Tom E ohh man yeah I love this truck

Not just you. The 10th generation F150s are legit!

The Chief for sure man i am currently working on it to get it painted i will post some pics maybe even a short vid when its done 😎

JEMTZ - I look forward to that. Great video!

Thanks

PoohsHusband Yeah!! Brother lets keep ‘em alive and mean thanks for watching and good luck with your project

G34RH34D I feel you man call me crazy but to me its sad to see vehicles thrown away after almost a life of hard work after so many memories just because you don’t want to invest a title time and effort. I am currently getting it ready for paint this truck is sold and pretty sure new owner will be more than happy to have this on his arsenal.. I am not a fancy youtuber i am just trying show what i love check out part 1 of getting ready for paint 97 f150 4wd 5.4 DOCH getting ready for paint part 1 Thanks for your comment made my day

And hey man anything is possible the sky is the limit I personally haven’t work on a 4.2 performance wise but pretty sure there are options out there or you can always upsize 😉 good luck with your project I would like to see it someday

@@jesusmtz413 I would at a much much later date. This engine only has 89k. lol

Ok in that case i will make my own version of ecoboost lol twin turbo that beast

Toss the 4.2 and ls swap that thing and I wont talk shit about the 4.2 because I also have a 97 with over 300k mile on it but performance wise there is nothing that can be done to the thing with $1000 to double the power. Buy a working tahoe for $1500 and do the swap yourself.

Awesome I would like to see it good luck

Thank you very much i love what i do and always trying my best and always pushing myself i wish i can post everything i do but i get so carried away that forget to video taped it lol 😂

Sinthya Maldonado thanks for your comment still got a long way to go

dion beavers great i would love to see its process

Desert Rat Racer thanks man a few more things in my bucket list like paint, gears, custom upholstery and hopefully a supercharger lol i am thinking on that last one probably after everything else 😉

JEMTZ I love what you’ve done,. I have a 2001 F150 with a lift as well but only 33s. what gear ratio did you end up going with? I think those are 35s? Maybe larger tires? Awesome work, it totally inspired me to keep working on mine..

Mike Smith awsome are you thinking about doing something like this to it

Thanks a-lot brother 🙏 wish you the best on your project hope to see some pics in the near future.. what are your plans on your 98

Thanks man 🙏

Thanks brother love what I do

Thank you very much!! Just here doing what i love cant wait to start on my new project... ✌🏼 😎

@@jesusmtz413 whats your next project :o!

85 bronko

Thanks man actually is already done I finished it painted red soon ill be posting the video from start to finish ill like to see what you do to your truck and honored to know this video inspired you to build your truck up

Awsome… what do you have in mind for it

AnOnYmOuS 7-7-7 si carnal muchas gracias me gusta lo que ago esta troka ya la termine estoy travajando en el video donde sale ya terminada l... mi nuevo proyecto es una 85 ford bronco 4x4 que estuvo tirara literalmente por mas de dies años merece una nueva oportunidad... gracias por tu comentario no olvides subscribirte pronto suvire el nuevo video de la 97 f150

Thanks man

O yeah for sure brothe it did

Thanks🙏

Awesome and yeahh bro I definitely like to see your build send me the link once you make the video. Thanks 🙏 for yout comment

Cody Humphries thanks man and yes i am working on another video it’s painted already

Thanks brother hope this video inspires you enough to bring another f150 to another level and run for another 20 years

Thanks bro Ill like to see some pictures of your ride

@@jesusmtz413 facebook.com/groups/limitededitionsprinter/ see it here.

Thanks 🙏

Thanks man

Thanks

Ferguson Hobby Farm 🙏 thanks

Ivan R muchas gracias compa

Thanks 🙏

Thanks 🙏

Lol I guarantee you won’t regret it

Thanks man god bless 🙏

alfredo lomeli hey man I would say if you want to do it just go for it get yourself a extra bezel from a junkyard and some fiberglass from your local autoparts and try it just make sure to protect your tablet really good lol worst that can happen is you dont like it but you can always go back and fix it... you gonna be an expert before you know it good luck and hope this video gives you an idea more or less for your project thanks for the comment

Joe Holguin sure man sorry for the late late response i am in san antonio tx where are you located

@@jesusmtz413 el paso texas

Thanks man i am flattered and very happy with the outcome i am working on the last video when its already painted and as far as the motor i did a 5.4 4v swap that came off of an 03 navy oh man it’s crazy powerful

fidel de luna ayala gracias 🙏

Sure man not a big deal I got my motor from a 2003 navigator 5.4 32 valve and if you doing the body lift that will give you enough room for the motor and hey feel free to do what I did to mine if you got any questions I’ll be honored to assist you with your build... good luck!!

