Shameless steal

@@NexusGamingRadical steal what? that was first thing came in to my mind...believe it or not i dont care.

Insurance company....say what now?🤨

Nobody ever gives credit to the IT people that keep the Internet going. Nobody ever notices we engineers, until something goes wrong. 🙄

exactly

BWAAAHAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA!!!

🙄... you're killing me, Smalls...😅😂🤣

Thats enough outta you, Reynolds.

"... _have_ been foiled."

You didn’t 😂

😂😂😂

More like 10 seconds or even a bit more.

@@VanemParm I'm sure you are a really cool and fun person to be around

f

@@VanemParmi’m sure people love you at partys

went back for his phone though, risked his life for 1000 bucks.

@@GimmeSomeAdventure90% of gamblers quit right before they hit it big

Flour is worse.

@@GimmeSomeAdventure i mean, personally, i would also grab the only thing immediately capable of alerting emergency services instead of waiting and hoping someone else can do it for me

@@literalantifaterrorist4673 and photos of my children on the phone :P I can risk for it

It's all Putins fault

From Bad To Worse

man i had this problem too

The Kingdom of God is at Hand John 3:16 King James Version 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.

@@DHunter_47 Dude, fuck off, this is getting annoying.

hell yes - camera lasted a lot longer than i thought !

Camerman never dies

@@MultiArtStyleTWT he does though 😂😂

The cameraman never dies because tomorrow never dies...! 😁

I wonder if they piped the wires

was the ignition source (even if it was far away) the fire the man on the left lit up from that thing?

​@@polistirenn Good question! The way to evaluate a potential scenerio is to think about what it would look like if it happened and check how closely that matches observable evidence. The man is holding an oxy-acetaline cutting torch and lights the flame at the same time as the machine blows the hydraulic line. Its crazy how close the two events coincide, but lets consider each part individually before getting to possible interactions. The man is dressed in his regular work clothes but notably absent is the appropriate PPE (Personal Protective Equipment). He may be wearing a glove on his left hand but certainly not on his right (Probably so he can use a pocket lighter to light the torch. Thats much more conveniant than using the friction striker which is bulky/combersome but doesn't require dexterity. You know, so you can put on heavy gloves on both hands THEN light the torch) Also he's wearing a long sleeve shirt which is all kinds of yikes. Lastly, since you turn on the gas before lighting the torch there is some extra combustable gas in the air. Thats normally not a problem, the torch flares very slightly when struck then quickly settles down. Overall this is definitely a potential ignition sorce. The machine provides the fuel, hydraulic fluid, which is basically oil. Thats flamable, but its not very volatile, a.e. it doesn't vaporize well. The white cloud of spray we see is mostly technically liquid, just in droplets of various sizes. Some vapor is definitely present, and an expanding vapor cloud WILL ignite when it reaches an ignition source, producing a large flare thats roughly spherical. A rain of flamable liquid, however, has to actually fall on or very near an ignition source and fires start wherever the shower lands. If the man had been showered with oil to any substantial degree he would have lit up like a human torch, especially since he was holding an excellent ignition source. The inital fires are all on or around the machine, and only start when the shower of hydraulic fluid falls to the ground. Theres also plenty of possible ignition sources around there.

​@@StarlightSocialist Thank you for this information!! I know nothing about this workplace (or how combustion works), so to me it looked like a water hose suddenly started spitting fire. 😂

@@StarlightSocialist Thank you for this detailed explanation, I really appreciate you sharing your expertise! It’s cool to try and understand these crazy chemical reactions.

Thank you for informing people. It's just a shame that more people in this comments section won't see this. It's just a bunch of idiots asking what happened, or thi king aluminum can catch fire. Or that tbe plant is made of paper.

I got "fired"🤣

Uhhh… it was my coworker’s fault!!

@@CODING-FOR-YOU BOOOOOOOOOOOOOOOOOOOOOO!!!

contract ended

"I had a blast working there!"

😂😂😂😂 why is this so funny 😂😂

20 seconds later*

​@@mobarakjama5570Mordecai and Rigby that's why

@@RandyMarsh..best comment!

@@Sr89hot thx

Anything will be flammable if you hit it with a pressure washer jet of hot hydraulic fluid

I'd say it was hydraulic fluid on the cladding that was burning.

​@@LungsMcGeeI kind of wondered how flammable hydraulic fluid would be. There is always the potential for a large amount to leak from equipment.

