A Guide To Wet Sanding, Compounding & Polishing Paint job | Step by step | Scale model | 1/24

A Guide To Wet Sanding, Compounding & Polishing Paint job | Step by step | Scale model | 1/24 | ASMR

Рет қаралды 16,282

Жыл бұрын

Hey guys, today’s video is going to be a bit of a guide on wet sanding scale model paint job, but I’ll also be briefly covering compounding and polishing so you can see the whole process from start to finish. Please enjoy
and don't forget to subscribe my channel for more video.
/ @omgscaleworks
Facebook : / 124omg
Instagram : / 124omg
-------------- Music in this video --------------
The Holiday by So I’m An Islander | soimanislander.bandcamp.com
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...

Пікірлер: 96

@robpierce4712 2 ай бұрын

It simply amazes me how time after time you can achieve such a perfect finish without missing a speck of dust or grit. Keep up the great work!

@OMGscaleworks 2 ай бұрын

Thank you so much!

@BrydensModelWorks Жыл бұрын

A very helpful tutorial Oni👍, should give a good idea to people whom are wanting to achieve mirror shine on their models! I appreciate the modelers who take the extra time to do this since the majority of the merit on a model car is the body itself. I see a lot of modelers that leave their car with orange peel and using Rust-Oleum paint and stuff on the body, especially the ones that don't make jdm or exotic cars.😢

@OMGscaleworks Жыл бұрын

Thank you so much Bryden! ^^

@wadep420ify 5 ай бұрын

Beautiful

@stevenanderson236 Жыл бұрын

Thank you

@stevecampbell6454 7 ай бұрын

Thanks for answering many questions that I already had.

@OMGscaleworks 7 ай бұрын

You’re welcome! I just want everyone enjoy with scale model making and want to see everyone do a beautiful work.

@RuweSaare Ай бұрын

Level of the clear coat was already perfect before the wet sanding and polishing :D

@OMGscaleworks Ай бұрын

Yeah, It’s shine but I think it’s not smooth enough. 😃

@RuweSaare Ай бұрын

@@OMGscaleworks I wish I could get a clear coat in your level :)

@KarlScaleModeling Жыл бұрын

Great work, very detailed tutorial and easy to follow. Thanks for the share.

@OMGscaleworks Жыл бұрын

Thanks you so much Karl! ^^

@bucasso Жыл бұрын

That‘s wonderful！

@OMGscaleworks Жыл бұрын

Glad you like it!

@bquattrog Жыл бұрын

Stunning results, thank you for showing us the process. I followed this on my last model (hand polish though) and it came out amazing. 👍🏻🙏

@OMGscaleworks Жыл бұрын

I’m feel so good that my work is useful to you. Thanks a lot to you too for your following.

@michaelhintzmikesminiature1812 Жыл бұрын

Great tutorial. Thanks for sharing

@OMGscaleworks Жыл бұрын

Thanks for your visiting too Michael.

@walkontrails1076 Жыл бұрын

Nicely done, great job.

@OMGscaleworks Жыл бұрын

Thanks a lot bro! ^^

@Elbarto571 Жыл бұрын

Glad i found your channel 🙏🏻

@OMGscaleworks Жыл бұрын

Welcome aboard! 😃

@burcigdin Жыл бұрын

Thank you man for the video 👏🏻🙏🏻💐

@OMGscaleworks Жыл бұрын

Thanks 2 U for watching my video too!

@alexsmcv84 Жыл бұрын

Great tutorial!

@OMGscaleworks Жыл бұрын

Glad you like it!

@eduardoj30 Жыл бұрын

Thank’s for the video. I have a dremel Stylo but I didn’t know the correct speed for use.

@OMGscaleworks Жыл бұрын

Thanks 2 U for watching my video too!

@color63ch Жыл бұрын

wow amazing!!👍

@OMGscaleworks Жыл бұрын

Thanks 2 U for watching my video!

@330.Custom.Diecast Жыл бұрын

Nice video. Do you wash the polishing pad with water afterwards? Soap and water? Thx.