@@jesusmtz413 thanks a ton man!

No worries keep me posted on your build

arriagarobz thanks sure man whatever you need

MikeHillman i had to reroute some connectors from the original harness and still running the 4.6 pcm need to get it tuned but it runs very good i can only imagine how will it run when its tuned

@@jesusmtz413 If I had a complete Navigator donor vehicle would that make this swap even easier?

Chris Hunter yes it will

4r75e and its electronic shifting transfer case

@@jesusmtz413 Was that difficult to change to electronic case? Or plug and play?

The truck came with it

Had 3:55 8.8... and thanks I like watching it too reminds me of the things i can do and keeps me going thank you for your comment and good luck with your project

Thanks!!! I did the whole thing in two years little by little and yeah i liked the look the sport bed gave it thats why i choose that bed over the flair side

Axel Macías i am running the 97 4.6 pcm all i did is reroute some of the connectors on the harness to be able to reach some of the sensors, fabricated a bracket to hold the both of the coil packs from the 97 4.6 under need the intake manifold as you can see in the video and routed spark plug wires through the back of the engine used fuel injectors and mass air flow sensor as a set from the 4.6 and i need to put an extra temp sensor on the lower intake manifold as the 97 has 3 different temp sensor (coolant temp sensor, temperature switch, and cylinder head temp sensor) and the 03 5.4 4 valve has COP and only 2 temp sensor ( coolant temp sensor and cylinder head temp sensor) afterwards had to take it to the muffler shop because the pipes didn’t match the exhaust manifold’s angle.... hope this helps and good luck with your build i would like to see how it came out thanks again for your comment

JEMTZ appreciated very much. I have a 2000 navigator which I’m giving back to my dad as it was his to begin with, it’s not molested besides exhaust, and I’m restoring the interior for him, and upgraded to climate controlled seats when I give him the keys. Currently I’m searching for a f150 ‘97-‘03(preferably 90s model Bc of the blue/greenish interior lighting and dash. Just looks more old school.) and I’m planing on making that my daily driving work truck, just curious as to what to do when the old 5.4 gives out and I have to replace the engine. I’ve always thought about this swap and I believe you’re the first I’ve seen on KZfaq to do it. On my navigator I had planned to install a f150 Lightning/Harley Davidson supercharger just for the heck of it. Might add that to the list on the 5.4 4v swap if it happens.

Hey what up man.. Thanks 🙏 love that truck... currently working on a last video as its been finished... i am honored to know someone out there likes what i do... i can definitely do something for you the thing is that I would need the tablet to work around it and fabricate the bezel i am in San Antonio if you are willing to do that i ll more than welcome and up for the challenge... Thanks for the comment have a great day

Lol I think it looks meaner 😂 I’ll think about it thanks bro

@@jesusmtz413 10th gens are a passion of mine. Love the build. How hard was the 4v swap? I’m thinking about doing it on my 98 actually.

It wasn’t really that bad other than rearranging some connectors pretty much everything went smooth

I got it off from a 2003 Lincoln Navigator and yes i can do this i am a mechanic apologize for the late response just been working alot

@@jesusmtz413 i'd be willing to pay whatever it costs if you could help me with some work with my 2003 4x4

TCW Gaming what did you dad in mind

I found a 5.4 engine from a 2002 Lincoln Blackwood. It should work in my 97 right?

Hey man thanks for the compliment and yeah i installed a 6 inch Zone lift and a 2 inch wheel adapter to my 20 by 12s offset wheels and gave ti that look... to me looks awesome on 37s by 13.5 tires .... i think the off set plus 2 inch adapter along with wider tires made a huge difference... I would like to see your ride before and after you do it.... thanks again and good luck with your project

You keeping the 4.6 and putting a lift on it?

Engine came out of a 2003 navigator… thanks and good luck with your project

@@jesusmtz413 did you have to change out your transmission or did everything fit

Everything fit

@@jesusmtz413 cool thanks so much

My pleasure bro feel free to ask me any questions

Yes you will need to stretch the harness on some plugs you also will need to custom tune your pcm but it will work just fine with out a tune that is if you really want to taje advantage of what the motor is capable of thats pretty much it yours has the coil on plug as the 5.4 DOHC so it makes it easier. Good luck 👍🏼 let me know how it went

Dude this was alot of help Iv wanted this motor in my 2000 expedition for some time now and iv been asking about plug and play and I finally found my answer thanks. Oh and nice ford I like that custom screen

byron turner thanks man hope this helps and good luck with your build I’ll be posting another video about mods for the lower intake sometime soon and yeah that screen catches people’s attention lol thanks for the comment