Even low flammability oils will turn into a flamethrower when sprayed with enough pressure to become a cloud of fuel-air mix. Good thing there was a fire, not an accumulated cloud waiting to be ignited like a bomb.

@@GabrielMarques001 Atomized, like from a fuel injector.

"About that..."

About that ummmmmmmmmm..........

sooooo the.. thing blew up..

"Is the place on fire?" "No." "Then what's so important?" "The place is gone. Totally destroyed." "What? How?" "It had been on fire."

It might seem crazy what I'm bout to say..

😂

Mordicai and Rigby I need to put out the fire , then I need you to enter the gateways to hell and find the hazbin hotel , and last I need mordicai to hold a video camera and I need rigby to be recorded and chased by a demon girl named Charlie I will lend you 50k in case she refuses , other than that do this now and get this done before 8 pm OR YOUR FIRED 😡

​@@dinojoe6811Muscleman: Don't worry bro,I know a guy.

Lmfao 🤣

"Dude, how are we gonna do all this in 24 hours?"

@@pneumon6990 Muscleman walks in "Don't worry bro I know a guy."

well when they say fire is dangerous it can spread quickly this is what they are talking about in a nutshell🤣🤣🤣

Good to teach kids to respect fire, had part of a hedge burn, years ago as a kid, down which all ended up fine but it surprised me that the small fire was suddenly huge 10-15 seconds later, even towering above our house (which is like 7.5m I think? Not sure in inches sorry)

@@frits191 It's about half a basketball court

@Grivian ah yeah but then vertical, scary. The flickering on surfaces is also very typical, had a small oven fire once and noticed it due to the flashing (some baking paper touched the heating element)

Cleanup isle 3…..

Honey, please type me a new CV.

🤣🤣🤣

How could you even allow those things to be near the children.....?😮

as a scot i'd like to say you have a very interesting profile picture lol

@@lewissthompson2005 haha! It's not a political statement or anything. This channel was originally created by myself (Scottish) and my friend from Serbia. His lineage goes back to Soviet Russia, but his family 'escaped' to Serbia which wasn't the best move if you know a bit of the history. He wanted to move back, but repatriation wasn't really possible. And, in his eyes, there's not much difference between Russia 40-50 years ago and Russia today.

​@@tomsmith6513 ...it's a joke

And the guy was there 2 seconds before it wast on fire. Scary

The roof caught fire and it was flammable so it spreaded fast

Imagine being on your lunch in the break room and this happens

It wasnt safe at all in the first place xD when it first caught on fire it was already big enough it probably melted this poor guy’s eyebrows

@@Thebrownhammer23what’s the actual point of a re tarded ass comment like this

Thanks.

From this video, it looked to be a lot bigger. Glad to hear everyone got out okay.

Your small and my small is way different

@@tantoismailgoldstein6279 he meant small in the scale of the whole work place, as in 8 warehouses, and it was contained to only 1..but im with you, that is a big fire in my book lol

@@BlueOriginHR I worked in the chemical plants on the Houston ship channel for years...this is not a let me get back to you from the safety man.....this is a .....dammm event.....good thing in my polymer plant everything blows upwards

even made sure to check for any missed notification.

@@KP-by4eu Can't miss that text message!! 🤣

Phone or car keys...

Cleared browser history

Show your kids The Station Nightclub fire. Band called Great White was performing with indoor pyrotechnics. Seeing how exits were blocked and how fast that fire took off was absolutely terrifying. Condolences to those that perished horribly. All club goers should view.

@@NightWatch1337😳😄😆😂🤣😂

I didn't know there was an Emergency STOP button for a giant fire 🤦‍♂️

But Lunch

But his lunch

Fr this guy is crazy ifc grab ur belongings or it will get destroyed 😤 😒😒😒

Gonna need that sandwich

That was such an indiana Jones hat moment

Risk assessments are based on current observations and case studies. Neither were considered here. Everyone moans about snowflake generation and health and safety gone mad but there's a reason. This is that reason. Looked nice and safe 40 seconds ago didn't it?

@@nigelbenn4642 You speak only truths, my friend.

@@nigelbenn4642 "but..but.. we can regulate ourselves!, thrust us bro!" to then suddenly Boeing killing hundreds thanks to cost cuts, cheap corners, etc..

@@CesarinPillinGaming It is the ultimate cost of ignoring risks.

