Loved the vídeo, i'm so hyped to purchase the zigbee version of the sonoff mini!

Wow, always happy to view your video. Thanks for your sharing.

Great! I spent ages flashing my wifi Minis with Tasmota (and bricking half of them in the process) and now Sonoff come out with the ideal alternative which would slot into my extensive Zigbee mesh. It'll be interesting to see how these work with ZHA, if you have that.

Hello. Good job I switch to Zigbee since my bad experience with a DW2 door switch using obsolete 802.11b ... not working with Ubiquity AP. Anyway I would like to know if the ZBMINI can be powered with DC. I just need a device to monitor my garage door open/close status so I would power it with DC with a Reed switch. To your knowledge, is it possible ?

Hello, thanks for this review. I would like to know if the Sonoff ZB Mini has compatibility with the Google Assistant... I mean: can I say "OK Google turn on / turn off Sonoff ZB Mini" etc. Thanks in advance.

Hi! Other than lighting, can this be used with appliances like air conditioning units? Thanks! Helpful vid!

Can I check if the zbmini functions as a zigbee router? I have the zbmini connected to the sonoff hub and tried to connect a door sensor (also sonoff) but some how it is missing a 3 meters. Even when moving the zbmini 4 meters closer to the the door sensor it is still missing 3 meters. So I was thinking that maybe the zbmini isn't working as the router, but I don't know how to check this.

Do you if you setup the swicth and then connect with an Amazon echo device with a zigbee hub built in, do you still need the app installed on your phone?

I'm planning to use this to make my current switches smart. Can this device also control external smart bulbs? Or is it just capable of switching mains?

Hi can I use it to make my plug (socket) smart ? Or is it only usable as a switch for light ? Sorry if the question is stupid but I’m new to this smart home stuff

It also works with sonoff zigbee 3.0 usb dongle plus BUT you have to flash firmware !

Thanks for video. 1. If wall switcher is on then is it poss switch off light with app ? 2. If light was switched off with app then is it poss switch on back with wall switcher ?

Very good video. Sir does it has power recyle memory function ?

Will the light switch work normally after this is installed? I'm trying to keep my house dumb while at the same time making it smart. I want everything to work normally and smart at the same time.

I was very excited to get this in the post yesterday. I wired it up to a light above my bed and can control it with a Lonsonho Zigbee wall switch and Sonoff Zigbee button all connected to the Sonoff Zigbee Bridge which all works perfectly. Only problem is when I turn off the light, I can hear a high pitched noise coming from the Sonoff Zigbee Mini. Any ideas?

Hello! I am new in Smart home. Just have Aqara hub and 1 switch. Need sonoff mini r2. Could you please tell me what I need: 1. Sonoff Mini r2 2. Sonoff Mini r2 Zigbee? Why? And and does it works with Homekit?

Hi Mat, thanks for your videos, they are great! I have a question: Do you think there is a way of adding an extra microcontroller to the zbmini to let the zbmini understand more mqtt instructions like dimming etc (with actually executing the extra functionality by the MC)? The MC can maybe use the 3.3V/5V pins of the zbmini for power supply and the rx/tx pins for communication. I really don't know if there are any diy community efforts in this direction, that's why i ask :). My current idea is to use the zbmini to switch a 12V power supply which runs the LED strip plus a esp8266 to control the strip via WiFi. This rises the question why using zigbee at all :D (and not using a tasmotized sonoff mini for example). But all my IOT stuff is based on zigbee and honestly i don't want to use WiFi for my IOT devices. The only benefit i see for "my" solutions is that the WiFi connection is only active when the device is active, but at the end it's somehow unsatisfactory to use zigbee for switching and WiFi for controlling then. Thanks, moik.

Doesn't seem to be much separation between the high voltage and low voltage on the pcb.

Hi what size back box would I need to fit this?

I haven’t being able to find the difference between mini, mini r2 and now this one?? Please

New to this type switch, does it hookup directly to SmartThings & can it switch 110 vac? Thx!

Excellent video, I'm new with these switches and I want to place some of them in my house and I'm deciding between Sonoff Min (WiFi) and Sonoff ZB Mini (ZigBee), which one is better and why ? if I choose the WiFi one does it take part of my WiFi bandwith slowing down my entire "internet speed" ? Why ZB version over last one (WiFi) ? Thanks in advance.

@NotEnoughTECH i have to get some new switches, i have to choose between the sonoff mini r2 and the shelly 1. which should i choose and why ? please respond asap, as i ineed to puchase in the next 24 hours.

Hey, Can I connect A/C or Refrigerator to this device?

Hello, is it able to change mode of ZB Mini to pulse mode? it is easy to do with WIFI Mini using Ewelink, but i can`t find how to to same with ZBMini. Maybe with Sonoff zigbee bridge?

The app you're using seems to be the ewelink one but you have a dark background, where did you activate that option?

Ignoring the two gangs of the zemismart, which is the better product? This or the zemismart?

ZBMini has finally been delivered to me. I must say I'm not satisfied with the quality of its power supply. It uses an capacitive dropper inside instead of transformer which means that the microcontroller, as well as its S1 and S2 outputs are not isolated from mains power supply. I prefer the design of Basic ZBR3 which has proper transformer. Also, I'm not satisfied with the switch delay of this mini. It's below 500ms, but still noticeable. I'll try to modify the RC circuit near the S1 and S2 inputs in order to reduce debounce time, hoping that debounce delay is not implemented in software.

Any hopes for 2-gang version of this?

can we connect this to tuya base gateway directly ?

Thanks Mat.

Reason for flashing its firmware could be to add a temperatur sensor or other sensors

Can we connect this device to the home assistant? Without flashing tasmota?

No inching function in zigbee version, sad.

It's zigbee 3.0 ~ so you can not use the CC2531 to conect it : p

My connections were labelled N In N In L In L Out Second should be N Out