Рет қаралды 109,117
In this video I show the steps and procedures necessary to complete a service on a Ford 10R80 transmission. ford recomends you service this transmission every 60k miles. At first glance this seems like a very difficult job since there are multiple heat shields and an auxiliary cooler that you need to move out of the way in order to drop the pen. But overall this is not too difficult of a job. Since this transmission pan does not have a drain bolt, you’ll need to unbolt the pan in order to drain the transmission fluid and expose the filter. A little check that I show in the video is to siphon out some of the fluid before you drop the pan. This makes the job a lot cleaner. Below are links to parts and tools are used during this video. If you have any questions or comments feel free to leave something in the comment section. Thank you for watching
PARTS USED IN THIS VIDEO:
Motocraft filter:
amzn.to/3dtwwIa
seal for filter in trans:
amzn.to/3s6rCFb
trans pan gasket" reusable
HL3Z7A191B-
www.tascaparts.com/oem-parts/...
cooler line seal 1 of 2 (2 needed)
5L7Z7J324A
cooler line seal 2 of 2 (2 needed)
5L7Z7D285A
www.tascaparts.com/oem-parts/...
f-150 must do simple mods
AMP Research PowerStep Electric Running Boards
amzn.to/39XhyH6
Door Handles Covers
amzn.to/36bCpFw
Carbon Fiber Central Control Storage Frame Trim
amzn.to/3ph8Mdz
low profile Antenna
amzn.to/3qRGIxK
Husky floor mats
amzn.to/2Mn64EC
Black Wheel Well Guards
amzn.to/3oeSIaD
torque specs for this job
Sway Bar Nuts (4) 15mm 41 ft lbs
Cooler and Lines 10mm 22 ft lbs
Rear Trans Mount Bolts (4) 15mm 76 ft lbs
Exhaust Clamp Bolt 15mm 41 ft lbs
Passenger Bellhousing Bolt 13mm- 35 ft lbs
If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!!
paypal.me/aaronhinesauto?loca...
Follow this channel on twitter for the latest content updates and weekly Automotive Tips!!
AutoHines?lang=en