Can anyone explain to me what happened here? Why everything went up so quickly?

Aluminum is highly reactive to oxygen, I’m not surprised

What was it like? The fire I mean.

“Every time”?! How many times did it happen?!

@@Teslijah I only worked there for about 14 months and we had about 6 fires . And that was just on my shift. Other shifts had fires too. The aluminium was rolling through the mill at up to 800 feet per minute and there was liquid coolant being sprayed on it constantly because it got seriously hot. The coolant is flammable. Sometimes an edge crack in the aluminium would cause it to tear and the aluminium would then crumple up which caused a spark that ignited the coolant. Within a few seconds the flames were hitting the ceiling which was around 40 or 50 feet high. When a fire happened the fitters had to change the rollers in the mill. We’d be down the whole shift . It was probably one of the more dangerous jobs I’ve had. The pay was good though.

@@JonathanBrettMiller The fires happened very quickly. Within seconds. An edge crack in the aluminium would cause a tear. The aluminium would crumple up in the mill. The liquid coolant that was constantly sprayed on it was flammable. The crumpling aluminium would cause a spark and ignite the coolant. Within a few seconds flames were hitting the ceiling which was 40 to 50 feet high. All we could do is walk away and let the CO2 cylinders put the fire out. It would take around 8 hours to get the mill up and running again.

😂😂

Right!😅

I’m at step 4 from the jump!

Can't lose those critical DMs he keeps on the down low

Ong bro hes gonna have to hit me up

Personal data and info can be extracted from a phone even after a fire. If he left it there there's a good chance a fire investigator will go through all his personal shit or even sell his PII.

Probably panic reaction, also this could in some cases be smart, if they get trapped for example. That's why I always keep my phone in a pocket or nearby.

@@RT-qd8yl not really. it could technically be extracted if a tech who is very skilled in microsoldering can desolder and resolder it correctly without damaging the chip. that's assuming the silicon could withstand the heat of the fire without cracking, the plastic housing of the IC didn't get damaged by the heat, and the pads didn't delaminate from the board from the heat.

thx

We all know that the cameraman is always invincible.

Finally a camera you can see it all in HD and the whole thing lol

because its fake

@@KalebPrentice alueuropa aluminum extrusion factory in seville, spain. look it up little guy

The individual you refer to hasn't been seen or heard from since 2003. His last known location was Derry, a small town northwest of Bangor, Maine. A lot of people went missing there recently, before the destruction of the Pizzaplex. And there was the 2018 disappearance of the-

🤣🤣🤣🤣

So you mean a regular day at Work ?

All joking aside, this isn't funny. God save us all.

@@millitaryguy Oh crap. NOTHPA, get the guns!

Thank you for the info, I was wondering why the fire took over so quickly. Learn something new every day!

Thank you. I am very curious by nature

That makes complete sense. It would be the only way that insulation could catch fire so quick. Those flames must have been potentially incinerating.

Can anyone say....sprinkler system?

@@denniskane1870 Unless the sprinklers were connected to the bottom of a lake, they'd have done nothing. once that oil was atomized and lit, it became a literal jet. There's nothing that would have stopped it.

One went back to the table to get what looks like maybe a pair of shoes?

@@mattpetty1 No, he went back to get his phone. Not too bright.

how do you know it was a hydraulic cylinder? Or you just one of those guys that makes up shit?

@@trxtech3010 Huh? It's right there in the video. Or you just one of those guys that doesn't know what a hydraulic cylinder is?

No, he's just someone who actually does useful stuff in life and recognizes things, unlike dumbass trolls who have nothing to do but advertise their ignorance@@trxtech3010

Is it possible the hot aluminum and the metal in the ceiling created a thermite reaction? The flame looks too hot just for hydraulic fluid burning.

@ynvch I'm unsure about that. I thought that that could just be the quality of the camera. This looks like a way cleaner shop than I worked in. But working in those conditions with that material (oil, heat, aluminum, you probably have propylene and acetylene torches that create smolder, etc.) those ceilings and walls collect all that in the air. It's literally big blackish gray chunks of dust. You may clean that once a year. But that shit is so flammable. Even in the floors. I've seen sides of furnaces get cracked or punctured and drain molten metal out on a floor in minutes. No human can do anything about that until the molten metal is finished draining, and the damage done is amazing. I've seen 3 or 4 inch hydraulic hoses break from wear and spring a leak next to an uncovered furnaces. That furnace will have flames so hight off the surface of the metal so fast it's scary. These guys probably didn't get a chance to hit the E-stop in time.

aluminium*

@@anderstermansen130 thank you

@@joesphschramm3754 thanks, really scary stuff.

haha why it describes my life so well ;__;

​@@ZarinuLoren😐😐😐

That's deep. And terrifying.

