A Look at the Ansys Mechanical Fatigue Module

A Look at the Ansys Mechanical Fatigue Module | Ansys Tutorials

Рет қаралды 13,476

Күн бұрын

Metal fatigue is a common cause of structural failure brought about by material damage caused by repeated loading. Fatigue occurs in three stages; crack initiation, crack propagation, failure.
This webinar will explore the capabilities of the Fatigue tool available in the ANSYS Mechanical application. which focuses on predicting the number of cycles, or time, to crack initiation based on stress-life and strain-life techniques.
The Webinar will look at, using presentation and demonstrations, the application of; constant amplitude, proportional loading; constant amplitude, non-proportional loading; and non-constant amplitude, proportional loading cyclic conditions when applied to calculation of fatigue damage and component life.
At EDRMedeso, we enable our customers to design better products, reduce risk, and accelerate time to market. We are committed to driving innovation by providing leading simulation technologies delivered through knowledge transfer.
Follow our social media!
LinkedIn: / edrmedeso
Instagram: / edrmedeso_s. .
Facebook: / edrmedeso
X: / edrmedeso
Want to know more about EDRMedeso? Please visit our website: edrmedeso.com

Пікірлер: 9

@naldofrasco1467 2 жыл бұрын

As always, another brilliant in depth dive into Ansys capabilities. Thank you so much for your efforts. Always appreciated.

@EDRMedeso 2 жыл бұрын

Thank you for your lovely feedback Naldo!

@babunamboothirik_RenewTherm Жыл бұрын

Good content, thank you

@DavidShort-ih3vl 3 ай бұрын

Brilliant video! Thanks a lot for sharing. I am very concerned to hear that the fatigue tool cannot handle biaxiality. Could you explain this in some more detail, is it the mean stress correction theories which are implemented that are not suitbale for biaxiality? Many thanks!

@adrian6790 2 ай бұрын

Should stress corrected stress concentration factor by q be considered in Kf? Or Anysys will calculate it by itself.

@mahdimusapour6744 Жыл бұрын

😍😍

@federicoololo3617 8 ай бұрын

In the case of frictional contact in the model, how to set the two load enviroments?

@akosaonyejekwe7388 Жыл бұрын

Amazing tutorial. Can you please share the model file?

@DavidShort-ih3vl 3 ай бұрын

Brilliant demonstration but I am very concerned to hear that the Ansys built in fatigue tool is not accurate for biaxial cases (and hence the majority of real-world problems). You say that the predictions should at least be conservative but still I am not filled with confidence! Could you explain a bit more about why it is not accurate please? Is it the implemented mean stress correction theories that are not valid for biaxial stress states?