The best car stereo installers on KZfaq!

For what it’s worth…. I love F150 vids

You have just the right amount of OCD and perfectionism. If I ever win the lottery - I'm coming to Florida to get you to fix/upgrade the tunes in my 2019 F150 XLT.

I love watching you guys do installs it's like a new TV show every time keep them coming please

Always fun to watch you guys put all that stuff together. thanks

Seriously have never learned as much about how to do a car audio upgrade as I learned from this vid. Super well done.

You guys are true professionals. Great job on the video.

I really appreciate the way you show us all the ways you've thought it out and what you've done to make it easier and the process nice and well built It must take a lot to do all that and show people again thank you.

Great great video with alot of no sweat details just like when we were at the expo, I know the manufacturers and also customers appreciate that you have a vast knowledge of the equipment, design and lil details for everyone that they getting a proper representation of industry equipment and customer service

Always super clean builds!! I Love It.

👍🏾Great video! Like the old saying goes, "When you're having fun or enjoying something, time flies!" Those 47 minutes of video passed by quickly.

Sure wish I had more experience and knowledge you guys make it easy to install.

Such a clean install!

Wow definitely one of the best car audio channels on KZfaq hands down!!! I wish you were in Dallas I would spend my money with you! Keep it up 👍

I love the detail you guys put in your installs. Like amp installs and wiring and the attention to detail is superb.

Man I love the content! So awesome and informative 👌

Great video! Would really like to see an install on a 21 Silverado 1500 w/o Bose. Looking to upgrade mine and still trying to figure it all out.

I wish I had the money to do all this stuff love the videos

Define quick..... haha Lots of good info.

Does this install work for a 2022 F-150 with Sync 4 radio (no B&O, just the basic)?

Is there a way to keep the fake engine growl on the f150? I have a 2018 F150 with 501a package. That’s the B&O factory stereo with sub behind seat. I have an aftermarket amp powering my aftermarket sub added on and still have the factory sub behind driver side seat. I want to take factory sub out to make room for an amp rack to drive new door speakers. I actually want to keep the engine growl. I’m curious if the aftermarket sub amp could pick up that signal? I plan on adding an LC7i when I get the door speakers and amp.

Hi can i use a 5 channel amp in my 2017 f150 using a dsr1 and Fo2 to power my front components and rear coaxial and sub?

Clean as always. But I don’t know why I hate that yellow ground cable. It bugs me so much 😂😂

Dean, Does the Q Series amps not have the built in load for high level? I know that they added that feature to the KX series amps once they turned black, seems weird their premium option would have that removed.

I thought for the ford 150 we need the LGD green? How would I know if I would need the LGD blue?

I have a 2018 lariat f150 with the b&o audio. Do I need the same LGDs and T harness? I want to upgrade the speakers and put subs in.

I recently did a loc and amp install in my 2015 f150. You hit on an important aspect if the install in this video but I was hoping you could go a little deeper into the subject. The subject is how the power turns on as soon as the doors are opened. This signal is amplified as well and I'd like to be able to turn it down. It creates a stable white noise that isn't changed with volume adjustments. I have Forscan if that helps, but I'm hoping you could shed some light on the matter. I did have to disable the fake engine noise with Forscan and am hoping there is a setting to change. Thanks.

Hey guys not sure if a response will come but I will try anyways.... 2021 Telluride looking to add 8inch sub & amp to premium sx Hrmn&Kardn which has a sub already installed... can you tell me what I need for this process ... want stock mids/louder is this possible without upgrading door components ?

how much power can i run with the stock eletrical and a good agm upfront i have the same truck

For the tweeter being wrong, check the wire color not the heat shrink. Thats y it was backwards

Is that the aftermarket harness your pulling apart or it came out of the factoy setup?

The blue ac-lgd does not works on 2021 f150, power cuts at around 20 and smd dd1 always flash on distortion light.

Any chance you still have that APIM harness?

Did you use a line output converter

Do you have video on 2019 explorer xlt?

did you remove the factory amp entirely ?

Hoping you reply or someone will....But where did you get the T harness?

Would this harness work with the 21? F350

Yo, maybe im just smooth brained, but Would you mind clarifying where the 2 sets of speed wire plug into?

Where are you located at and what do you charge for install ?

Okay so where do I get this Axxess T harness?

The wire colors are backwards. U put black heatshrink on the grey wire and red heatshrink on the purple wire, DEAN. watch the video again and look

High level to LC6i to amp for me

So would I need the LGD for a 2016 lincoln mkz? It has the 8” screen non branded. I have a dsr1 coming and I’m planning on installing deaf bonce 6.5 Sylvester’s and tweets on a deaf bonce ab400.4. If I do need the LGD would I need a set for front and rear?

I am curious how much to you charge for this installation.

Does anyone know what year and engine this has? Wonder if the owner can reply :)

I've had other pros in your same field tell me that load generating devices aren't necessary on a non B&O f150 system. I've also heard that audio control doesn't even make one that produces the correct load for a Ford even if they did need one. Have you guys tried it with and without on an F-150?

Old install. Can now get that clean pre-out with Forscan and soldering on RCAs directly to your speaker wire output. Couldn't ask for an easier cheaper system to integrate into.

Where in Fla. are you located?

All in with labor what would this cost?

If most manufactures dyno test their amps and were HONEST about the power ratings, all those amp dyno videos wouldn't be so popular.

man i could have used you befor i gave up putting in my system i never seen those metra turbo 2 kit lol i still dont understand lol

I want you guys to do my f150

What's with the mickey head and the "up" balloons?

Are you able to do the same but run a amp for subs a amp for door speakers and a epicenter with this set up for the stock stereo?

Wats the name of the plastic

How much is this set up ?

Man i wanted this guy to do my install but 2k plus miles away from me 😭

what about a frame ground? bolt the ground to the frame?

Hi I have a 2022 f150 supercrew. Just curious on what the cost is to have something like this done if you don't mind saying. If you don't want to I understand.

Do you need a dsp for an aftermarket radio that has a 13 band eq?

That plate behind the dash is killing my o.c.d ... square it up. 🤪😜

Very nice, very evil!

Do you think the new ford bronco sport with B&O system needs a load resistor??

👍😍👍❗

Low was 5 volts Dean not 10

I hate fake engine noise

2 hours later he installs

I don’t trust any audio shop around me. For some reason I doubt they go this route

ارجو ترجمة بالغة العربية

ANC = ACTIVE NOISE CANCELLATION

T R U C K !! It’s not a car………🤦‍♂️. Other than that, y’all are great!

Love your video but your explanation of what you are doing between minutes 18:00 and 22:00 is about as clear as mud..