A MUST HAVE FOR CAMPING / Build a Water Transfer Pump / SAVE $$$ / SUPER QUIET/SUPER COOL

Рет қаралды 24,042

Жыл бұрын

We build a DIY water transfer pump similar to an Adventure RV Water transfer pump. But we save over $500!
I make some improvements to the original pump I built several years ago by adding a switch and heavier duty banana clips to supply power via an Anderson plug.
We use clear re-inforced tubing to prevent any cavitation during pump operation as well as brass fittings for a secure and stable build.
It's water tight and compact and easy to store. It will transfer water into your camper so you don't have to do any heavy lifting of water jugs.
This can also be used as a camping shower if set up in a different configuration. We don't do that but we do build the pump. It's so cool in the case.
The bill of materials for this DIY build is at our Amazon store (see link below). Easy reference for the parts list.
RV Living at it's best.
#rvlife #spacecraft #fulltimerv #customrv #hdt #whataburger #camper #campendium #floridaflywheelers #wanderlust #semitrailer #semitruck #volvo #semi #customtrailer #boondocking #thousandtrails #rvhauler #adventure
RV Camping is where we hang out.
We like to Switch it Up between resorts, campgrounds and boondocking spots as we travel around America.
Our journey is the destination. We want to share in our experiences in discovery of What's Next.
I get my music from:
Epidemicsound.com
Amazon Shop (no extra charge to you)
A convenient way to see (or buy) the items you see in the video's which may help in your adventure.
www.amazon.com/shop/bigtruckb...
We use the TSD card for diesel fuel and save a bundle each time we fill up our Big Rig. We also use it to fill up our Onan generator.
The big blue boards (XL version) we use sometimes to get us "un-stuck" is from:
Gotreads.com
Vehicles:
2016 Volvo VNL780 "Voyager"
2016 Smart fortwo "Pathfinder"
2019 SpaceCraft Custom built semi-trailer 5th wheel "Orion"
2023 Thor Magnitude XG32 Class C "Curiosity"
2017 Jeep Wrangler Sahara "Artemis"
Power system:
3250 watts of solar with Panasonic panels
30.1 KWH of Lithium batteries
2- 4K watt Magnum Inverters deliver power as if we are on shore power
2- 4K watt 240v Cotek Inverters deliver additional power for our LG Mini split HVAC and stove
Coachnet is our roadside assistance company we use but hopefully we don't use them too often. LOL
We are not sponsored by Whataburger but I do enjoy them anytime I can get my hands on one. They used to be just out of Texas but they have expanded.

Пікірлер: 118

@KeenanModica Жыл бұрын

This is the best RV series on KZfaq. The DIY gadgets are frosting on top.

@bigtruckbigtravels Жыл бұрын

Thank you very much! Spread the word! LOL. 😂😎 I try to sprinkle in a few of the useful ones I do....the failures I toss in the trash! LOL. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊 Stay safe my friend.

@samv42 4 ай бұрын

Actually, you didn't build a water transfer pump. You purchased a water transfer pump and installed it inside of a waterproof casing, adding hoses and electrical switch.

@futrade1 Жыл бұрын

Great job on the pump, love your style of how you put a unit together, all nice and neat and not cobbled.

@bigtruckbigtravels Жыл бұрын

Thanks Ed, I'm definitely not real mechanically inclined but I enjoyed the project. Yeah, it helps me if my stuff is laid out in an organized manner. Appreciate your comments.

@jeannealex2560 Жыл бұрын

Hi guys...that was a very good idea...we use something similar...however I like your idea better...stay safe..thanks for the video...J&A

@bigtruckbigtravels Жыл бұрын

Hey J&A, glad you found it useful. I really like it for the compact features and the easy storage. It keeps it clean and neat...but I really like the switch! Safe Travels, stay warm. Thanks for watching.

@williamsneedjr4129 Жыл бұрын

Great job AS always

@bigtruckbigtravels Жыл бұрын

It was a fun project and took less time than I thought to complete. I also didn't have as many "extra" parts left over than I thought too! Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@markellars9245 Жыл бұрын

Yes David I did recognize the compression fittings. I always use that ounce of prevention.

@bigtruckbigtravels Жыл бұрын

oh yeah! I like to double up on any ounces of prevention that's possible.

@mikeallensonntag Жыл бұрын

That's awesome the pump didn't even need primed. Ima have to build one of these. In my class b I can siphon to fresh water tank using the sanitizing valving using motorhome water pump the issue is unless it's primed it won't pull water from a container. With this contraption I would be able to buy let's say 5 gallon jug of water at Walmart and feed fresh water tank.

