A pro guide on how to apply Osmo Oil to interior oak doors

A pro guide on how to apply Osmo Oil to interior oak doors - Painting tutorial / demonstration

Рет қаралды 220,692

11 жыл бұрын

Visit my new website
www.brushupwithbarry.com
Please check out my new painting and decorating channel
• How to Paint and Decor...
Click on brushupwithbarry.com/ for my new website including painting tutorials 2017
A full demonstration/ instruction for interior and exterior preparation, painting and decorating techniques which in turn will improve your home decor - low maintenance
Osmo Door-Oil is a unique oil and wax combination designed to protect interior veneered wooden doors. The unique formulation penetrates the wood surface which remains microporous and whilst the finish will not crack, peel, flake or blister. The surface also becomes healthy and elastic, and the wood's fibres are prevented from becoming dry and brittle over time as well as shrinking and swelling.
The wood's true beauty is accomplished by using Osmo Door-Oil. The emphasis on the wood's grain and natural characteristics provides a warm and rich effect to ensure that any interior room looks luxurious and elegant. Each wood has its own style and unique charm, and is seductive from the first sight.

Пікірлер: 105

@danielpidgeon9322 9 жыл бұрын

Barry this is just fantastic work

@brrymcgolly Жыл бұрын

I've actually use this stuff today and it's fantastic. It certainly brings the grain out the timber it's a little bit expensive but it's worth it. Spend once save later ..

@thebreakingdad Жыл бұрын

Great video, super helpful! Thank you!

@katydee69 9 жыл бұрын

Great video. Really helpful

@habibarajah814 7 жыл бұрын

Stunning 😍

@24Wayney 5 жыл бұрын

Great video Barry, I'm looking at this product for my doors and wondered what it will be like on an old pine table? It hasn't any waxes on as I sanded them off years ago. Thanks

@graemepae100 4 жыл бұрын

Saw your vid last night and put it to good use today, my question is....on starting, is tap tap, side to side in metric or imperial ;) .. have to say ive not oiled doors before and they look great using your technique. Thank you for posting

@pjroberts2010 4 жыл бұрын

Would be nice to see how it looks when dry.

@jeanpierrecelery7195 3 жыл бұрын

great!!

@karencoomber2029 2 жыл бұрын

Hi, What finish have you used on the doors clear matt, clear satin? they look lovely. Thanks for posting

@emibias3960 7 жыл бұрын

Hi, would you use the same process when applying Danish oil to a door? In my case it's Douglas Fir, or would you stick to applying the oil with a cloth?? Cheers

@Ardulie 8 жыл бұрын

Lovely finish. Would you oil the edges after you've done the door faces or is it best the other way around? Thanks.

@barryma10 8 жыл бұрын

+Julie Chandler Hi Julie, thank you for the compliment. Always do the edges first, this will stop any build up on the finished faces. :-)

@2manycatsforadime 4 жыл бұрын

works over oil stain?

@offroad3607 5 жыл бұрын

What's the odour like, is it strong?

@steveonimac 6 жыл бұрын

So u don’t do any edges ?

@lesleyjones5455 6 жыл бұрын

What oil are you using again I missed the full name Osmo..........

@TheDobberj3 5 жыл бұрын

Great video. How many coats do you need to apply?

@barryma10 5 жыл бұрын

Jeremy Dobson many thanks 😊😊 just 2 thin ones will do it, then in a few years just 1 coat to give them a freshen up .. hope that helps

@hassanimran3997 3 жыл бұрын

Hi Barry, what do you recommend to finish pine doors and skirting. I've bought a few varnish colours and don't like them. I want more of a natural finish with a little shine to it. Thanks

@barryma10 3 жыл бұрын

Hi Hassan, have you tried the osmo oil in the video, it’s better than varnish as it won’t peel... and it drys to a semi sheen

@tigerboy4516 11 күн бұрын

how do you remove

@carlbagui101 10 жыл бұрын

could you please tell me exactly what varnish were you using in this video

@barryma10 10 жыл бұрын

Here you go... I used the satin finish www.google.co.uk/shopping/product/5336013603804044720?q=osmo+original+hardwax+oil&psj=1&bav=on.2,or.r_cp.r_qf.&biw=1249&bih=592&bvm=pv.xjs.s.en.jmw5uQvp5VE.O&tch=4&ech=1&psi=F57_U9uODKSP7Abt-YHIAQ.1409261190401.3&wrapid=tljp140926119787710&ei=eZ7_U7zDCMaf7Aafq4G4AQ&ved=0CIcBEKYrMAM

@scottmclean6301 5 жыл бұрын

Hy Barry jus found your vids. Nice work. Iv got what I'm pretty certain is a sapele hardwood shelf I'm going to do tomo. What brush would you suggest, natural, synthetic or them foam brushes? Thank you