Same happened in my marriage of 20 years

we had oil based hydraulic fluid in our cranes and moved to resistance hydraulic fluid, not sure if it was HFA, HFB, HFC or HFD, but seen both type burn and this to me looks like oil based, how fast it moved and how things stayed lit away from the main fire

The ceiling tiles themselves aren't burning, they're coated in aerosolized hydraulic oils which are burning.

And flammable dust from the machine work.

@@Icouldnotthinkofanything I worked at a machine shop as part of a college program in the early 2000s. One of the things we did was machine magnesium castings to their final dimensions. Someone started a lathing process without turning on the coolant flow, and the whole chip bin went up in seconds. Between Iron dust, aluminum turnings, and little chips of magnesium it was essentially a thermite fire. Fortunately this was an older machine and not on the tightly packed main floor where the fire could spread.

“Did I do that?”

Yeah he looks up like, "how the fuck did I do that!?"

Hmm, I do like those ideas of safety measures, but the question of means and effectiveness remain. I personally have never seen a safety system like that, though I'm sure something with the same goals do exist. Your first obstacle is stopping hydraulic fluid flow. Critical faults, E-Stops, enable-run, etc will (should) stop the pump. If you consider that hydraulic systems operate in the thousands of PSI, you can stop the pump and still have residual pressure blow out. This is exacerbated by any hydraulic accumulators or pistons that get compressed by gravity from lack of pressure. Fire sensors are tricky. Most work by either particle detection from ash and smoke, or by heat. Place a heat sensor too close above a machine and you may get frequent false alarms, and I've yet to see an industrial facility install particle detectors due to how common it is for them to have a lot of junk in the air that will also set false alarms. Pressure activated safety valves though, that's trickier. You can use something akin to a standard blowoff valve, but again it would have to contend with residual pressure and i can't see it being reliable for stopping flow immediately (those designs are reliable for overpressure scenarios, though). Your other option is an electronically controlled normally closed valve with hydraulic pressure sensors, which many hydraulic powered machines already have for run-enable and e-stop purposes. You still have the same issue of residual blowout. I am curious about the design of this machine as I question why that tubing on top of that piston is in such an awful spot to work on, inspect, and is moving so much. That is what hoses are for. Hydraulic lines don't just blow out of nowhere. You (should) have blowoff valves for overpressure scenarios, and lines should be getting inspected for wear and tear on a regular basis. I see poor design and lack of or inability to perform inspections on that fitting as contributing. Thankfully it seems no injuries or loss of life was involved in this accident.

You can not plan for ever eventuality. You can only make things but so safe sometimes and that is the reality of the situation. If you made everything totally safe nothing would ever get done.

Are you an Engineer?

@@artnovak3259 A proper engineer designs and spends their lives in AutoCAD. I build and maintain what they design. Skilled-multitrade.

@@rocketman0420what line of work are you in that was an incredible comment of ideas and possible problems with those ideas

Hell yes. This could be used as an excellent example to companies, or even schools, who’d rather save money and avoid the repairs that are needed…leading to an absolute catastrophe caused by years of neglect!

That cylinder could’ve been brand new…tf are you talking about? Unless you have their maintenance records, stfu 😂

and yet we are running the whole planet like that

​@@manfredconnor3194 im gonna need you to get off the internet for a while since you think this has anything to do with that. Youre too obsessed with taking sides. Get a grip and act like a critically thinking human being.

@@RavioliOutTheCan Hahaha go pound sand.

I agree, that was no ordinary GoPro!

Somebody asking the important questions!

If it could survive that, same one used for colonoscopies, probably...🤣

I bet it was Sony

The cameraman always survives 🤣🤣. They reckon 🤷‍♂️

To be fair, he probably needed to call emergency services.

@@NottJoeyOfficial yeah oooook 😂 every other person there has a phone too that can be used for that. He was saving his phone. It's ok. He's just an average human.

cell phones are that important...

100%, in a million different timelines, the ceiling fell down on these guys. holy hell, they are beyond lucky to be alive. unreal.