@bigtruckbigtravels Жыл бұрын

Hey Mike, this needed a little help since I put some water in the hose first. I always do that to reduce any potential wear and tear on the pump. But it was sucking the water out of that bucket! It's really quiet and easy to store. I really like mine...that's why I built another one! Thanks for the comment and appreciate you watching the channel. 😎

@chemcody5119 Жыл бұрын

Nice job on version 2.0 David. Looking forward to your Alaska videos!

@bigtruckbigtravels Жыл бұрын

Thanks. I was real pleased with how it turned out...and I used all my parts that I purchased! Very few leftovers. LOL. Alaska should be an adventure. Glad you're coming along on the journey. 😎

@markmorrison4730 Жыл бұрын

Well done sir! I've thought about doing this. I really like your second version after learning from the first.

@bigtruckbigtravels Жыл бұрын

Thanks, Mark. Yes, I wanted to make some improvements in a slightly smaller footprint for the pump. I like the switch...it's just cool. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@Keithhawkins Жыл бұрын

Very ingenious. I’m sure will come in handy!!!!

@bigtruckbigtravels Жыл бұрын

I really like it, Keith. I use my other one all the time since we boondock a lot. Being in a case keeps it organized and easy to carry. Thanks for the comment. 😃

@ptwhd Жыл бұрын

Thanks for sharing 😊

@bigtruckbigtravels Жыл бұрын

You're welcome, Peter. We enjoy sharing. I just didn't see a lot of videos out there on this type of very useful DIY so I decided to do one. Glad you liked it. 😊

@raven7068 Жыл бұрын

That's a really good idea! Always have an extra pump around in case yours go out on the RV and of course for the idea that you have transferring water back and forth.

@bigtruckbigtravels Жыл бұрын

Yes, I love the pump for the water transfer aspects of it but I also really like the thought of having a useful backup device too!

@deanwoodard4830 Жыл бұрын

Great show as always

@bigtruckbigtravels Жыл бұрын

Thanks Dean, appreciate the comments and your time watching the channel. 😊

@williamriley3125 8 ай бұрын

this video is great and aggravating at the same time. i wish there was more explanation and direction on which fittings go where. Also, a lot of the fittings you link to aren't for potable water due to lead.

@bigtruckbigtravels 8 ай бұрын

Sorry, William. I really did this as a guide and idea video. My original intention was not to do a step by step instruction of how to build it but there are parts of the video which do give you that impression. I hope in some way it does help. Thanks for watching.

@skateshop20 Жыл бұрын

Great upload. I’m a newer viewer and turned on notifications by the 2nd video I’ve watched, keep up the great work.

@bigtruckbigtravels Жыл бұрын

Thanks and glad you found us! We enjoy the RV travel lifestyle and like to share our experiences so that others may benefit. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@Banksplayz Жыл бұрын

wonderful. Just watched the video.

@bigtruckbigtravels Жыл бұрын

LOL. Thanks for the comment. I didn't see an DIY for this on YT so I decided to do it myself to help others who may want to save some money. I couldn't believe how much they want now to purchase one. It has gone up nearly double from several years ago. Appreciate you watching the channel. 😊

@RVLifeInRetirement Жыл бұрын

Yes, I bought the $400 one you mentioned. I haven’t used it yet, maybe I can sell it for $550? Lol. I should’ve made my own like you did. Great job!

@bigtruckbigtravels Жыл бұрын

LOL...hmm..make a little money on it? It was a fun project but you have a nice working one so it's all good. It's great to have one so that is the main thing. Appreciate your comment and thanks for watching the channel.

@scottmartinezguitarandbass 4 ай бұрын

Thank you!

@bigtruckbigtravels 4 ай бұрын

You're welcome. Thanks for your time to watch the channel.

@miltonkchambers Жыл бұрын

Great job! I totally could have used it several times in the past, thanks to bad planning, lol...

@bigtruckbigtravels Жыл бұрын

LOL...if we didn't have "bad planning" then somedays we'd have no planning at all! 😂🤣It has gotten me out of several jams and just makes boondocking so much nicer and more fun. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@tiffanyhsiao2294 Жыл бұрын

Very helpful and thank you 😊

@bigtruckbigtravels Жыл бұрын

Thanks Tiffany, I hope you get a chance to try it out someday. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@lanceballew2304 Жыл бұрын

great idea this is my next project really nice job

@bigtruckbigtravels Жыл бұрын

Thanks, Lance. It works great and packs nicely. Fun project. Appreciate your comments.