@barryma10 5 жыл бұрын

Scott Mclean what material are you using to do your shelf? Thank you for the compliment 😊👍

@scottmclean6301 5 жыл бұрын

@@barryma10 the same osmo polyx solid state you have

@barryma10 5 жыл бұрын

Scott Mclean is great finish can be achieved just by wiping it on thinly with a lint free cloth... no need for a brush 😊

@kissozen1 5 жыл бұрын

@@barryma10 mate help me out with the material you used. Which osmo oil as I like the color

@barryma10 5 жыл бұрын

ghaith zen here you go 😊 www.google.co.uk/search?q=osmo+original+hardwax+oil&psj=1&bav=on.2,or.r_cp.r_qf.&biw=1249&bih=592&bvm=pv.xjs.s.en.jmw5uQvp5VE.O&ech=1&psi=F57_U9uODKSP7Abt-YHIAQ.1409261190401.3&wrapid=tljp140926119787710&tbm=shop

@leonhaslam4815 8 жыл бұрын

Hi Barry. How many tubs would you say I would need for 9 oak doors? Thanks

@hammadshabbir6505 Жыл бұрын

check this video to get more information about How To Wax Wooden Doors? kzfaq.info/get/bejne/aceCmppe0divhHk.html

@bartoni79 Жыл бұрын

3 mins to paint one side of a door. Impressive

@barryma10 Жыл бұрын

Thank you Bartoni 🙏 😊

@AKosta-zf3vn 4 жыл бұрын

That's what you would call Poper Professional Painter.

@paulyoull5472 3 жыл бұрын

Hi Barry, ho w many coats would you give an oak veneer door? Do you sand in between coats?

@barryma10 3 жыл бұрын

Hi Paul.... 2 coats applied thinly would be fine... and a gentle sand between coats... see if you can one of those sanding pads or some fine grade sandpaper etc

@paulyoull5472 3 жыл бұрын

@@barryma10 thanks for that Barry.

@tommym936 9 жыл бұрын

Hey Barry, What type of sanding pad have you used to prep the door. Thanks.

@barryma10 9 жыл бұрын

Hi Tommy, I used a foam sanding block, www.ebay.co.uk/itm/40-x-WET-AND-DRY-FOAM-SANDING-BLOCKS-PADS-SANDPAPER-120-grit-/291281995382 like those in the link. You can buy them from markets for 50p each. I find them excellent for getting into tongue and grove. Hope this helps :)

@tommym936 9 жыл бұрын

Barry Mason Thanks.

@WestysGate 7 жыл бұрын

Barry Mason would you pre sand a unfinished oak veneer door as well Barry. I have six oak veneer shaker doors to paint have you got any tips on how to approach painting them.

@barryma10 7 жыл бұрын

If it's not been coated before you could very lightly rub down with a sanding pad first...then apply a coat of osmo oil... after the first coat is dry the grain will raise... in other words it will feel rough.. then lightly rub down again until nice and smooth and apply a 2nd finishing coat... I will find a link for a sanding pad

@barryma10 7 жыл бұрын

Stuart Westgate www.decoratingdirect.co.uk/viewprod/r/RODASP/?gclid=CKPFvpj139ICFQE4GwodhH4F_A

@steviemac5023 6 жыл бұрын

Hi, is it important to sand the doors down first, I’ve just had 4 internal doors fitted but there untreated, I’ve bought the osmo oil and a cloth to apply it, but should I use a brush?

@1970alexays 6 жыл бұрын

A brush is much quicker - the oil will otherwise soak into the cloth.

@steviemac5023 6 жыл бұрын

1970alexays thank you my friend

@barryma10 6 жыл бұрын

Both are fine... you could sand very lightly at first but you will definitely need to sand after the first coat has dried as it will lift the grain

@steviemac5023 6 жыл бұрын

Barry Mason thanks Barry 👍

@davidfalat4377 4 жыл бұрын

Looks like a top lad

@barryma10 4 жыл бұрын

Cheers David 😊

@davidfalat4377 4 жыл бұрын

@@barryma10keep it up bro👍🏼

@MasaMuneDenadoro Жыл бұрын

Where u get that door? It's awesome.

@barryma10 Жыл бұрын

It was in the property Johnny 😊

@andreacook1738 Жыл бұрын

we just bought our doors similar to this from UK Oak doors

@parmnandra4413 7 жыл бұрын

hi what finish are you using please

@barryma10 7 жыл бұрын

Parmjit Singh satin finish on this door... subscribe to my new channel for loads more decorating tips and advice... click on the videos section on my new website 😊 brushupwithbarry.com/

@deanwarner2006 2 жыл бұрын

What would you recommend for oak veneer doors?