I have a zone 3 inche body lift www.ebay.com/itm/171470629522 As well as a a zone 6 inche suspension lift www.ebay.com/itm/261862401371 20x12 offset wheels and 37x13.5 amp mud tires I also put 1.5 inch wheel adapters because i bought wheels that will fit my 2013 ram but ended up using them on my ford so another 1.5 inches gave it that look i was looking for RockTrix - 1.5 inch Wheel Adapters Spacers Converts 5x135 to 5x5.5 (Changes Bolt Pattern) 14x2 Studs - Compatible with Select Ford Expedition F150 Lincoln Navigator Blackwood - 5x135 to 5x139.7, 4pcs www.amazon.com/dp/B00NYKI6IG/ref=cm_sw_r_cp_api_glc_fabc_ImX6FbBV66RJV Fell free to comment if you have any questions

For sure the f350 has a more spacious engine bay i don’t think there should be any problems all i can think of is rerouting some of the connectors and enlarged the cylinder heat temp sensor connector bit other than that shoul be pulg and play ..... 04 5.4 2v has COPs and the 4v DOHC has COP too so your PCM shoul be fine you can custom tune your pcm afterwards to really take advantage of your new motor..... good luck with your project

@@jesusmtz413 i appreciate that... my only real concern was the ac/heater box on the firewall... was thinking of adding some good cams for torque and pulling in the mid range... in your opinion can the 5.4 be bored out say .040 ? I definitely want alot of torque. The engine made 300hp stock... if I can get 400 that would be good but definitely want more torque

I painted it red

HIRAM ABIFF thanks

Yes i did juts needed to rearrange some of the connectors and it’s pretty much plug and play

I have 37s by 13.5 R20 with a 6 inch zone suspension lift and a 3 inch body lift

@@jesusmtz413 I was looking at the 6 inch zone lift kit, do you need aftermarket upper control arms or what else would you need?

No the kit comes with everything you need for the lift

@@jesusmtz413 how’s the ride quality? Cuz I have a 99 extended cab lariat 4x4 & was looking into doing this lift or a 3 inch lift

Abraham Rodriguez www.ebay.com/itm/253608133956 ese es de tres pulgadas para una 2wd no esta tan caro y esta facil de instalar suerte con tu proyecto carnal

www.ebay.com/itm/261862401371

www.ebay.com/itm/274176387702

Thanks I had installed a 3 inch body lift before i did the 5.4 4v swap and it made it alot easier with the extra room i used my 4.6 injectors and mass air flow sensor and had to rerouted some connectors in the harness so the reach the taller intake from the 2003 navigator. The 97 4.6 came withe three different temp sensors ( temperature sensor, coolant temperature sensor, and cylinder head temp sensor) i am currently just plugged the temp sensor for the gauge but i need to modify the lower intake to be able to install coolant sensor drill it and tap it and also make a harness connector for cylinder head temp sensor larger to reach the back of the head on passenger side thats where is located on the 4v also change gears on my differentials to accommodate the 37 inch tires. Hope this info make sence.

Forgot to mention 97s came with 2 coil packs and 2003s with coil on plug so i fabricated a brakets to install the coil packs under the intake manifold and ran the spark plug wires through the back to keep it a little cleaner

@@jesusmtz413 so you are running the factory pcm?

Yes i am running the factory pcm for the 97 f150 4.6 i still need to get it tuned

@@jesusmtz413 your 4.6 injectors are robbing a lot of power and you really should run the Navi trans and PCM and instrument cluster

Si

Pronto subire un video ya terminada

37x13.5

@@jesusmtz413 tengo unas 37x12.5 y lo quiero alzar pero no tanto cuantas pulgadas me sugieres

6 pulgadas minimo

Yeah bro everything is pretty much plug and play other than a few connectors that had to be rearranged in order to reach

@@jesusmtz413 did you have to switch the computer out? Anything transfer over from the original 4.6? To the 5.4 like intake ?

I used my 97 pcm and yeah i used coil packs from 4.6 and ran the wires through the back of the motor as shown on the video other than that its all 5.4

What year you working on

@@jesusmtz413 1997 Xlt 4x4 Will be doing a suspension lift.

baue fishin i don’t think it will work yours has coils on the front suspension and they wont be large enough

No it mounts exactly the same as the fleetside bed

Te be honest i never sold one and i would need the ipad to be able to make it i am in San Antonio tx i will be honored if i get to do one idk how much do you think is fair

@@jesusmtz413 you tale me brother you the one going to make

Hola 👋 yo compre placa de calibre 12 y la corte con una graina

Gracias saludos

Saludos suerte con tu proyecto

Not this kit beacause yours have springs in the front and 4wd comes with torsion bars ill check once i get home from riding tonight is a beautiful night to ride 😈

There isn’t really many options as far as lift kits for 2wd but i found this it might help to give you the look you looking for www.ebay.com/itm/162832720894

MODULAR PERFORMANCE RACING not really. Other than rerouting some of the connectors on the harness to being able to reach on the new motor every thing else is plug and play pretty much

JEMTZ that’s great , thanks a lot

Its a rough country with a light bar

JEMTZ thanks!

