Thanks for the video dude. Looking into Cunningham Machine now. You have any issues at all with that shaft so far?
@bradybjp Жыл бұрын
One road I need your help , I have a 97 tahoe and I’m stuck
@bradybjp Жыл бұрын
I like how we’re both stuck tho and we’re both looking for the same fix , I just ordered the Edelmann 3003 Elite steearing box and I hope that fixes it
@THATNI99AJOHN5 ай бұрын
@@bradybjphow you like your steering box ?
@bradybjp5 ай бұрын
I’m still chasing dragons on the steering , I’m looking at a complete custom steering linkage from Schumacher metal works or the rack and pinion kit from elevated designs , i even paired the eldenman steering box with the borgeon steering shaft and it is still very bad steering, it did help a lot but it did not give me what I wanted , I think I have to replace everything single moving part , control arms and everything
@bryanmagee40952 жыл бұрын
Ive replaced every single part up front including the steering gear box... still 2.5-3" of play... I've heard mixed reviews on these shafts.. but I have 33's and I'm tired of fighting to keep her going straight!
@grindersandgears3445 Жыл бұрын
I'm in the same boat, hoping this part will finally solve it, really makes driving it a chore, especially in the snow when I can't tell if it's the play or if I'm losing grip. Did you ever get yours sorted, and if so how?
@Seth_Michael_Hernandez Жыл бұрын
Didn't fix the slop, and didn't discuss that at the end. Gearbox or pitman arm the next step?
@StfuFFS Жыл бұрын
Maybe you should find the voltage drop in your gas gauge sending unit.
@jperrod1979 Жыл бұрын
Maybe...I think it was a oil/needle issue with the gauge though. I fixed it once I added oil.
@StfuFFS Жыл бұрын
@@jperrod1979 those fuel sending units were built with gremlins installed so they'd fail every 100k miles. And they stuck them up at the top of the tank so that mechanics could charge the enviro fees and 8 hours of labor each time it's serviced. It's called "rainmaking" and it's my least favorite thing about GMCs.
@grntchstrmdws Жыл бұрын
Why was a rag joint used by GM in the first place? What problem was it designed to address?
@jperrod1979 Жыл бұрын
Probably vibrations translated to the steering wheel.
@luminalfever76787 ай бұрын
How did you get the upper shaft out of the original steering shaft?
@MiamiWebDesign Жыл бұрын
It still looks like there’s alot of play there just not as bad as before obviously. I was thinking of doing this to my obs Tahoe but do you really recommend it still or should I just deal with the 2” play I have now? Thanks!
@clos9902 Жыл бұрын
Maybe he has a pitman arm thats worn out
@MegaDysart Жыл бұрын
This style steering will never feel "tight" unfortunately. I'd just check your pitman and idler arms and try to tighten the box up a turn or so with the backlash adjustment on the top.
@bamseals41262 жыл бұрын
Link please?
@Joe_Blo Жыл бұрын
I wouldn't do this on a 4WD. Besides, the rag joint last 20+ years, likely longer than your already old rig will last. I recently replaced mine in my 37 old 86 S10 but should have done so about 10 years ago. The rubber wasn't rotten or torn, but was oily & mushy from power steering & AC compressor leaks. A car following me reported me as a possible drunk driver once because my truck was tramlining badly on a road with a load of grooves in the asphalt. I had a bad front shock that was sticking down too that made things worse. Fixed.