A93 Keeping twin turbos cool. Oil and coolant lines w/ Evil Energy Review. Arete Supercar project.

Рет қаралды 13,816

3 ай бұрын

Twin turbos equals twice the heat, twice the space and twice the connections. See how we manage plumbing it all together with Evil energy AN fittings and braided hose. #Evil Energy #Evil Energy Review
Evil Energy Official site: bit.ly/48Hv2E2
Get 10% OFF for All: Use code JAY25
Components used in this build:
Evil Energy inline-fuel-filter-100-micron: bit.ly/42cMxcR
Evil Energy an-union-fitting-female-to-female-straight-swivel: bit.ly/3SsiURF
Evil Energy hose-ends-straight-ptfe: bit.ly/42fjmWz
Evil Energy hose-ends-ptfe-90degree: bit.ly/3SsKxdm
Evil Energy an-fitting-adapter-90-degree: bit.ly/3SxamsR
Evil Energy an-hardline-tube-nut-and-sleeve-aluminum: bit.ly/3Hx68Ly
Evil Energy an-coupler-union-an-adapter-fitting: bit.ly/3OhbSg6
Evil Energy an-weld-on-bung-male-aluminum: bit.ly/3HuCMNB
Evil Energy 30-micron-inline-fuel-filter: bit.ly/3SsPbbk
Evil Energy external-inline-fuel-pump-300lph: bit.ly/3u4P2Br
Evil Energy 6an-ptfe-fuel-line: bit.ly/4b9ViIL
Evil Energy hose-ends-straight-ptfe: bit.ly/42rlsD7
Evil Energy hose-ends-ptfe-90degree: bit.ly/4b7wu4c
Evil Energy 4an-ptfe-e85-fuel-line-hose: bit.ly/3UaZJgi

Пікірлер: 75

@discipleoftheword1785 3 ай бұрын

I’m a big believer in shut up and watch. I enjoyed the transition to the overlander.

@BuilderCreator 3 ай бұрын

Shut up and watch is good, so is an occasional positive word or two in the comments! Thanks for watching.

@francoisr.7069 3 ай бұрын

very excited to see the first test drive, from Quebec. People around the world is watchong your channel. 👍

@francoisr.7069 3 ай бұрын

Sorry, watching.

@BuilderCreator 3 ай бұрын

Around the world? Quebec; we are practically neighbors!

@asten9647 3 ай бұрын

From malaysia❤❤

@quakxy_dukx 3 ай бұрын

Australian here

@chownc 3 ай бұрын

Aussie here too

@billlichirie14 3 ай бұрын

I can hardly wait to see the finished car, 😁👍

@Harikarikillboy-fs5vl 29 күн бұрын

Getting stoked to see this roll! Gonna be a screamer with that engine.

@wikuscombrinck512 3 ай бұрын

Hello from South Africa!!!

@rjung_ch 3 ай бұрын

Hello from Switzerland

@BuilderCreator 3 ай бұрын

The far end of the dark continent! Glad to have you along!

@motjuste8549 3 ай бұрын

It's going to be beautiful.

@myopinion69420 3 ай бұрын

Nice to see you are getting sponsors. Just be careful calling anything a 'review' when it's sponsored in any way, no matter how honest you are it can still look bad.

@BuilderCreator 3 ай бұрын

Semantics! "Review" signifies I once viewed it before. ;)

@luisvene7 3 ай бұрын

I'm so excited for this creation.

@Mikelectric 3 ай бұрын

ur spoiling us

@BuilderCreator 3 ай бұрын

Spoiling you just like a bad mother! Better than a whipping by a bad father!

@rennch. 3 ай бұрын

Nice one! Just ordered all the fittings to do the exact same thing to the blasphemy build!

@BuilderCreator 3 ай бұрын

Hey @rennch! How is the build going? Hope life is a little smoother lately, and you can get Blasphemy on the road again.

@rennch. 3 ай бұрын

@@BuilderCreator Since the craziness has subsided I've been making VERY quick progress!!

@martinbeaumier7172 3 ай бұрын

Can’t wait to see it run!!

@hinga9895 3 ай бұрын

Excelent work! Keep going

@sillysigma422 3 ай бұрын

Watching this series has let me learn so much!

@UnityFAN 3 ай бұрын

Supercool channel, excellent progress!

@54mgtf22 3 ай бұрын

Hi Jay. Love your work 👍

@rjung_ch 3 ай бұрын

A lot coming together, thanks! 👍💪✌

@BuilderCreator 3 ай бұрын

Could I actually get back to a weekly video?

@BuilderCreator 3 ай бұрын

Hey @rjung_ch. I see in another comment you are from Switzerland? I'll be in Switzerland in July. What city?

@rjung_ch 3 ай бұрын

@@BuilderCreator cool, I live less than an hour away from Zürich. Where will you be going to? If you want to catch up, that would be a fun experience.

@rjung_ch 3 ай бұрын

@@BuilderCreator About weekly updates, if you have the time and energy and material to show, I bet you'd get more views and input as well. Your call, if you do, I'll be here 🙂

@AndreUchoaUSA 3 ай бұрын

Can't wait to see this beauty ready!!

@BuilderCreator 3 ай бұрын

A little here and there and pretty soon we will run out of heres and theres and the only thing left will be to turn the key!