@OMGscaleworks Жыл бұрын

Thank you ,Yes I washed the pad with dishwashing liquid

@thomasb3893 Жыл бұрын

Fantastic - how do you avoid sanding thru the paint on the edges and corners?

@OMGscaleworks Жыл бұрын

Actually I didn't sanding down to the edge at all. Generally at the edge there will be no problem with the orange peel effect.

@mariuszddd3114 6 ай бұрын

I have the same sponge set but polishing did not finish extra shiny. I used green sponge(coarse) with coarse compound - blue sponge with fine compound and finally extra fine sponge with car finish conpound mazerna 3000. What I have done false?

@arthurhickman045 Жыл бұрын

Do you have a link to where you bought the sponge polishing kit? Also, what wax would you recommend if I wanted to make a high gloss P 51 D mustang?

@OMGscaleworks Жыл бұрын

You can find them in Amazon just search "Mini Polishing Pad" and you can use some real car wax such as 3M ,Meguiar's or Chemical Guy.

@jorgenakamura2043 Жыл бұрын

Great tutorial! What brand/model of dremel do you use? Couldn't see if it is wireless.

@OMGscaleworks Жыл бұрын

Thanks a lot Jorge ,this is Dremel Stylo+

@jorgenakamura2043 Жыл бұрын

@@OMGscaleworks Thanks!

@t-one234 Жыл бұрын

Where did you get those polishing pads? Id love some for my Dremel.

@OMGscaleworks Жыл бұрын

You can find them in alibaba just try this keyword “Mini polishing sponge pad” Hope you can find them!

@tcandle695 Жыл бұрын

Nice. Can you share the link for the tool heads you used to polish the model? I want to buy one. Thanks.

@OMGscaleworks Жыл бұрын

Thanks ,I got it from Aliexpress try to use this keyword “Mini polishing pad”

@johnathan133 Жыл бұрын

Do you change out the water for each grit of sandpaper?

@OMGscaleworks Жыл бұрын

Yeah ,must do it for the best result!

@marcelofloripa26 Жыл бұрын

I was thinking about buying this Dremel tool. What speed do you use for polishing? I think 5000rpm is too high for polishing

@OMGscaleworks Жыл бұрын

I'm not sure how many rpm it is. Usually, I use the lowest speed to apply the compound evenly over the workpiece. and then add a little more speed (no.2) to polish.

@RuweSaare Ай бұрын

Did you also sanded and polished side ribs on the doors? And smaller areas like pillars?

@OMGscaleworks Ай бұрын

I did not do polishing in small area. I think it's not necessary.

@RuweSaare Ай бұрын

@@OMGscaleworks Thank you for your answer!

@bigben8057 Жыл бұрын

What is the minimum speed of the drill you set for polishing?)

@OMGscaleworks Жыл бұрын

I used the lowest speed of this Dremel.

@aldovillegas8774 Жыл бұрын

Where can i buy the polishing sponge that you used with Dremel?

@OMGscaleworks Жыл бұрын

I got this from alibaba you can use keyword “Mini polishing sponge pad”

@aldovillegas8774 Жыл бұрын

@@OMGscaleworks thanks 😊

@Over9000Chainz Ай бұрын

so the process is to paint and clear coat before starting wet sanding? do you clear coat again after polishing?

@OMGscaleworks Ай бұрын

No, I did not applied clear coat after polishing. If you do that It will be like starting the process all over again.

@Over9000Chainz Ай бұрын

@@OMGscaleworks got it. Thanks so much for the help! Great video 🙏🏿

@Rjacket Жыл бұрын

Do you have a link to the sponges? I can only seem to find 3" on Amazon?

@OMGscaleworks Жыл бұрын

Try this link a.co/d/1t5QzJd

@corrioliseffect Жыл бұрын

Okay, but does it stay shiny? Like, after years on display? Or, do you have to re-wax it every 3 years or so?