@barryma10 2 жыл бұрын

The same stuff Dean… it will make them look amazing.. just don’t apply it too thick 😊

@Poopsy1970 3 жыл бұрын

What oil do you recommend for oak vaneer

@barryma10 3 жыл бұрын

I would use the same material in the video... just apply it very thinly 😊

@christopheraustin1118 2 жыл бұрын

How to remove plaster stain from untreated oak doors

@thewhippetsmum 5 жыл бұрын

Hi Barry. I've got the Osmo Door Oil for my oak veneer doors. Is the application method the same?

@barryma10 5 жыл бұрын

Ka B yeah... just a very thin coat.. let it dry, slight rub down then apply another thin coat 😊

@thewhippetsmum 5 жыл бұрын

Thanks very much for your prompt reply Barry...was expecting to wait weeks! When you say 'rub down lightly', do you mean with one of those non abrasive things? Would a non stick scourer do the same thing? Fine wire wool? Sorry to ask so many questions, but I need to do this properly and only once!

@barryma10 5 жыл бұрын

Ka B No problem, yeah fine wire wool will do it. When the first coat is dry it will feel rough.. lightly rub over until it’s smooth.. remove the dust and and loose bits of wire wool .. ie by a Hoover and you are ready to go 😊

@thewhippetsmum 5 жыл бұрын

Cheers Barry, you're a star!

@barryma10 5 жыл бұрын

Ka B let me know how you get on 😊

@deasonuk 8 жыл бұрын

Do i need to cover up glass in a shaker door for treatment? Got laminate on still from the factory but one or two were peeling so took them off.

@barryma10 8 жыл бұрын

+Daniel Eason Hi Daniel, sorry for my late reply. I would remove the laminate and apply this masking tape. I have used it on many occasions and it has never let me down www.tesa.co.uk/craftsmen/precision_mask/indoor. Good luck :)

@deasonuk 8 жыл бұрын

+Barry Mason cheers mate. poly is great stuff, one coat seems to be fine. covered 6 doors

@WestysGate 7 жыл бұрын

Daniel Eason Hey Daniel, i have six doors to do also mate. I'm guessing a 2 5 litre tin will do. i was going to use the poly type as well. have you got any pics?

@deasonuk 7 жыл бұрын

Stuart i did two coats with a litre. probably should had done three. You will get a good finish with this stuff once it dries.

@WestysGate 7 жыл бұрын

Daniel Eason Thank for replying Dan. A litre tin goes a long way then :-)

@woodman417 3 жыл бұрын

Try Woodoc mate, I have moved away from hardwax oils and never looked back, for doors the W10 (satin/silky finish) www.woodoc.biz/collections/indoor/products/woodoc-10 is great or Woodoc 5 (the Matt) (www.woodoc.biz/collections/indoor/products/woodoc-5) is absolute stunning. AND if you put it on tables cope with temperatures up to 180 deg C. No more worries for cup of teas etc!

@just2goodpeace22 6 жыл бұрын

Hi what grain sanding paper ? We have new hard wood oak Doors

@barryma10 6 жыл бұрын

Hi, I used one of those medium grade sponge sanding blocks, they are great for this kind of work and to de-nib between coats www.screwfix.com/p/flexovit-sanding-sponges-medium-coarse-pack-of-6/70902?tc=CA6&ds_kid=92700022649300944&ds_rl=1249481&ds_rl=1245250&gclid=EAIaIQobChMIqZP8nYqb2wIVC5ztCh0OPgjgEAQYAiABEgIUdfD_BwE&gclsrc=aw.ds&dclid=CNajoaOKm9sCFaqiUQodN08OAw

@DmitryMyadzelets 3 жыл бұрын

@@barryma10 Could you just answer the question? Your links are not valid anymore.

@christopherhutton9653 5 жыл бұрын

Hello would this work on Howdens Oak Veneer doors?

@barryma10 5 жыл бұрын

christopher hutton I would of thought so... just try a little bit ion the rear of the door and see what happens 😊

@wbev_thai1666 5 жыл бұрын

No , oak veneer doors are not recommended with this osmo , as the veneer could lift in time , but I haven't had problems with it before i knew this , they have a osmo door oil

@keketforest 5 жыл бұрын

Yes been applying it for years with perfect results. Quick sand with very fine sandpaper between coats

@CARLIN4737 4 жыл бұрын

We are using this product on all the doors. New build housing. Swindon. Stunning 😉 classic. PROPAINTER

@pjroberts2010 4 жыл бұрын

Do you have a link? thanks

@wallacegrommet9343 7 жыл бұрын

Leaves the wood looking natural, not plastic coated, and it resists yellowing better while protecting the wood from water, dirt, and staining. Superior product.