this is literally the best video ive ever seen to cover this subject.

WOW.... love the clear and specific instructions. Plus thank you for the high quality resolution of your video.

Very good. Very thorough. Thank you very much!! I wanted to hook up some Xmas tree lights to a power cord an I was looking for ways to step up (transformer, etc). I never thought of using an USB. Ingenious! Thanks again.

Thanks man. Really nice job and well shot video.

Nice, very clear and hands on.

Ok. Is there any way to turn 5 different lights into 1 USB powered light? They are all 2AA and I'm sick of switching them on and off one by one. Please be kind to this old lady since she knows nothing about electronics, but willing to get all the parts and tools to give it a try if that is at all possible.

Thats a really nice camera quality, it helps alot for these small electronic videos so thank you. Also, this is a much cleaner way to do the same thing I was trying with a step down converter that kept overheating so thanks for that too. I am going to order some resistors now and give it a try on my EL light strips that have almost the exact setup as your lights.

Well done, and this is a good video to teach us DIY our device

Awesome video thank you!!

Great info! Thanks!

this is a SUPER professional video for those who want to do it the RIGHT way. but for me don't have all that lol and with the closing of radioshack I don't have easy access to resistors and desolder and whatnot. i just gamble on the extra 0.50v not frying my light 🤣

Thanks for posting this video

Oh... So it requires a resistor. Haha! Im just trying to do everything myself without much knowledge about electricity and stuf.. But thanks to this.

Dude, I love the way you explain and get to point and teach!!! Im not to smart but I think I can do this!! Please post more!!! Also what was that thing (Recestor)you put into the Neg part ,, like how does that work??

I would love to switch multiples on all at once! This was the best instructional video I've seen! How does one formulate strength of resistor? Direct, Easy to follow.

nice, i need to do this now to my doom eternal collectors edition helmet wich has lights in it

I really enjoyed this video. Thanks

Thank you for this video 💙 and if my garland has 4.5v, I just need to properly solder the + and - to the USB?

Thanks for the video! If I have a block of 2 batteries (3V total), how to cut voltage in this case? Thanks

Do you need a resistor if you’re connecting it to a 3V wall adapter?

Thanks for a great video! Question: does the orientation of the resistor matter? In other words, does it matter which end of the resistor goes on the circuit board versus which end gets the power from the USB cable?

On my controller it looks like it might have a resister (one blue and one black stripe) will I still need to put one on?

How did you come about your calculation?

Super awesome!

What resistor to add if it uses 2 AA batteries?

I'm sorry your video is excellent I just had a question about the resistor

informative!

Brilliant!

Can I use the same resistor on any those kind of lights? Or do I have to do more research?

Very good video, thank you. Your clamp is really great, I would like something more stable than the helping hands stand, what is it?

Could you do this in reverse? How do you power a 5v, 2A heating pad from batteries?

Hey there, a very interesting vid thanks for sharing! I have a small water fountain pump. I would like it to operate on batteries instead of by a plug, the opposite to this video. I have cut the plug off and there’s two copper wires, would I need to somehow connect the two wires to a battery capacitor? Thanks in advance!

what resister did you use

My circuit board isn't labelled 🤔

So I have this "fairy lights" kind of led light strings. They are powered by 2 3v cr2032 button cell. They don't have any kind of pcb boards. They are just straight up power switch and battery contacts. I want to power them via usb, do I still need to put a resistor on it? If yes, how many ohms should I put? And which wire should I put it?

The first time I ever did this I didn't add a resistor. Needless to say they started smoking after about 20 minutes lol.

I have a 20 LED bulb looks like the one you have I hooked up a 5 volt charger to it Saturday everything in but I didn't put in the resistor it work good for about 3 hours then the bulb started stopping working one at a time until only ones working if I put that resistor in it should take care of that LOL??

Would this work also for a led string that normally uses 2 AA batteries? Or do you need to use a resistor or something?

Still managed to almost set mine alight :( I don't know what I did wrong

Use a blue Solder Pullit like I have to remove the solder and save some cash. Never touch the trace with your soldering iron unless you have on with variable temp. If you do hold your sharp point tip close to the lead of the device/wire to be removed with a bead of solder on it your solder pullit close. Then touch the solder on the device and the solder on your tip will melt the solder on the lead Trigger the pullit to suck the solder off. 40 years as a professional electronics tech so I just might know what I'm talking about. Same procedure if you have a desoldering station like I do.

Hey man, I have this nice LED Mask that I wanna convert. It has two parts but also has a detatchable wire. Could I just strip the wire and solder it onto my USB cord or would I need a resistor for that too

I made three of those for my sister thanks man.... if it would be possible to show you on comment

Way to much effort! But nicely done because who wants to use 100 packs of batteries lol. I never soldered in my life and omg o really want to buy a battery powered statue but convert it to plug power. Is soldering straight forward or takes long to learn

I keep trying to just splice a USB cord to led lights, and it works but burns them out. One burned out slowly, another strand burned out and started smoking right away. I have another plugged into my pc usb port and they seem to be ok for now. But why is this happening to the others? I know they are getting too much power but why? I just wanna cut the battery box off and splice a USB cord on and be done. The one that slowly burnt out and the one that is working now connected to my pc are the kind that came with the tester switch and cord attached to the battery box. So I just spliced the cable to the tester cord so the power is still running past the battery box, maybe that is why it didn't burn out instantly like the others did, and am assuming its still surviving because its getting less power from my pc than the wall plug. Also, I have no knowledge about any of this stuff so don't make fun of my ignorance, i know I sound like an idiot :(

I'm about to order resistors online, do I get the 100 ohm 1/2w 0.5?

What is the calculation behind this? 5V can be drop to 4.5V by using 100ohm resistor I just want to know so it is easier for me to lower my Volt next time

Wao

Hi. Would a 5v power USB cable work with LED strips that require 4.5v? Is there a risk of overpowering it? I'm a noob so excuse my stupidness. Thanks.

Hello I need some help, new to this type of stuff and would like to solder together some lights please let me know if you can help me I can give u contact info

🎉

I'm confused: why do you refer to yourself in the plural?