Glad to help. 👍🏼

Clayton Montgomery lol, I was nervous about that also. It all worked out though thankfully.

Glad it helped. 👍🏼

Josh Jones thanks man, appreciate it! 👍🏼

Glad to help. 👍

Thanks. I didn’t do either. Just bolted it all up, bled the brakes and went for a drive.

bert visser thanks, it really made a huge difference on the appearance of my interior. The original steering wheel was falling apart.

Would this hub fit a 2002 Tahoe ?

Thanks 💪🏼

danny stubblefield thanks, it’s so much better than before!

1GHOST that sucks. Thankfully Florida isn’t strict about vehicle equipment.

I’m in Cali too . Don’t understand what the steering wheel has to do with the smog ?

When I first got this wheel I didn’t realize it would be deep like this. It’s actually kind of nice though. I think I prefer it.

If there’s no longer an airbag then what purpose would the connector serve? Why would I send the adapter to get machined just to save a pigtail that I’m not using? This method has worked well for me. I’ve had it on my truck since this video was posted with zero issues. If some day I decide to go back to an oem steering wheel with the airbag then I’ll get the necessary parts from the junkyard.

@@REDRUMRx7 The purpose it serves is: 1. Being the FACTORY HARNESS 2. Future reinstallment 3. Parts for these trucks are being discontinued and are getting harder to find, hopefully you'll be able to find this part from the junkyard years down the road I'm not saying that it's not going to function if you cut the wire, obviously it's still fine. But it's dumb to cut the factory harness, regardless of what vehicle it's on.

@@sethh8892 I have no intentions of ever installing an airbag on this truck ever again.

@@REDRUMRx7 You just said: "If some day I decide to go bavk to an OEM steering wheel with the airbag then I'll get the necessary parts from the junkyard."

@@sethh8892 correct. Because if some day I were to make that decision then that would be my solution. At this moment in time I have no intention of that ever happening though.

Yoshi Esquire thanks, it shows it in the video, I think it’s 5167 but please double check in the video.

Julian thanks! Yea I did cut the wire for the airbag. It’s the only way for the hub adapter to sit flush.

YaGoonie 5.3 i don’t have the horn working on mine yet but I don’t think the adapter being deep would be a problem.

Sorry man I really don’t know.

No problem 👍🏼

Yea I’ve considered it, I might do it when I go back in there to add a horn button and make the horn work.

@@REDRUMRx7 that would be awesome most vids are on imports so would be great to see.

I don’t remember about the flat spots but this should fit all the gmt800 trucks from 99-02.

YaGoonie 5.3 I don’t have the horn working on mine because the steering wheel itself didn’t come with a horn button but it can be made to work pretty easily. I plan to get around to it eventually.

@@REDRUMRx7 you should make a video of the horn install when you do it 👍

Very minimally. I actually prefer the feel with the smaller wheel.

The parts came with all the hardware. Try contacting who you got the items from.

@@REDRUMRx7 did it come with the wheel or the adaptor?

@@colekennedy6317 I think the wheel but I could be wrong. It’s been a while.

With this specific adapter I had to cut the wire as well as the little plastic nub that sticks out. The adapter didn’t have a provision for it to slide into.

REDRUM Rx7 alright I was wondering, Bc I’m like what if I want to change it back. Thanks for the feed back

@@ruthless2221 yea if you wanted to change it back you’d have to replace that plastic ring with the srs connection.

I believe the adapter you need is a grant 5196

@@REDRUMRx7 thanks for all the help.

@@motornation2578 no problem 👍🏼

Do it stick out further?? Looks like the neck of it is. Just wondering ​@@REDRUMRx7

Yes it does. Sorry I took long to respond. I just noticed your message.

@@REDRUMRx7 all good man thank you!

The wheel ended up roughly where the original wheel was.

Glad u liked it 👍🏼

Yes the airbag light will stay on. My truck already had that light on so it didn’t bug me. The cord I cut was the power supply for the airbag.