​@@PeaceWatcher-ek7zlcutting edge physics disagrees with you . Have a look into it .

@@stephenjones6500 The same cutting edge physics that slurped up string theory?

I counted 5

"but it's scary that something so small could cause so much damage" thats what she said

Cocoanut Grove might have been caused by ONE match. Also, much illegal wiring, so it's undetermined.

@@windsofmarchjourneyperrytr2823 There's also the theory that since WWII was ongoing, Freon gas that would be normally used for the air conditioner system was unavailable. So the restaurant used another refrigerant called Methyl Chloride. Problem was, that if that stuff had leaked out of the A/C system, and the "illegal wiring" you mentioned shorted out behind a wall, starting the fire, as methyl chloride is extremely flammable. Think of methyl chloride (CH3Cl) as being pretty much as flammable as Natural Gas (CH4 - Methane), and you see the problem....

Holy crap

thats when you call it a day and have a free for all wrestling match

​@@HR-rt9nhJust went "Zeke" on all of em'😂😂😂😂(My daughter watches Bob's Burgers and there's a little country ass kid named Zeke that's always grabbing another kid, amd only one other kid out, out of the blue, and hollerin "Come on Jimmy Jr, let's WRASTLE!!").

LOL now your just trolling... enjoy your cave! @@robertlee4809

My boy's a box! Damn you, a box!

Tesla cars are made using large hydraulic presses. I wonder if they've had any such accidents.

​@@adrianthoroughgood1191Tesla makes people handicapped every day.

​@@adrianthoroughgood1191nah they put all the explody parts into the cars lmao

@@adrianthoroughgood1191Hydraulics are pretty common in a lot of industries and most do alright. I don't think they're exactly unique to Tesla.

@@adrianthoroughgood1191 Many things are made with large hydraulic presses.

kzfaq.info/get/bejne/ibNdrNSluLuWqps.htmlsi=vVfiF0GF3YZUi3q- Has entered the chat...

well aluminum is flammable must have been a lot of aluminum dust for it to go crazy like that so quickly🤣🤣🤣🤣🤣

Wise move. Way too many companies see their employees as expendable. People bag on unions all the time, but they're there for a reason. Good companies don't require unions, bad companies do. I have a long scar on my left forearm that shows the difference between the two...

@@TehButterflyEffect - What's that got to do with unions? Sounds more like an issue with the business owner ignoring safety regs and/or not giving two sh*ts about the union contract.

@@Snarkapotamus Fundamentally unions are great in theory but when it becomes political with payoffs behind doors and bureaucrats running things the working man suffers while still paying his dues. One injury claim isn't going to prove that all unions are more ethical.

had a similar problem in a place i worked at i left and then most of the other staff did over a year they now cant get qualified people to work for them

@@rustyboltz2820 - They're about the only thing standing between unethical, immoral, greedy and downright dangerous employers and the working man. My experience is obviously different than yours. If you even have any in this arena...

​@@MrFaaaaaaaaaaaaaaaaa ok

0:10 MF still went back for his Phone...

22 seconds from the burstting cylinder to the first falling ceiling tiles. This is a clear message: When the $hit hits the fan GTFO! Run and don't look back. Or to quote the Mythbusters: _"de-ass the area with a quickness"_

And then started texting! Lol

@@Ash-zh5yg”Honey, put some beer in the fridge. I’m coming home early.”

That’s ridiculous. Paper maché? Everyone knows such industrial buildings are typically constructed with the best toilet paper and toothpicks available

was it worth it ?

There's not a lot of ceiling on most industrial buildings. Just corrugated sheetmetal with a rubber roof.

That's what happens when you build as cheap as possible.

​@@johan.ohgrenThat's what happens when you have 10,000 PSI of hellfire blasting the ceiling

stay safe out there!

I'd be finding another job ASAP.

@@SB-dg8hq every job sucks

it would be pretty difficult for something this crazy to happen at my job.@@robbirobson7330

​@@SB-dg8hqEvery job is a mix of safety, pay and fun, you choose 2

that's half way to thermite

yeah, tannerite uses aluminum powder as an oxidizer and it makes VERY big boom.

nice masonic basebaal ritual picture. same as ur job for ur destruction.

​@@Ey_SmoKrac*fuel. The oxidizer is ammonium nitrate. Al is also used in flash powder (firecracker powder) as the fuel.

@@Ey_SmoKrac bro u a scientist? No so stfu

Dust burns. Mills, flour mills, could explode.