@steverobbo55 Жыл бұрын

Excellent well done 👍👍🇦🇺

@bigtruckbigtravels Жыл бұрын

Thanks, Steve and Hello down under. I really liked the project and didn't see any on KZfaq for this DIY so I thought it would be good to share. Glad you liked it and hope you find it useful. 😊

@glenn6567 Жыл бұрын

Daves a handy guy

@bigtruckbigtravels Жыл бұрын

Most days🤔😊😂 .....Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@chasp044 Жыл бұрын

Good info! If you are looking for another macerator pump, Rec Pro carry's their own brand. You only have to adapt a garden hose fitting to the discharge! They are about the same as a Flo Jet except for price. The Rec Pro is $140.00, with free shipping, I think. Cheers!

@bigtruckbigtravels Жыл бұрын

thanks Charlie. I think I'm going to transfer the FloJet to Curiosity but I'll keep that in mind for a possible future replacement. Hope to see you guys in a few weeks. Stay warm down in SC. Say "hi" to Yvonne for us. 😎😊

@HSTWXMAN Жыл бұрын

I need one:)

@bigtruckbigtravels Жыл бұрын

I love it. Thanks for the comment and appreciate you watching the channel. 😊

@rwmcmullin Жыл бұрын

FYI - that’s an SAE plug not an Anderson plug. I only mention this for those that may be thinking of building this and aren’t familiar with the difference…

@bigtruckbigtravels Жыл бұрын

Thank you and you are correct. I misspoke about it. I put it on the Amazon store so that anyone could reference it more easily. Appreciate your input.

@misteraon Жыл бұрын

Nice build. I recently picked up a 60 gallon bladder and will be picking up a duplicate water pump to the RV. Was planning to put it in a box at some point and this provides some good inspiration. FYI those DC connector are not Anderson connectors…just quick connectors. They are commonly used by Motorola but are pretty standard. I do like the real Anderson PowerPoles (red/black) as they are not only polarized but are also genderless. Makes it super handy when making up an assortment of connection cables and extensions. They are popular in the Ham Radio groups.

@bigtruckbigtravels Жыл бұрын

Thanks for the correction. Yep, they are a 2 pin molded connector. I had Anderson on my mind because I was looking at another project down the road which dealt with the RV battery connections. Appreciate helping to keep me straight. I really like the pump in a case because it's easier to handle, store, keeps it clean and all the parts are with it. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@misteraon Жыл бұрын

@@bigtruckbigtravels yup Anderson also makes the higher amperage connectors as well (often gray) that are also genderless/hermaphroditic. Look into the smaller ones with red/black housing. They can come with 15/30/45 amp pins.

@misteraon Жыл бұрын

kzfaq.info/get/bejne/mMB4m5afvL7Ym6s.html

@markellars9245 Жыл бұрын

Hi David and Sondra I noticed you did not use any teflon tape on your threads. I always use it to prevent leaks.

@robertdragoff6909 Жыл бұрын

Leaks? What leaks? LOL! You’re right, but the pipes looks nice and tight

@JamieStuff Жыл бұрын

Those look like hose fittings, which have a rubber washer inside to stop them from leaking.

@bigtruckbigtravels Жыл бұрын

You are correct, Jamie. They are compression fittings which provide a seal with the help of that O ring inside. Also, the PVC threads on both male and female help to eliminate any leaks. Thanks

@bigtruckbigtravels Жыл бұрын

Nice and tight, for sure. Leaks?...I got no leaks! 🤣

@bigtruckbigtravels Жыл бұрын

Hey, Mark, I did use some teflon on the brass threads but with the connections to the pump they are a compression fitting with a gasket inside which prevents any leaks. No leaks! Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@piushorning4869 Жыл бұрын

back in the old days of camping, I started with a tent and when I bought my first trailer I used a boat bilge pump to transfer water from 6 gallon jugs to the trailer water tank with an on/off switch. primitive but it worked great

@bigtruckbigtravels Жыл бұрын

That was way ahead of the times back then! That's very cool and would work great. This was a fun project for me and it was interesting. Thank you for the comments.

