Thanks for your feedback.

keshena naidu you are welcome!

tota896 you are welcome!

Thank you for your feedback

Thank you

Thanks for watching our videos and for your feedback. We haven't with MPLAB but we will soon. Here is one using mikroC compiler: kzfaq.info/get/bejne/q7CWaKam16rdoZc.html

Thank you

If you want wireless it's better to use a wireless device like the ESP8266 unlike this ENC device. Watch this video: kzfaq.info/get/bejne/qsqfmb2myt3TZqM.html

Please note there are so many components supported by flowcode and new ones are included in every new version of Flowcode. We can't guarantee you we will do a video on those displays. We can only cover standard communication protocols like I2C or SPI with no guarantee to use those displays as examples. You can right click those components in Flowcode and select help to learn more how to use them. If you really want us to record a video on that, then it has to be a special request which comes with a small fee.

Please note there are so many components supported by flowcode and new ones are included in every new version of Flowcode. We can't guarantee you we will do a video on those displays. We can only cover standard communication protocols like I2C or SPI with no guarantee to use those displays as examples. You can right click those components in Flowcode and select help to learn more how to use them. If you really want us to record a video on that, then it has to be a special request which comes with a small fee.

Thanks for your feedback. We are based in South Africa.

Yes. I haven't tried this library with C99. Many people complained that it doesn't work with it only C90. With html page you will need to communicate with HTTP which is not supported yet with the current version of TCP/IP Lite as far as I know. You will need the full TCP/IP stack not this lite version

In simple terms. Yes you can. But the question how are planning to access the controller? You don't have to use a web server with Http only but that's one of the options among many more like UDP, TCP/IP etc. There must be some kind of interface to access it from like a web page, PC GUI or even command prompt.

There are many factors to consider: 1. XC8 is microchip compiler, so it's guarantee that all released microcontrollers will be supported on time, with mikroC, support might be delayed or even not supported. 2. XC8 is free (the only difference with the professional license is code optimization) but mikroC is a paid compiler, the free version will limit your code size to 2kb, so you can't compile bigger code in free mode. 3. mikroC is generally easy to learn compared to XC8, it's supplied with plenty hardware and software libraries that you can use easily and speed up your design, but with XC8 using MPLAB Code Configurator (MCC), you are also getting the MCC generates the library codes for you for most peripherals. 4. MPLAB Code Configurator library codes is open, you can view it, modify it as you want for your specific application but library functions for mikroC are closed, you can't view what's going on inside or can't modify. The list is long. You can decide for your self based on these info.

What Do you want to do? You are not clear in your question.

@@StudentCompanion Hi, simply, I would like to be able to ping the module using MPLAB with XC8. I don't see where can I configure the RST pin using MPLAB

Nevermind, I made it work. Thanks anyway.

@@PauloMoreira1970 ok.

We will do that with mplab as well. It's part of our Next to do list

If using XC8 v2, is it in C99 or C90?

​@@StudentCompanion Wow. I've changed to C90 standard, under "Project Properties" -> "XC8 Complier", and WORKED! Thank you. You're a very good professional.

@@fvgm Thank you for your feedback.

@@fvgm Beside the C90, the SPI and ENC28J60 that you didn't select because you are using a PIC with built-in Ethernet, are there any other changes you did like in MCC configuration or in code to work with TCP/IP Lite stack?

Which PIC are you using? What's the version of your XC8 compiler? Can you post the full error message?

​@@StudentCompanion Using the similar pic u are using in the tutorial pic 16f18346 with XC8 compiler (v2.05) also u can check the programm from this download link we.tl/t-wTPwuRxnLM ERROR In file included from mcc_generated_files/TCPIPLibrary/ENC28J60.c:46: In file included from mcc_generated_files/TCPIPLibrary/../mcc.h:58: mcc_generated_files/TCPIPLibrary/../drivers/spi_master.h:31:10: fatal error: '../spi1_driver.h' file not found #include "../spi1_driver.h" ^~~~~~~~~~~~~~~~~~

@@nikhilmiglani8321 Try to change to C90 instead of using C99. It worked for me.

Hi. Which microcontroller are you using? If it's not in your Proteus version it means you can't simulate it. Choose a different microcontroller. Concerning the error, it's better if you post more info. What library are you using? What's the version of your xc8 compiler?

@@StudentCompanion Hi, thanks four you response. Im using the same pic16f18346, Im going to send you a youtube link with all the process im doing to show you exactly whats going on.

@@StudentCompanion I get MPLAB V5.1, XC8 V2.10, tcp V 2.2.12, Foundation Services V 0.1.31

@@StudentCompanion I cant find this unique library

The problem is XC8 in C99 mode. I think this library works with C90 only at the moment.

We don't approve of anybody to download by illegal means our videos. These videos are only supposed to be viewed free of charge on KZfaq platform or on our website and never to be downloaded to your personal computer. That's how we generate some income from KZfaq advertisement to fund the cost of producing videos and buying books and development boards. You cannot expect support from us while you are downloading illegally videos. It takes time and effort to produce them.

it is nothing personal i did not do anything to offend you. i just complemented that you guys are doing a great work i know how these things are hard to develop I REALLY do that is why i'm politely asking u guys to upload more videos. Again sorry

Hi. You mean other videos covering Ethernet topic?

@@StudentCompanion yes bro, relay control for client and server function.

No we don't havr yet, but we are working on it. It will be uploaded soon. Just subscribe to this KZfaq channel and press that bell icon and you will be notified when we upload new tutorials

@@StudentCompanion thanks bro, i did a long time ago. :)

You are welcome!

Download the project from the website. In the description of this video there is a link to a web page.