@clydecox2108 3 ай бұрын

Absolutely lovin it. Can’t wait to see you drive the little beast. You rock…

@BuilderCreator 3 ай бұрын

At least get it rolling on its own or color on it! ;)

@chrispickard3337 3 ай бұрын

I've used and will continue using Evil Energy parts! Great product!

@BuilderCreator 3 ай бұрын

Even though, however, we are not evil! ;)

@keithyoung7 2 ай бұрын

Brilliant - Charging ahead - really impressive - I have been following along, and with an interesting project and masterclass skill level, I was expecting at least 1 million subscriptions by now.

@BuilderCreator 2 ай бұрын

Do you know that KZfaq shows me who in the comments is a subscriber? It's hard to reach even 100k when @keithyoung7 isn't a subscriber. ;) Thanks for following the build, however.

@keithyoung7 2 ай бұрын

@@BuilderCreator But I am subscribed and have been from the beginning. KZfaq telling fibs.

@BuilderCreator 2 ай бұрын

@@keithyoung7 KZfaq has been known to skew the stew!

@keithyoung7 2 ай бұрын

@@BuilderCreator Ah - some of my political views do not align with theirs - and the tolerance level is near zero - however, I am a fan and subscribed.

@sig5816 3 ай бұрын

Cool to see the progress, can't wait to see the headers!

@BuilderCreator 3 ай бұрын

Can you wait a week?

@sig5816 3 ай бұрын

@@BuilderCreator I'll try 😂

@billmeldrum2509 3 ай бұрын

Very cool. 🇨🇦

@justindastar 3 ай бұрын

been watching this project for what seems like years, really getting close to operational.

@BuilderCreator 3 ай бұрын

Doesn't just seam like years, it has been years. Ha! Getting closer though.

@ronkluwe4875 3 ай бұрын

Really interested to see how the headers come out. Will bring new meaning to "bundle of snakes" 😁.

@BuilderCreator 3 ай бұрын

That will be two bundles of three snakes each! ;)

@barnabyjones5161 3 ай бұрын

The most exciting project on youtube.

@BuilderCreator 3 ай бұрын

Let's just say, "most interesting project on KZfaq." Excited is what we are when a new video comes out. ;)

@barnabyjones5161 3 ай бұрын

@@BuilderCreator i absolutely concur.

@suchoi61 3 ай бұрын

Danke!

@BuilderCreator 3 ай бұрын

Thanks, @suchoi61, my mother died last year from Congestive Heart Failure.

@anomamos9095 3 ай бұрын

Tip Don’t forget the pressure, flow restricters for the turbos. There are two types of restricters depending on the bearing type of the turbo. Forgetting these can blow out the oil seals in the turbo resulting in oil smoke and possibly hydro locking the engine. The loss of oil pressure can also destroy your engine because the oil is now going straight to the sump and or out the exhaust instead of all the bearings.

@BuilderCreator 3 ай бұрын

I have made a slight modification to the cooling side, but the oil system is exactly as it was on the original system. Any problems we can blame on the Toyota engineers from the 80s. ;)

@anomamos9095 3 ай бұрын

@@BuilderCreator . I wasn’t really commenting on your build, just a general reminder to everyone. However I think updates to turbo oiling systems have been done by Toyota since those turbos were first used to solve the kind of problems I mentioned.

@lvn968 3 ай бұрын

I was wondering if you maybe also put a twin turbo on that lawn mower that appeared in this video 😅 ?! Wouldn't surprise me if you did......

@andrewkazanova5751 3 ай бұрын

can you put some videos how you make your snc

@BuilderCreator 3 ай бұрын

Not sure what an SNC is? Sub Nuclear Components?

@diysecuritygear9594 2 ай бұрын

I made a really bad comment a year ago. I cant believe you're still working on this. Freddie will have rebuilt a P1, Tyler will have married a poster girl, Cleetus will have held 4 freedom500 races, Demo ranch has a resort and here we sit.

@diysecuritygear9594 2 ай бұрын

Buy a lotus.

@BuilderCreator 2 ай бұрын

Thanks for being a subscriber. Talks 900,000 more people to sub and I can replace my income with a dedicated KZfaq life.

@race-19 2 ай бұрын

My Ambition is to build the fastest car in the world

@BuilderCreator 2 ай бұрын

Is that a salt flats car, 1/4 mile car, production car?

@discipleoftheword1785 3 ай бұрын

Those turbos are strange. Usually the oil feed and drain are on top and bottom for proper drainage. Also the water cooling is put on the same side. Be careful.

@BuilderCreator 3 ай бұрын

Thanks, we will watch them close!

@LSXREVIVAL Ай бұрын

I’m I losing it or is this a FWD. car ?

@BuilderCreator Ай бұрын

All WHEEL DRIVE

@bobolulu7615 3 ай бұрын

Just a comment. Shouldn't you use separate water cooling feeds to the turbos than the series one you have? The water, after coming out of the first turbo will be hotter than what went in, so in effect, you're putting a hotter temperature of water into the second turbo to try to cool it. Using the formula Delta.t. the second turbo will run hotter.

@BuilderCreator 3 ай бұрын

They are in parallel, not series. Sorry if the video was confusing. Thanks for the comment and being a part of the channel.