@abecoulter8550 7 ай бұрын

should get an acumulation tank

@bigtruckbigtravels 7 ай бұрын

Great idea! We have one and works fantastic! Thank you. 😃

@tkevin849 8 ай бұрын

gllad to know similar product ,we protuct a full fuction pump kit ,the box type

@bigtruckbigtravels 8 ай бұрын

Very nice. I really like my setup. It does a great job of transferring water.

@jamesglenn520 Жыл бұрын

Any idea on the amount of flow restriction having the 2 90° on the pump? Seems like the other unit would pump faster 🤔

@bigtruckbigtravels Жыл бұрын

No idea, James. I don't believe there is any appreciable amount of degradation to flow with the 90 degree elbows. Probably a little but I haven't noticed a difference. Upon reflection, if I did another pump I would install as I did the first version (straight tubes) but I would add the switch. Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@bennyrstafford1678 Жыл бұрын

Great job. I will definitely be building one myself. I did not see the brass hose fittings that connect to the bulkhead fittings. Which did you use? Thanks. Safe Travels.

@bigtruckbigtravels Жыл бұрын

Very true. I think I got those at Lowes but here's a start: STURGID 25034 Brass Male Garden Hose Thread Swivel with 3/8" Barb x 3/4"GHT, Includes Stainless Steel Clamp 2 Pack of Anderson Metals-07046-0612 Brass Garden Hose Swivel Fitting, Connector, 3/8" Barb x 3/4" Female Hose

@bennyrstafford1678 Жыл бұрын

@@bigtruckbigtravels Should those be 1/2" Barb. The Hose and fittings on the pump are 1/2" barb?

@bigtruckbigtravels Жыл бұрын

@@bennyrstafford1678 let me double check. I thought the OD was 1/2" but the ID was 3/8".

@bigtruckbigtravels Жыл бұрын

@@bennyrstafford1678 Yes. The hose is 1/2" ID and 3/4" OD. The barbs should be 1/2".

@kenhoward4151 Жыл бұрын

You don’t feel the need to fuse the 12 vdc? It would be easy to do.

@bigtruckbigtravels Жыл бұрын

hey Ken, there is an inline fuse on the power cable. It is in a molded black case with a cover so it is very hard to see. Thanks for the comment. Appreciate it. 😎

@byronewhite 10 ай бұрын

I am building one right now but adding a built in 12v 12amp Li po battery so I dont have to chase down 12v.

@bigtruckbigtravels 10 ай бұрын

Ok, Byron, that is cool and very flexible. Good idea!

@johngorczynski2139 Жыл бұрын

Hey thanks for the great video! I am curious , if you were to attach a garden nozzle to the out spout would you be able to turn it on and off? Or would the pressure build too much and fry the motor? Thanks!!

@bigtruckbigtravels Жыл бұрын

Hey, John, this pump is not a demand pump but you could do that with another model pump (demand).

@johngorczynski2139 Жыл бұрын

@@bigtruckbigtravels thank you !!

@DJMEDIC671 3 ай бұрын

Do you think the pump would get to hot in the box if it would to be used to pump water to a pressure washer for detailing. The harbor freight pump would be to loud in an enclosed 6 x 10 trailer. On top of that the videos I’ve seen on the harbor freight pumps they get warm and I would need to run a bypass back to the tank. So the pump don’t burn up.

@bigtruckbigtravels 3 ай бұрын

No. As long as water is flowing it should be good but it also depends on how long it works. Mine goes for about 20 minutes or so and is still cool.

@DJMEDIC671 3 ай бұрын

@@bigtruckbigtravels I would assume I would run it a little longer. But I guess I can connect it to a wireless power plug and the just turn it back on when I need water after the main wash.

@MikeJones-wt8mv Ай бұрын

David- I was inspired to attempt to build my own Water Boy and was needing some clarification on some of the items from your Amazon page/ store. For the water connectors and covers listed, there seem to be more items than actually used in the video. Can you please specify exactly what items were used in the video? Also, wanted you to know that I am attempting to build mine to accept both the alligator clips you used and a 12V male adapter that will fit into a 12V female that currently goes to my portable power station, so I don't have to hook to a battery terminal if one is not close enough to do so. Once again, thanks for the inspiration and wish me luck...I may need it! Love the channel and hope you and Sondra continue to have Great Travels!! BTW- Is there a sticker for completing this project??

@bigtruckbigtravels Ай бұрын

Hey, Mike, no sticker but a big " Attaboy"! Let me look at the pump. I was thinking a building or a little differently so the reason for multiple parts...plus some package counts were more than I needed. Let me look tonight. Can you send me an email?