Ever heard of thermite? If metal once starts "burning" it's already to hot to simply extinguish it. it keeps getting hotter the more material is burning. it'll reach temperatures comparable with the surface of the sun. and it'll burn through steel...

Higher the surface area higher the rate burn. It’s almost physically impossible to get a higher mass to surface area ratio than fine particulate like dust or flour. Mix that with open air and you’ve technically just created military grade explosives.

hilariously(depressingly) one of the things that truly destroyed the hindenburg was they painted/coated the entire airship with POWDERED aluminum, which is now used as to force rocket fuel to burn at higher temps. apparently best homemade substitute is rust powder and sugar. tl;dr dont paint your giant hydrogen blimp with rocketfuel

Different materials still need to reach a certain temperature for ignition. Aluminium, for example is quite high. Once it is ignited though and in a shaved form, you aren't putting that out.

Yeah the guy who ran back risked his life for whatever he grabbed.

​@@IanDoesMagic he also endangered his coworker who appeared to wait for him

@@totallycarbon2106 so his coworker endangered himself

Not with my browser history uncleared.

@@travisvanalst4698 😂

Send in Kowalsky! He was the go-to guy on "Voyage to the Bottom of the Sea" who valiantly did the worst jobs on the submarine.

Ok

I'm sure it isn't running out of ice cream

That and the Kraken

And taco night.

it was just too bright for the camera to handle, not actually white

@@citymorgue629 Usually, that results in black in the camera's 'eye'.

Aluminium has one of the strongest exotermic (releasing heat) reactions with oxygen out of all elements. It's not used as fuel bcs its solid both as metal and as exhaustion oxide product. So it's hard to use it as fuel due to caking in incinerator. Also reaction with oxygen is hard to start due to some properties of alu. But aluminium is a component of the most potent explosives.

@@citymorgue629 that’s WAY MORE terrifying!

@@antonzhdanov9653 I'm guessing this also explains its use for making thermite.

That's what happens when you mist a fire with hot hydraulic oil at JesusFuck psi.

⁠​⁠@@teebob21i now need to have a JesusFuck™ in my pressure gauge 😂

You're welcome! That'll be 20 bucks.

Better swipe right!

You mean cinder right?

Yep, literally 6 seconds for the desk to be engulfed and then another 15 for the burning ceiling to come down on it. Imagine nearly dying over a cell phone

@@samnemo5928 maybe his cell phone plan didn't cover damage caused by a factory melting down in a fiery aluminum filled explosion? Don't be a hater

@@samnemo5928Well maybe he has some valuable porn collection in it

​@@samnemo5928Yeah, a woman called Felon did this on the CTA tracks.

Nitrogen has many uses in welding as a shielding gas, also.

Displaces oxygen. I’m not being a jerk but nitrogen doesn’t “take away” oxygen, it just dilutes it. As a fire service professional, I appreciate your post but offer this clarification for anyone going into a technical field who might be reading this post . I’d like to thank you for what you do to keep the economy intact and to wish you safe travels. (From one cdl driver to another - TY for what you do! Haven’t been on the road much lately, but maybe I’ll see you out there!)

Cargo planes tend not to have humans in the cargo hold. Humans need oxygen as much as a fire does. The last thing you want in an active fire situation is your supression system causing mass unconsiousness when they would have made it out otherwise. Unless oxygen starvation supression systems are safe to use around people? I'm not knowledgeable on the subject. Just a thought.

except molten metal doesn’t really need oxygen to keep going hot.. just pressure hehe.

​@@nickkozak4763actually Nitrogen has expansion rate very low, so it is used in airplanes tires.

Some of us know that's when the camera's sensor becomes saturated.

I have a feeling the rafters of the building were loaded with aluminum dust. That is what went up so quickly.

Aluminum dust is highly flammable and it burns very, very hot. When we were kids we were making flammable liquid from number of substances (that I would not mention to not give idiots like little me an idea) and the aluminum powder was absolutely essential component to raise the combustion temperature to the point that fire would melt through metal plate. I used to work as a design engineer with flammable and explosive fluids. The safety rules are very, very strict. Even paranoid I would say. Unfortunately they are often broken. Thus we got things like this. Or worse, when hydrogen or oxygen are involved. With hydrogen in particular it is a very energetic explosion with no warning or anything.

That went up way faster than arson.

