It’s a great shame that guys with skills like he has will be lost, as the next generation do not seem interested in that type of engineering

Engine steve is a top man . He did a ford 7610 engine for me last year and because i was on my own he stoped and helped me lift the head and sump on .

The engine machinist guy is amazing. Loved the juxtaposition to fixing the auger farming style - 3 blokes, a blowtorch and a long bar.

Rebore man, proper old school engineering. Brilliant video again Olly 👍👍

The big case, 7710 and JCB

Precision engineering at its best clearly a very skilled man I could watch him for hours 97% today great blog 👌

That tennis ball holder is awesome I would love one! 👌🏻👌🏻🎾🎾

Loved the reboring section. I had no idea this was a thing. Now I’m off to watch some rebore KZfaq videos - thanks

Big case,936 and the Deere.

Great ecc & Kelsall are on 👌🏻👍🏻

Not a boring video today, very interesting to hear the engineer

Big red, 7710 and the 1455 for the steam rally.

I had the same boring done on a 1594 15 years ago, it was difficult finding someone then. Also his machine didn't have a vacuum cleaner attached so alot more cleaning up was involved.

Nice One Olly The Rebore interesting to see 936 cropmaster & fastrac Thanks again

Hi Olly, thanks for adding Arthur to the birthday bumper today he couldn't believe it!! All the best, Stuart.

Was a precision engineering company at Durham used to all engine repairs re-bores, head surfacing. That engineer man is a specal man

Really interesting video of Steve reboring the David Brown I’ve never seen it being done before. I think it would be good to take Black Beauty, The big Case (can’t remember the number) and the Fastrac ??? I like the general farming repairs also, especially Rob panel beating the shed! and you trying to remove the hammer head with a 4 foot long Stilson. 80%.

What a fantastic machine that reborer is and a clever man using it nice bit of Auger straightening .i do like your tennis ball holders id take Fastrac Black Beauty and the JOHN Deere to Kelso feeling 99% today great video Ollie Eddie

Big case, mb and 4955 scare a few people! Should get to Kelso if not to busy! Some great knowledge from rebore guy!

Superb blog Olly. The reboring of the 1690 engine was fantastic to see! Wow - what a remarkable engineer he is!! Great repair to the boiler ash auger, certainly sorted that. Unbelievable what you do.

Steve doing a top job as usual…. Go on Steve x

the aspect ratio is kinda wierd today. anyway interest to see how to bore a block

That was brilliant seeing that guy boring out the engine block. Thanks for showing it.

Hello olly iam 75% today it’s been a miserable weather day

Great vlog as always Olly. That was really interesting to see how the cylinder was bored - he has a neat bit of kit there. I’m not keen on the 4:3 aspect though - 16:9 is far better IMO

Loved the slow mo on the rebore, I always wondered how it was done

Fantastic to see a man with such skill working on the engine. I think you should take the big case the 936 and the 7710.

7710, fastrac 4220 and the Biggest Case (lol can't remember its model 😭)

100% making more of them, very handy

Deadly video. Great to see the block getting bored. Always wondered how

100% today... Had to wait nearly 10,11 months... Thanks for Birthday Bumper mention. BLACK BEAUTY, BIG CASE AND MB TRAC SHOULD GO

Hi olly just wanted to say it was so nice to meet you and charlotte and baby james in person yesterday at tractor fest i was the man just near the plant stall just after the number plate man i was with my grandaughter in the pushchair and my wife it was so nice of you to take time out of your day to say hello and chat hope you had a good a day as we did love the videos keep the good work up p.s love the real country fill.

I would take 7710, black beauty, and big case

Good vid Olly, hard day? seems like that auger would be better with an all metal slats and chain conveyer if there is one small enough. Big red for Kelsall. 😜

Really interesting vid. Keep em coming 👍 Take the 4494 and 4955

This is great to see !

I am hopefully going to kelsall steam rally, looking forward to it!

Very interesting, never seen an institute cylinder bore only heard about them. Saves so much work taking the engine out. Probably isn’t that much call for it now I don’t know, shame if nobody picks up that knowledge and carries it on

That’s a dieing art reboreing cylinder’s especially on site another bit of proof of our throw away age which is a shame but great video I could of watch him do all of the cylinders 🤷‍♂️👍👍

Be careful with the blow torch on concrete, once seen a piece of concrete floor explode becuse of a bit too much heat

That's great Olly you showed us something that the average person wouldn't get to see really intresting mate thanks. 1455, big red and black beauty

Great video video olly jaysus that’s some machine for reboreing savage job I think the big case and the 77 I’m 95%today

What a skilled man Steve is and what a shame there are very few of the next generation who what to go on the tools. 😱 I would take the 936, 4955 and the big case. Feeling 90% today 🙂

Great content again

I'd take black beauty, the big case and MB track great video olly 🙌🙌👍💯

Great video Olly

Another great video Ollie, enjoyed watching the engine re-bore, top man, take yr dad's David Brown :-) nearly 100%

We're going to Kelsall with some lorrys I would take black beauty, the 7710 and the big case

You should take the 7710 mb track and 1200

Great video olly, is the auger straight still? Black beauty, fastrac and one of the cases. Good to see the dB engine getting worked on. 97%.

