The biggest thing i took away from this video is that you're a good businessman. You sent videos to your customer to explain what was happening throughout, and didn't go through with the repair when you found out it would be cheaper just to get a new gun. I like that shit. Right fucking on, bud.

For Sale: Valken M4 Easy fix just don't have the time.

I'd love to see a proper "what brands aren't shit" guide for internals/barrels/rubbers etc. With a corner of cuntery section for all the stuff that is for absolute perverts like R-hops and blue prowins.

Can we see some of the ferrets!

Can you give an update on the Valkin, what did the owner do? Did the shop that put the glue in the case step up and get a new one out to him and maybe back to you to make it RIGHT. Fantastic channel and ya lets see them ferrets.

Why buy a TM and gutt it 🤷🏻‍♂️ buy something cheaper and upgrade it with parts that work and still of payed less overall. Great work as normal 👍

Woo another video. Learnt so much from you it's unbelievable. Love the no nonsense videos you produce

As a aspiring tech, your videos are a wealth of knowledge!

The cursing never gets old, love the simplicity and love of a "fuck off"

“ I am a airsoft tech - I work at an airsoft shop”

Calling it now - TM Recoil has been upgraded and has a Titan installed... Why do people do that? Buy the "best gun in airsoft" only to break it by doing necessary upgrades? if its the best gun, it doesn't need it...

I have to say he’s becoming my favorite Airsoft tech! Brutally honest and knows his shit!!

Sad to see the problems the owner has received, but good to see theat they have you to go to & show them the seriousness of what's going on.

binge watching again...After watching this again, I just worked an AEG last week with a titan in it that had the same low voltage error, motor buzzing etc. I found the motor connectors to be the culprit. Replaced them (with a dab of solder on the wire connector end and the error went away. Just something to check next time you get this.

Low battery warning on the Titan, some of them do it, there’s a setting to turn off the alarm in the control station. Can’t be arsed to sort out a return and fit a new one though.

I forget how I got hooked up to your KZfaq channel I don't know if it was burnt wolf airsoft or one of the other airsofters we follow. I am very new to air soft I am 54 years old. And I'm bringing my 10 year old daughter in this year. The 1 thing I do have to say is if I ever need my gun fixed I would like to send it to you. I do live in the U.S. but I still would like to send you my stuff to get fixed. You know your shit!!! And I am impressed 😎.

“This has been modified without taking the rack out of the piston” *Hey! I do that and it works great*

I've got a Valken ASL Tango and was impressed so got my boy one too. Out the box is a solid performer, and with a cheap mosfet fitted and a shim job it's running mid 340 fps with decent RPS, not bad for a cheap gun really.

Hey there, I was wondering your opinion on ICS M4's in general and the split gearbox vs standard? Many thanks and keep up the entertaining videos man!

I can see why the frustration sets in. I take down notes on do's and don'ts and by golly i'm thankful i try to do my research first before i go off on buying parts that are "Top of the Line". Also love the sarcastic remarks you have and your humor too. Recommendations on a good Red wine?

You have ferrets?!?! I like this guy a lot more now

This Guy will give you an honest appraisal for the work and work hard to give you a working toy back for an honest fee. Check out his own collection and you will know he loves his toys as well and that's not including co-running a new site to use your toys at. Honest and hardworking but most importantly a techie that really does know his shit. For me now i just love watching his vids and hearing his banter, so send him all your toys to upgrade or just fix.

I while ago I did the same cut on the gearbox to be able to fit wiring in it and I have to say that it works perfectly fine,specially with thick wiring which hits the motor shaft when you try to insert it in the gearbox. Try it,it'll make your life a lot easier

The “silent” piston head. Still experimenting with those.

superglue comes off easy as anything with just a little bit of acetone

The “Bleeping” indicates the amount of cells in the lipo if you slap an 11.1v it would bleep 3 times 👍🏻

What hop rubber did you use with the shs barrell and what degree was the rubber.

I could only find steel finished 6.03 SHS barrels in the local shops, are they as good as brass one?

if you want to get the super glue off, instead of using any chemicals use a hobby knife with a flat blade and use it to carve off the super glue. it takes a while but it comes off. done it before on a would surface, you just have to be gentle to reduce any damage to the inside

I think the new Valken guns are popular because they come with a one year warranty, when I went to my local shop the owner was trying so hard to sale one to some kid and that was his only selling point

Sick music👌🏼

I love you Mate the Gordon Ramsey of AT

Gordon Ramsay of airsoft teching

Still the best zippy impersonation ever

What mapple leaf did u use i have my tm too same rubber i use

Hi there. Just a question. I can't find a maple leaf rubber in my shop. What's the best alternative? 50° Guarder?

What sort of prices do you charge for fixing a gun?

Looking forward to getting a knock on the door for sending something that looks like an AR to NI xD

Which maple leaf bucking did you use?

Don't think that the upgrade cost determines the upgrade quality... Is what I learnt from this

The handguard on the valken is pretty dope. Any one know what that is?

Damn... This was a horror show! But a very entertaining one!

Hey I like my Promy barrel, I did buy it 3 years ago and their QC might not be as good but the one I have is perfect

did that recoil have a shaved nub on the grip?

Did you just use super glue and tape?