@OMGscaleworks Жыл бұрын

For the durability of shine ,I think it probably depends on the clear coat you use and thinner mix ratio.

@deanlewis8083 Жыл бұрын

mine have held their shine over 20 years and going. depending on how they are stored you may have and issue with dust. now with bare metal foil (BMF) i have some that experienced some peeling over many years. not real bad but noticeable. maybe the adhesive gives out over time. Also i never clear coat my BMF.

@bigben8057 Жыл бұрын

Please write a tool from Dremel do you use for polishing?

@OMGscaleworks Жыл бұрын

It’s “Mini Polishing sponge pad” I found them from alibaba.

@AP12BG 5 ай бұрын

How do you remove the compound that stays in the door and bonnet crevices

@OMGscaleworks 5 ай бұрын

I used soft paint brush with warm water. But if it does not come off you can use panel line accent to make it black ha ha!

@chalermpolplianthiangtham6128 Жыл бұрын

รีวิวสว่านไร้สายหน่อยครับ ใช้ของยี่ห้ออะไรครับ

@OMGscaleworks Жыл бұрын

Dremel Stylo+ ครับ ตัวนี้ดีมากครับ เคยลองของจีนมาหลายตัวแล้วไม่เวิร์ค จบที่ตัวนี้เลยครับ

@pscustommodel Жыл бұрын

ขอนำไปฝึกวิยายุทธนะครับ

@OMGscaleworks Жыл бұрын

จัดไปครับ

@ricecrispeee3367 5 ай бұрын

Do you wet sand and polish after clear coat?

@OMGscaleworks 5 ай бұрын

Yes sir!

@Enlapanlima Ай бұрын

How many layers of clear coat until it's safe to start sanding it like in the video?

@OMGscaleworks Ай бұрын

Depends on the smoothness of the clear coating layer. If it's already smooth, you don't need to spray it too thick.

@frederickdominguez4829 4 ай бұрын

Can this process be used on paint that has not been cleared

@OMGscaleworks 4 ай бұрын

I think it can be done. However, you may need to apply the paint thicker than normal.

@1234554321ep67890 4 ай бұрын

Who makes the 'compound' you use?

@OMGscaleworks 4 ай бұрын

Raditz Studio, my local brand.

@johncater7861 7 ай бұрын

Could you tell me the base paint? Is it lacquer, enamel, water-based etc? Thanks.

@OMGscaleworks 7 ай бұрын

Most of paint I used with airbrush is laquer based.

@johncater7861 7 ай бұрын

@@OMGscaleworks many thanks

@ericohman 5 ай бұрын

@@OMGscaleworksdid you clear coat prior to polishing? From the start of the video, does the model have been clear coated?

@OMGscaleworks 5 ай бұрын

@@ericohmanYes already applied clear coat before do wet sanding.

@Fish-79 Жыл бұрын

Can you give me the name of the camera configuration you are using?

@OMGscaleworks Жыл бұрын

I used only my iPhone 7 for shooting in every video ,no special setting just point and shoot.

@smittysmith4746 3 ай бұрын

Where to buy pads?

@OMGscaleworks 3 ай бұрын

Try to find “Mini polishing pad” in AliExpress

@dvdw_graphics_crafts Жыл бұрын

I didn't see any orange peel effect to begin with ; )

@OMGscaleworks Жыл бұрын

You’ve got me ha ha.

@dvdw_graphics_crafts Жыл бұрын

@@OMGscaleworks 0:30 really hard to see; i thought it was like, pretend there was orange peel effect. I watched again at 1080p, barely saw any still. :D

@THEpandora100 Жыл бұрын

Wow! 🔥 Manual (hand) polishing does not achieve fine...

@vincentlussier8264 3 ай бұрын

Yes it does! I get high polishes like his all the time by hand ! It's knowing how to use the right sanding abrasives and polish compounds . It's practice but it works. Electric polishing tools can burn through the paint to primer if you're not careful and their speed can flip the body out of your hand also. Very risky and both ways work but hand polishing is much safer!