@MikeJones-wt8mv 25 күн бұрын

@@bigtruckbigtravels do you happen to get my email I sent regarding the water boy build?

@killeregg5514 Жыл бұрын

Can I use the Jackery 500 for this?

@bigtruckbigtravels Жыл бұрын

The Jackery 500 only supports 7 amps for 12vdc. This pump uses up to about 15 amps dc. A different pump would be better.

@scottmartinezguitarandbass 4 ай бұрын

So I'm looking for that waterproof on/off switch, I pretty much have everything else, but it isn't on the list anywhere. Can you help?

@bigtruckbigtravels 4 ай бұрын

Something like this, Scott. a.co/d/a5pJFzw

@atpphotography 5 ай бұрын

Have any issues with the pump overheating? No need for a vent on the case, or do you only run it while open?

@bigtruckbigtravels 5 ай бұрын

No issues on overheating. It usually only takes me about 15-20 minutes of pumping to empty our tank on the truck so that's as long as I've run it. I usually close it while running and the water helps to keep it cool as well. Plus all my connections are rated for 20 amps so as to insure the electrical side is sized properly.

@atpphotography 5 ай бұрын

Good to know. Thanks for the reply!

@LeonTheLion-777 11 ай бұрын

Looking for a quiet water transfer pump to circulate a cold plunge tub.. any units you would recommend that are quiet ?

@bigtruckbigtravels 11 ай бұрын

I've got this one on the Amazon store, Lonnie for reference. It seems quiet to me. amzn.to/3rRL5OZ

@LeonTheLion-777 11 ай бұрын

Thanks man... so funny I was at camping world and that is the exact u it I picked up 💪🏻

@bigtruckbigtravels 11 ай бұрын

@forshizzleinthehizzl lol...great minds think alike!

@jasoncole7367 8 ай бұрын

This might sound stupid but did you conect this directly to rv battery

@bigtruckbigtravels 8 ай бұрын

Great question! I have a 12v power port in my water bay and use the banana clips to power the pump. This is powered from the batteries in my RV. We have 30 kwh of lithium. This may answer a few questions. kzfaq.info/get/bejne/nbSjmKurrd_Ihqc.htmlsi=kRC6XFqwqDyem4zM

@adamfenech132 7 ай бұрын

very cool, but why not just buy one of the $50 transfer pumps that are available? I am considering this myself and I think the benefit of this route would be the fact that it can run dry and self prime? And/or these RV pumps are so reliable...? Thanks!

@bigtruckbigtravels 7 ай бұрын

A few reasons for this project. The case is easy to carry and store. The pump is more powerful and will push more water to the tank. The pump is definitely more reliable (I started with the $50 transfer pump and it was not very good and failed after 1 year of use).

@adamfenech132 7 ай бұрын

@@bigtruckbigtravels Awesome, thank you that is what I was thinking. Do you ever have it lift water from dry or is it always primed? I have an auxilary tank thats below my sprinter (in the spare tire) and I would like to plumb something like this above it inside the van but im not sure if it would wear out running dry momentarily (and lifting the water 2ft). vs having it mobile like this and having gravity essentially prime the pump on its own before transfering it up to the main tank...

@bigtruckbigtravels 7 ай бұрын

@adamfenech132 this pump works much better primed.

@bobabooie6389 Жыл бұрын

👍🇺🇲

@bigtruckbigtravels Жыл бұрын

Thanks for watching and appreciate the comment. Glad you're along on the journey.😊

@bobabooie6389 Жыл бұрын

@@bigtruckbigtravels 👍

@ahowl7mx 11 ай бұрын

So... What's the model of the pump? Seaflo?

@bigtruckbigtravels 11 ай бұрын

Yes, a Seaflo. The model is on the Amazon store idea list. Link in the description.

@MikeJones-wt8mv 4 ай бұрын

How much would you charge to build me one of these??

@bigtruckbigtravels 4 ай бұрын

😆 hey, Mike. Hmmm... I'm kind of expensive... the going rate is a full Whataburger meal (Sweet & Spicy Bacon cheese) with a large drink. 😋

@MikeJones-wt8mv 4 ай бұрын

Well, we can do that and then some. Just let me know.

@MikeJones-wt8mv 4 ай бұрын

I did have a question regarding your build. Would it be possible to replace the alligator clips that go on a battery terminal for a male 12v cigarette lighter plug? I wanted to have it go in the Fe mail 12 V receptacle that goes into my NOCO charger for power. Just curious of your thoughts.