@@REDRUMRx7 well that’s perfect and you can take that light out the dash if your ever in there doing something else

@@jetlifesr6437 yea man. I was actually in the cluster not too long ago swapping the bulbs to led and I totally forgot to pull that light out. 🤦🏻‍♂️

@@REDRUMRx7 do you know how to do that upgrade? I’m trying to put the 2500 cluster with some led’s and plus I want a transmission temp gauge

@@jetlifesr6437 i just bought some bulbs from eBay. They went right in place of the originals

It’s a cool mod. The only downside is that you lose the airbag but if that isn’t a concern then I say go for it.

@@REDRUMRx7 i dont mind losing the bag love custom ...💯%

I never got around to it. I just need to order a button and I’ll be able to do it but I’ve been slacking.

I’m not 100% sure because in either 03 or 04 they changed the column. If your truck has the data link screen thing on the cluster then I think this adapter should work.

No airbag on new steering wheel.

Yes it did.

The button is b&m part# 46003

In the video I show the part numbers of the items I used. The steering wheel came from Amazon and the adapter came from summit racing but Amazon may also have it.

I traded the truck for a different car in January but at that point the wheel still looked like new. I’m sure it’s still in great condition.

Kris McCarthy I’m pretty sure they will hassle you about it. I still have the light lit up on mine.

pull the cluster and remove the bulb for the airbag light, I swapped my seats for non airbag seats and had to do the same to get the light off

Sorry, I threw it out right after I installed this new one.

REDRUM Rx7 dang alright that sucks new ones are iffy idk if I wanna pay the price lol but thanks a lot have a great day

No I actually haven’t. I don’t really use it often so I forget I don’t have one until I get pissed in traffic than I regret that I haven’t put a damn horn button in lol

Steering wheel has been holding up good. My truck don’t even have tints and it’s still looking great regardless of the south Florida sun.

I think you’ve got to change the column if you have a 99-02

@@REDRUMRx7 vm.tiktok.com/ZMJ7okFQy/ check it out bro it looks clean asf

@@jasonloera3358 yea that looks nice. That’s a 99-02 truck too since it has the cluster like mine. He must have swapped the column.

@@REDRUMRx7 Ima need to look into to that looks too clean. Especially if you get the new gen seats custom mounted as well as the center console

Rico Dragon possibly not but I don’t want the wheel sitting even closer to me. I’m a big boy and I need my space lol. Trimming the plastic wasn’t a big deal to me, it doesn’t even look bad.

REDRUM Rx7 that’s understandable....👍🏾💯

I don’t have a quick release. In the video I show everything I used along with the part numbers.

It’s a Yukon Denali cluster

To be honest I don’t really know because a lot of things changed on these trucks in 03. I know for sure it’ll fit a 99-02.

Yes it should fit no problem.

In the video I show all the part numbers for everything I used.

I never got around to getting a horn button for this steering wheel but it could be easily adapted to work.

I don’t remember off the top of my head but I remember showing them in the video. Watch the whole thing and you’ll find them. 👍🏼

@@REDRUMRx7 thank you...for your response.....happy holidays 👍

@@kismofer1 no problem, happy holidays to you too!

Yea it should

@@REDRUMRx7 thank you bro i appreciate it

@@chronixx710 no problem

Kirbawesome this specific steering wheel didn’t come with a button for the horn, it came with a plug. if I get a horn button from grant it could easily be made to work. The hub kit came with all the components necessary to make the horn work.

Still comfortable even though it looks like is a little closer to the seat?

Kirbawesome yea, it’s only slightly closer than the original wheel.

Can dm me on ig @ redrum_rx7 or just write to me here. I’ll try to help you out.

I do not have a quick release installed but you could install any quick release that’s compatible with a 5 bolt grant wheel.

@@REDRUMRx7 do you have the link for all the parts?