No problem

Te be honest i don’t think your pec will work because the newer 3v has variable timing solenoids that are controlled by the pcm and if you install one with out will turn the pcm crazy wont know what to do my suggestion will be instead of swaping it for a 4v invest on a turbo or even a pro charger that will give you more horse power and torque than the 4v along with a nice tune hope this helps and good luck

Mine its a 97 so it was different but since yours is a 2003 it will be alot easier you might have to rearrange some connetors to be able to reach like intake runner and cylinder head temp sensor that i can remember now let me know how it cones out good luck!!

On your truck use the 5.4 Dohc harness it’s plugin play you only have 2 swaps out 2 connecters the temp being one. But don’t drive it like that cause it will run funny go get it tune so it can run 100 percent

It has a 6 inch zone lift and a 3 inch body lift

Michael Evans first of all i used a product called superclean degreaser www.google.com/search?client=safari&channel=iphone_bm&sxsrf=ALeKk029EC4mStkyCemwCWLuUDcfR7bojw%3A1590765354179&source=hp&ei=KifRXpLjBpHaswXMkp3wAg&q=superclean+degreaser&oq=superclean&gs_lcp=ChFtb2JpbGUtZ3dzLXdpei1ocBABGAEyAggAMgIIADICCAAyAggAMgIIADICCAAyAggAMgIIADoHCCMQ6gIQJzoECCMQJzoFCAAQgwE6AgguOgUILhCDAToECAAQClDOC1ioG2DXI2gCcAB4AIABdIgByQeSAQM3LjOYAQCgAQGwAQ8&sclient=mobile-gws-wiz-hp to clean all grease oil etc from frame while power washed all dirt oil etc then scuff it lightly then apply undercoat www.google.com/shopping/product/2966047579909828625?q=dupli+color+undercoating&client=safari&channel=iphone_bm&biw=375&bih=635&tbs=vw:l,ss:44&sxsrf=ALeKk00aeWeJIiYjI4mdYUVVXjlfi3o08w:1590765606420&prds=of:1,epd:11455681480352021720,local:1,prmr:2,cs:1 note tape everything you don’t want to coat or get overspray on hope this helps it came out looking really good.. good luck!!

97lowbo i am in San Antonio Tx and it depends on what you got over the years coils changed from coil packs to coil on plug so it varies a little

Im from laredo man I have a 99 f150 v6 and planing to do a mark viii 4.6 4v swap do you know what I need to do to make it work ? I would really appreciate any help

The grill i made it myself from scratch you can see the progress on the video and the mirrors i got them from ebay www.ebay.com/itm/282602768024

@@jesusmtz413 oh thats dope thx

You’re welcome hope this helps

miclo bellman I currently using factory 8.8 355s but am planning on doing 411s front and back to compensate the big tires farthest i took her is from san antonio TX to Lubbock TX no problem

@@jesusmtz413 youre in san antonio?

Yes i am

JEMTZ I’m out here too do you have a shop because your work is outstanding

Thanks man and yeah i have a shop and i love working on my projects on my spare time

Deeth Nuths wheels are 20x12 off set and tires are 37x13.5

Sure man what you looking to do to your ride

Camden Blair well i ride on red all the time in San Antonio and never had an issue with cops not sure if they are legal or not i like them

That will be interesting maybe later

Edgar miguel Cazares ríos yes i used the same wire harness that came with the 4.6 since i was still going to use the original computer all the connectors are the same all i had to do is dismantle the harness and reroute some of the connections for the to reach

And spark plugs wires?

The 97 4.6 came out with dual coil packs and the 2003 5.4 DOHC has coil on plug so i made some brackets to hold the coils underneath the intake manifold inside the engine bay and ran the spark plug wires through the back and into the valve cover where the harnes for the coil on plug should enter there are pictures in the video showing it

@@jesusmtz413 so if you used the same spark plugs wires?

Yes

What you think

Thanks

this body style is not bad what are you talking about

@@blakehanson2336 no one said it was bad.

@@blakehanson2336 just fucking ugly as shit

Well i respect your opinion man everybody has their own taste as for likes and dislikes just tried to make it look a little better

Jajaja they are not silverado mirrors they are tow mirrors they extend out even more so you can see if you caring a wide load chevy parts wont fit on a ford thanks for watching

Thats why i put a bigger motor and upgraded suspension lol