Atomized petroleum-based hydraulic oil will do that

​@@aluisiousarson wouldn't do such a thing. He's a good boy

Compared with the thermal energy stored in tons of molten metal, that tank of acetylene is ignorable. At that scale, it would be no more than a wimpy puff compared with that the molten aluminum can do. If you drop a ladle of iron slags into a pit of water, you get steam cooked in an instant, that's assuming no chemical reactions occur. Aluminum can explode when contacting with water at sufficient scale, just like sodium. A few days ago a water-aluminum explosion happened somewhere in China. Let's just say, a few tons of molten aluminum having a coulomb explosion is no joke. Even just a tiny fraction, maybe just a few kilos reacted, the explosion reduced the 1000+ sqm warehouse into mangled metal, and everything at the epicenter into pieces. Gram for gram, coulomb explosion is comparable to that of a high explosive.

Fair enough, the tanks are also fitted with shatter discs, and blow off plugs. So the gas will be let out before the tank would explode. Added a lot of fuel to the fire no doubt.

I doubt those things would help given the amount and weight of flaming debris falling on 200 pounds of acetone and however much acetylene was left given how unstable it is to heat and pressure. A fully pressurized oxygen tank would have turned that cart into a rocket sled too if you've seen videos of high pressure cylinders failing.

all of that started it but the water based sprinkler was dumb for aluminum.. it just created hydrogen which made it go from flammable to explosive

Yeah I’m not sure what those geniuses waited so long to exit for. I would’ve sprinted out of there so fast

prob hangs out on r/WallStreetBets

Apple and Samsung charge $2000 + for the latest device,... I wouldn't be letting that shit burn up either... warranty aint covering inferno and crushing damage

its crazy how if he had spent even a second or two more on grabbing his phone he would have died

@@PeterTroutmanomfg

Literally did something you are told not to do in every fire drill, and his buddy hanging around with him waiting for him to move before he heads to safety is even more stupid.

And the hydraulic fluid was likely just the ignition source for all of the aluminum dust up in the rafters.

Plus, it is often heated from the pressure. We had one of our sanitation trucks blow a main hydraulic line next to the exhaust manifold and the fluid went almost straight up (just like in this reel) like a flamethrower. The fire engulfed the cab and the body in just a few seconds. Fortunately, it was idling in the lot and there was no one in it. If there was, no doubt they would have been burned.

@@rockets4kids If all they do is extrusions there, Very little aluminum dust will be present. Particles coming off the dies are oilsoaked, they build up as a paste.

Same is true of sugar/flour

@@pierrecurie I'd say sugar/flour is way worse.

Honestly, it really is.

You see, ma, what had happened wuz....it's like this.....I got nothin'

Hey, that was ONE TIME.

Thermite

i know a kid who burned the left side of his face with drain cleaner and aluminum. we were in the 4th grade at the time. kids dont have a sense of potential dangers.

​​@@kwinterburn, as an undergrad chemist in the 1970s, doing stupidly dangerous things with chemicals was standard weekend entertainment in the dorms. Thermite was popular; we'd ignite a ring of it on concrete and watch the shock fronts ripple around it. It's a wonder none of us got seriously burned or went blind. Setting off acetylene bombs (which can be made with a rubber balloon, a masking tape fuse, and two common household products!) was another fun way to risk life and limb. Sometimes I wonder how any human survives past age 22. 🙃

​@darkshadowsx5949 I nearly covered myself in drain cleaner when I was 25. Poured some in the U bend and no sooner had I turned around to leave, it exploded out of the plug hole. It had reacted instantly with whatever was in the bend. The place was a new build so the builders must have been pouring alsorts in there. Needless to say, it cleared it and I didn't get any on me. I've only ever used salt and boiling water to clean a drain since that incident.

@@mikeh2006 Someone told me that if you mix brake fluid and powdered chlorine it would catch fire. We did it mixed up in a coffee can nothing happened so we dumped it the trash can went inside to play video games Intellivision yes this was the 1980's. My mother yelled the trashcan is on fire!!!! We went running out I pulled the can away from the house put it out with the hose. Later in school chemistry teacher told us the fumes was same as mustard gas if we had breathed it probably scarred our lungs.

Yup, I remember that.

Yeah, I remember that video. If you weren’t out of the building in 40 seconds then your chances of surviving that fire was close to zero.

Station nightclub fire

Wasn't the door locked too or something

Or the club was filled overcapacity