@@4.3andrik93 I bought them from different sources but the part numbers I ordered are in the video. It’s been a few months since I ordered the stuff, sorry for not having the links on hand.

Yoshi Esquire my truck already had the airbag light on.

@@REDRUMRx7 is the hub a 3196?

Yoshi Esquire 5167

YaGoonie 5.3 no I don’t think it will. I believe after 03 they changed to a different shaft spline.

@@REDRUMRx7 darn. Do you know what adapter I would need? I can't find any help with this

YaGoonie 5.3 I don’t, sorry. On Facebook there’s a group called performancetrucks.net, you should ask on there. The people are usually real helpful.

@@REDRUMRx7 yeah I'm a member. I just asked. See if I get answers

YaGoonie 5.3 good luck. Hope you find the info you’re looking for.

The link for what?

Website link for the parts

I ordered off amazon. Was available on prime and I got it the following day.

It does have the ding 🛎

The steering wheel didn’t come with a horn button and I haven’t ordered one for it. The horn could be made to work fairly easily though.

@@REDRUMRx7 Gotcha

Aldo Cabrera yea you pretty much just cut it off. The airbag light is unavoidable regardless since by installing this type of steering wheel you eliminate the airbag anyway.

That’s a great movie

considering the way you chose to spell your name. I figured you had that as inspiration lol

Thank you for part numbers tho. I been thinking about swapping the wheel in my suburban

@@emerybryant no problem. Glad to help. 👍🏼

On a shelf in my laundry room? Lol

@@REDRUMRx7 lol ok

Yea I think this should work for 99-02

Fs Thanks bro

@@fantasmita0371 no problem 👍🏼

I believe grant makes a replacement wheel that allows you to keep the airbag but I’m not sure. Might be worth looking into for you if you’re planning to swap the steering wheel.

Grant offers an updated oem wheel that uses the airbag

Nothing. It just stayed on.

It’s a Yukon Denali cluster

18streetrunnaz I wanna say i paid right around $200 for the setup.

Nice

TreGocraa It’s a cluster from an 01 Denali. All the 99-02 clusters are interchangeable.

REDRUM Rx7 looked like a 03-06 cluster cause of the 120 on the dash

TreGocraa yea the Denali and Escalade clusters go to 120.

REDRUM Rx7 might have to pick one up

TreGocraa i got this one for $60. Every once in a while a good deal pops up but they usually go for around 150ish

But nothing happened. Everybody says the same thing but I’ve done it multiple times.

Why not? I’m not using an airbag anymore so they’re kind of pointless and in the way of the steering wheel adapter.

Why? I’ve had it for a pretty long time now and still no regrets. 🤷🏻‍♂️

@@REDRUMRx7 smaller diameter = harder turns. Plus the quality of a grant wheel like that isn't up to oem.

@@johnwaynebrooks the increase in required effort to turn the wheel is minuscule. As far as the quality of the wheel goes I can only speak on my experience so far. I’ve had the wheel about 7-8 months in my daily driver. Truck doesn’t even have tints so the wheel has been getting beat on by the south Florida sun and so far so good. My original wheel was destroyed so this is a nice upgrade in comparison to the deteriorated wheel I had in the truck before.

@@REDRUMRx7 and I should say that the OEM wheel that's leather wrapped is nicer. The lower quality work truck wheel is junk. I put a grant wheel just like yours on my last Chevy in regretted it after 5 years of having miniscule stiffer turning. I wished I would have gotten one that was the same diameter. Grant does make a bolt on one for your truck that's very nice but I believe it requires you to have steering wheel controls.

@@johnwaynebrooks the wheel was fairly inexpensive so if it falls apart prematurely or anything like that I won’t be too upset about it. For the time being I’m happy with the aesthetics of it. I did see some grant factory replacement wheels but I believe they’re only for the 04+ trucks. Mine is a 99 and I don’t think they share the same spline.