Perhaps this is a great idea for a barbecue and a fire - today we will assemble with our own hands a holder for pans, pots and a cauldron
☑ Nice grill for barbecue - alii.pub/5vbc5e
💡VOTE FORM - MY SITE - 1000ss.ru/
✅ My VK group - diy1000
📌 My Yandex Zen - zen.yandex.ru/1000diy
When you make a pot and pan holder, ask yourself. Why didn't I do it before?
If the rack is hammered into the ground and inserted into its holder, then you can cook over the fire. A long spoon is no longer needed. The fire does not burn your hands. Nothing will turn over and nothing will spill.
I took the idea of ​​Artyom Silin as a basis and improved it a little. His channel - • Video
In the video we will collect, test and see what is good about the holder of pans, pots and cauldrons.
We make a support stand for the barbecue 21 centimeters for a fire 62 centimeters.
To make the fire rack better fit into the ground, we will make it sharp.
Let's drill some through holes to adjust the height.
The barbecue stand can be made removable. I welded the strut from the end - slightly offset.
The grid of the pan holder was welded from a strip 4 mm thick and 2.5 centimeters wide.
The first ring will be made from a strip 80 centimeters long. The length of the strip for the second ring is 55 centimeters.
When paired, they will give good stiffness. Let's weld both rings. We clean it up a bit and trim it in a vice. Four pieces of strip will tie the rings. For the inner ring we will make 4 kerchiefs. Let's set up and grab all the details. If you put the holder of pans, pots and cauldrons on this side, you can put a small cauldron and even cast iron.
The function of the hinge axis will be performed by a rod with a diameter of 20 millimeters. I don’t have a thicker rod, so I’m cheating. I will fuse some metal on the part of the rod that goes into the rack. This is a great idea for a barbecue and fire. The backlash will noticeably decrease. Cut off 2 pieces of an inch pipe and weld them onto the holder of pans, pots and cauldrons.
Almost everything is ready. The final touch is to weld on a piece of the strip. This will be a hook for a cauldron or bucket.
Let's paint with fire-resistant paint. It's raining outside, but it doesn't bother me.
I wasted my time. I updated the brazier, and made a convenient holder with a campfire stand, my friends will appreciate the home-made in nature this weekend.
The fire stand and the holder are quite compact. Can be stored in the grill.
Featuring an idea for a barbecue and picnic fire. A hand-made holder for pans, pots and cauldrons for outdoor recreation will be indispensable.
The handle has several functions. In addition to its direct use, it can adjust the inclination of the pan. If the slope is decent, adjust the legs of the barbecue. Driving them deeper into the ground. Large pans are easy to turn and fit seamlessly. Little ones will not fail either. If necessary, you can put two. Grill grates can be used. Even a ten-liter cauldron fits on the grid of the holder. To hang the cauldron, it is not necessary to turn the holder over, but I will turn it over. The brazier is now on the tile, which is why it sways a little. If you bury him a little in the ground, he will no longer stagger. The disadvantage here is different and it is one. If the grill of the holder gets hot, you cannot lift it higher or turn it over with bare hands.
The cauldron or bucket can be lowered into the brazier as a whole.
My youngest daughter will cook scrambled eggs with tomatoes and lard. The recipe for scrambled eggs with tomatoes and lard is not complicated. Put bacon in a hot frying pan. Fry a little, on both sides. Then onions. After the onions are fried, put the tomatoes. Stewed tomatoes, add eggs and salt to taste. Put the dill a few minutes before the end of frying. On the grill, there is enough space for the grill grate. Agree, scrambled eggs look delicious. That's all dear friends, thanks for watching. Don't forget to like or dislike. And subscribe to my channel. And don't forget to click on the bell so you don't miss new videos.
Now you know how a great idea for a barbecue and a fire was implemented with your own hands. This is the best holder for pans, pots and cauldrons. Do it yourself. The video for you was prepared by the author of the channel 1000 DIY's and Advice - 1000 DIY AND TIPS See you in new videos!