I do often wonder if the techs that worked on some of these guns in your videos @Negative Airsoft ever watch these videos of you ripping apart their work .... I can honestly say that Mr Dobson is hands down the best tech I've taken my gun to... and this is after me being given the run around and ripped off by other techs!

My valken asl is quite durable . I like it , I mean it's a direct ripoff of a g&g but the gear box is pretty good.

I hear valkens are just rebranded SRC guns, but correct me if Im wrong. Anyways, do u like the ZCI barrels? They're 6.02 and work pretty well for me

it baffles me how badly some of these retailers do this stuff. I had a 416 that had been sent to a retailer and the job they did was absolutely awful. The soldering was appalling and the standard of work was shocking .

I don't get why you would buy a TM to strip it. Just get a specna or something if you are gonna replace everything anyways.

I have a feeling shops do shit like that to that valken to try and get people to buy completely new guns instead of fixing them.

Do you do hpas

I’ve seen in an earlier video you had a double bell 416, what are your thoughts of it?

Never use super glue near done except for AOE correction

Why didn’t you just remove the glue with alcohol?

Can of beans in a fucking washing machine 😂😂😂

Its a good looking gun but RIP the guts of it.

titan basic mosfet got a fault were it thinks alle batteriers is low voltage somtimes i just turned it off and know the guns works flawless

I want a tm recoil but not for retail. I’ll wait for someone to give up on one

Hi, so I'm looking to get a Krytac Lvoa C and due to the rules at the field I play at the limit the fps to 360 so I already know that i have to back it down any tips on which spring I should get to do that?

Do you know what hop units will work with a classic army? Haven’t found any so far that fit :c

I fucking love your vids

Can you just desolder a gate x-asr and solder in a gate warfet using the same 3 wires or do you need to run new wires?

Ultimate question is, was the joke supposed to be a drinking establishment or a World War II joke?

Negative airsoft thinks Titans are a c**t lol I've got a valken asl bought it when my bolt m4 sopmod decided to chew itself up pretty decent out of the box I've since changed the barrel to a tomtac stainless steel and it's a brilliant back up loan gun lol might have to send you my bolt m4 soon

yep!! Knew it!! That is NOT the stock valken piston, cylinder, or cylinder head or spring. Dipshit probably was trying to make it a high speed gun the WRONG way. WAIT!! No sorbo or ptfe tape?!! At least he radiused the gearbox. LOL...the TM...why oh why do people insist on using ultra TB barrels?!! they cause more problems than they solve. Every single one of my aegs use 6.05 barrels or crazy jets.

This shit is why I never use prommy in my recoil shocks haha

God, I loves me some fuckin exposed wire.

I wonder if the dislikes are from the airsoft shop you mocked (rightfully so)

Ha would you like to do some work on my M4 and pistol ?

My titan beeps after I fit a battery, thought it was just a normal thing, 2 beeps for 2 cell and 3 for 3 cell (7.4/11.1)

Oh man, whoever glued that gearbox should be sent to the fucking hague for trial

I'm not saying you should be expected to do this or anything, but if an actual shop tech has fucked up a customer's gun this much, do you ever think about publicly slating them for it? Its sad that someone paid a shop thinking that valken was being repaired properly

This probably sounds stupid but when installing deans connection does it matter which way round they go and if so which way round do they go?

I've used superglue today to make an 100% airtight hop-up :))....only way to use superglue in a good way in airsoft :))

5:03 hahahahaha

Someone get Evette Fielding in because that shit is haunted.

That Valken was amateur night on steroids...

do any of you have any good mp5 suggestions?

What maple leaf did you use for this ?

hey can you put a brushless motor in an aeg ?

Can you recommend a specna arms for a DMR build?

do you have a website?

easy fix remove the super glue ;)

You my friend are fucking funny as shit

I think you should have put a meme when you found the super glue hahahahah By the way please lower the volume of the music, there was a bit that i almost failed to hear when you were talking

I love the hate! People buy and upgrade recoil shocks because they have the best recoil system in an AEG. They are made with weaker parts because they are designed to shoot sub 300 FPS. You MUST upgrade some parts if you want one shooting 400 FPS and not fall apart over the long term. People (like me) do this because we want the best experence. I want recoil and bolt stop function and I do NOT want to mess with the low ammo count and inconsistency of a GBBR. After owning one and using it for years I will never buy an AEG thats not a recoil shock. After feeling the recoil and getting use to the bolt stop function I would prolly quit airsoft over the option of using some non recoil shock gun. Hearing the internals of your gearbox instead of the clang of that bolt going back and forth is just gross! Sometimes in life its not always about getting away with the cheapest deal possible. Sometimes you just want to own something thats really nice and everything you wanted...

People come here for cursing and ferrets 😂😂... oh and airsoft

I love my Valken but the hop up bucking is shit. Other than that decent internals for the price and decent quality externals. It's pretty standard nothing special.

I don't really see a problem here? I always fill my gearboxes with superglue.

I WISH YOU TOOK GUNS FROM THE US😭

i have a g&g combat machine mod0 and i wanna know what to upgrade internally to get a nice quick trigger response with no clunky fucking sound

Bum Sausage

Costs more to fix your broken car then it would to buy a new one? Your airsoft gun is totalled

this kind of thing is pretty much how my life goes as a harley mechanic. it's fucked and this is what it'll cost to fix it, just go buy a new one and don't fuck it up.

First :)