELP

@kingbeattygaming2247 2 жыл бұрын

I just changed the coil Spark plugs and cap now my car is jerking when I go to punch on the gas it wasn’t doing that before

@addonexus2656 Жыл бұрын

At about 3:00, the two little plastic bits on the regulator. Theres the black cover with the two clasps, and then the grey plug type plastic clip in. The grey one on my car broke while replacing. Does this matter? Do i need a new one?

@jeronimocuthbert3799 6 жыл бұрын

Hey. When you say distributer you mean the o ring? Or everything in total..

@franciscomorales7012 9 ай бұрын

hi.. maybe can help me.. i want to know how many "Knock sensor" use the corolla 1994 ? do you knwo if are 1 or 2 sensor ?

@javiermanriquez4533 5 жыл бұрын

How I can check the ignition coil if is bad

@queennchronicales7815 5 жыл бұрын

Thank you for your time spent on this well done video. Did this fix the exceleration problem

@blaspogelse8376 5 жыл бұрын

How did you know your coil was bad?

@nicholasgill8066 Жыл бұрын

Respect my guy,

@TheShamwari 2 жыл бұрын

My Toyota Carina 1987 with the the 4FE engine, at 84,000 miles is now on its third coil , WHY ??

@TheShamwari 2 жыл бұрын

i HAVE JUST FOUND A VIDEO, BY A LADY , WHICH SHOWS THE INSIDE A HONDA DISTRIBUTER WHERE THE TERMINALS FOR 4 AND 2 PLUGS ARE SEPERATED BY A RIDGE AND THE ROTOR HAS A BIG INSULATING DISC. POSSIBLE DUE TO THE SAME PROBLEMS AS IN OUR TOYOTAS ?

@ae-mq2yo 7 жыл бұрын

thank you

@jobingodylyons9990 6 жыл бұрын

my 1993 Prism..1.6 had 3 wires on the top side of ignition coil..one down below got a little confused where this other wire came from compaired to this example..JUST TAKE LOTS OF PICTURES..BEFORE YOU TAKE ANYTHING APART AND AS YOU GO..IS MY ADVICE..SMART PHONES REALLY ARE HELPFUL.

@MCCENTx2 6 жыл бұрын

same on my 95' prizm and one wire broke off and i dont know where to reattach it

@jobingodylyons9990 6 жыл бұрын

+Ched Cheese guess you could look at a disruptor..new at the auto parts store see where it goes ..on the coil 3 on top and the short one on the bottom.

@SpecialPenguinnn 5 жыл бұрын

or mark them

@smithwesson4522 3 жыл бұрын

@@MCCENTx2 same as Toyota Corolla same year same engine

@MCCENTx2 3 жыл бұрын

@@smithwesson4522 Yeah super easy car to repair. I replaced my ignition coil and never had a problem with it. The wires were in there really tight but I didn't need many tools. A screwdriver, soldering iron and some shrink tubing to protect the wires.

@bazilbread5590 Жыл бұрын

Nice video not sure if this is my problem

@cpaul1093 2 жыл бұрын

Does anyone know the ohms specs for testing one of these coils? In order to determine if it is good or bad?

@d.scottjohnstone6813 2 жыл бұрын

i believe 1.1 to 1.7 ohms of resistence

@mxmobile5619 Жыл бұрын

Primary: 0.35-0.50 Secondary: 9,000 ohms to 10,000 ohms