A Tiny tool grinder. Part I

Рет қаралды 8,088

Жыл бұрын

This is the final build of my very small tool grinder. See the previous video's for the prototyping. In this first episode I make a rigid front for the motor, modify the housing for somewhat larger ball bearings with a decent pre-load, machine a new spindle, make a simple POM coupling between motor and spindle and test this new motor-housing-grinding wheel combination.
Music (no copyrights):
Alex Productions: Anmor
Limo Recording Studio: Mozart Piano Concerto no. 17 in G major - III.
TimTaj : Inspiring Piano

Пікірлер: 20

@Michel-Uphoff Ай бұрын

I have now received a great offer from a friendly KZfaqr. He is willing to make drawings of my Tiny Toolgrinder! So, if all goes well, a video will be released soon with drawings and some detailed information about the construction.

@colincreedtattoomachines Жыл бұрын

Terrific job Michel on refining the overall unit & utilising the prototype parts, Well done!! Looking forward to the next instalment.

@johnlambo135 Жыл бұрын

Prachtig gemaakt. zeker de tool die je gemaakt heb om tussen de centers te draaien !!!!!! Ook de handpers is mooi ;-) Kijk uit naar de volgende video ..

@Michel-Uphoff 2 ай бұрын

There is a lot of demand for working drawings of this mini grinding machine. But I don't like spending many hours behind a CAD program to make decent working drawings. However, if there is anyone who enjoys doing that and would like to volunteer for it, that would be great! I have photos of every part, and almost all the important measurements are included. That could be a sufficient source for a set of useful working drawings. If that works, I will make an extra video with some detailed explanations about the materials and construction and of course you will also get all the credit you deserve in that video.

@thomaskaemmerer608 Ай бұрын

Hello Michel, I follow your account a long time and I love what you do here. I am a engineer and I can and will draw your Design in CAD. I use Solidworks. If you like, please contact me... I will be glad to read from you shortly Regards Thomas

@Michel-Uphoff Ай бұрын

@@thomaskaemmerer608 O, Wow! That's a very welcome surprise Thomas! I don't have your email address, but you can find mine on my home page of this channel (it's somewhat hidden for the spambots) Shall we discuss it further by email?

@homemadetools Жыл бұрын

Nice followup. We shared this video (alongside the previous ones) on our homemade tools forum this week 😎

@Michel-Uphoff Жыл бұрын

Nice. There will be at least two more video's before the tool grinder is finished, probably three.

@homemadetools Жыл бұрын

@@Michel-Uphoff Good to hear. Let me know if you want a free premium forum membership, and you can post your videos on the forum whenever you want (including any old tool videos you have). We have many YTers doing the same.

@viswakarmaanilbhai8313 3 ай бұрын

🇮🇳🙏👍

@en2oh 8 ай бұрын

that is a clever lathe dog. Is it your design?

@Michel-Uphoff 8 ай бұрын

Yes it is.

@taranson3057 Жыл бұрын

I’ve never seen a vise mounted on a milling machine in the orientation that yours is, is there a purpose behind it?

@Michel-Uphoff Жыл бұрын

When I have to mill small parts (and that is very often), the max 8 cm distance between the jaws of this small machine vise is more than enough. When I place it longitudinally, nothing sticks out of the bed, and it can be accurately aligned very quickly with two precision parallels (one snugly in a T slot, one between the vice and the one in the T slot). You can probably see that in a video of mine somewhere. Alignment takes a handful of seconds and works very accurately. So this is the preferred orientation when I know I don't need to do that across. Sometimes it is simply necessary, as in this video when sharpening flat edges on the rotor shaft. The Y-axis has only 11 cm range, which would be insufficient for this task because the 10 cm cup wheel does not clear on both sides of the workpiece.

@Bakafish Жыл бұрын

It looks like the tail stock was deflecting during those between centers cuts.

@Michel-Uphoff Жыл бұрын

In fact, the whole lathe moves (look at the rag hanging at the right). But because the tail stock is closest to the camera, you see it moving the most. I still have to secure the lathe, which is now on rubber caps, to the workbench.

@Bakafish Жыл бұрын

@@Michel-Uphoff Yeah, I saw that, I wasn't trying to root cause the reason. What I meant is that it looks like the tailstock is moving in relation to the spindle, like the bed is twisting. It may just be an illusion and it is moving monolithically, but getting that bed bolted down to something stiff will likely help things.

@Michel-Uphoff Жыл бұрын

@@Bakafish Yes, it's an illusion, I would have noticed any deflection in 2,5 years working with this lathe. That said, bolting down will help image stabilization when the camera is on it's tripod. Real soon now.. 😇