Take the best all three CASES

Precise work there! Seen that job being done alot over the years! MF 35 3cyl had a thin lip liner and when replacing with new liners the block had to be bored out and a lip put at the top to stop her pulling the liner into the sump! Did you put insulating tape over the oil galleries on the crankshaft? To keep chips of steel out! Won't help the shell bearings. I'd get a body shoot gun and a gallon of thinners or gun cleaner and give that block a good washout! There's always wee bits down the side of the main bearings.

Brilliant video olly 😃 97% today

Andrews jd, the mb trac and black beauty I think should go to the steam rally

Take the 7710 and case black fent

john deeres and black fendt

The 1494 936 and the 1455 I think

Olly, is there anyway you could fit any sort of big magnet inside both the auger and chipper to catch any big pieces of metal that are regularly causing you grief? 90%.

Definitely take the Black Beauty and the JD 7710. Maybe the MB Trac? Feeling 90%today. Students back and prepping for their final exam 😭👍🤞

Finally a solution to my tennis ball dilemma. I'd 100% purchase one of them ball holders!!!

I’ve a feeling the 1200 wouldn’t pull straight but it’d be a good watch. For me it’d be 7710, 4955 & 936

Shame you couldn't take the bateman up, thats definitely the highlight of your channel

I'm going to Kelsall myself I think the MB black beauty an the big case

You should definitely put both mowers on the John Deere 7710. Give her a good days work

What great guy! Mechanic/ Enganieer!!! Lot of skill as everyone saying possibly lost! My 3 choice Big Red.Black Beauty! And what about your Dad's tractor Good 3 generations? Charlie BC 🇨🇦

I’d take the 4494 7710 and the 936..

If it was me I’d bring the 7710 the big case and the 939

Take the 1200 to Kelsall, you wont need the steering working while on the sledge!!!!!. Did you get the crank journals measured while the rebore was being done?

Sorry am late for replyingyesterdayvideo. Kelsall steam rally 100% going and i can't wait. Olly i think fendt black beauty case articulated and john deere 4955. P s sorry for late reply

That bloody ash auger causes you boys some trouble

Olly, why dont you put some coarse mesh over the auger so you dont get all the big bits of metal jamming it?

Come on Olly . Cover the unions up om the injector pump please.

Do you have any walking floor loads of chip going north east? Would love a look at all your machinery 😂 and a good back load too 😀😃

It's got to b Black Beauty, the noise John Deere and the 1455....

Steve the engine man needs a KZfaq channel of his own about his work. He would get loads of subscribers. Good job on the auger young man. I presume you will put handle on the hammer head and make it a thing of purpose?

I would take the Black Fendt, Case 1455 & Deere 4955 to Kelsall. I would love to come up and see them but will be away. PS. Olly you haven't put the gentlemans contact info up who bored the engine out on the DB! I think I maybe requiring his services.

Can’t you put some sort of mesh covering the Aurger then rake any bits out like we did in the old days on coal fires ?

🚜🚜🚜🚜🚜😎😎😎👍

Hi Olly, do you think it would be worth investing in an induction heater considering the amount of maintenance you guys do? Safer and quicker than the gas torch

Using tennis ball clips, I wonder who said that before….

Boom

Steve did a great job boring the cylinders out. I love anything like that and such a shame it's a dying art these days 👍 are the ball holders 3D printed? Great idea 👌

It would be great if people with his skills would be given tax breaks to train and people learning be also , might help they are few and far people of that quality these days

Definitely take the 939 there quite rare so that’s a must and take that case and the JD to the right of it

The reason people with skills like the engine machinist are few and far between is because the youngsters of today dont want to learn the skills which is such a shame. Another busy day on your farm, always something to do.

The maxum !! Is it a pro ? Amazing tractor they were

Lock two nuts together to remove/refit the head studs, saves chewing them up with stillsons

What a bloke Steve is. No-one would think about an engine rebuild these days, you don't see people working on cars on their drives anymore. 55% today knee still bad so can't go back to work 😫

Take both deeres and the 1455

The rubble in the green waste has me wondering what the deal is with this diversification ? Do businesses pay Olly to take their waste to process and sell on ?

u reckon ive nearly watched every vlog video u have ever posted

Has it drawn a straight line… Not really 🤣

4955, 724 and 7710