Fellers, some of yall are COMPLETELY missing the point, the whole purpose of resurrecting this heap of rust. It's not can I get a decent looking truck to run and drive, it's can I drive a hopeless heap of junk with an awesome patina out of these woods. And why in the world would I want to ruin this patina with a big ol bright red door from another truck??

Watching this expletive free video is a lot of fun.

It's rising from the grave. Old Chevys never die!

I really am enjoying this build about Lockjaw. Good to see it coming along. Those old trucks are coming back. No computers either!

There you are again without your hat! Be careful around all of that jagged metal! You are a man of the earth!

Not sure why but the theme song to Mission Impossible kept playing whilst watching! You’re amazing!

Hey chad, their's nothing like a good Ole rusty chevy coming back to life. Really enjoy watching you brother

Glad you are having fun, I am having fun watching you! Reminds me of the John wayne (?) war film rescuing nuns in the far east using a bus that had turned into a chicken coop and the engine taken out to run a generator...

Was just down in Tennessee last week and yes it is hot down there. Great video

I learned a lot. Thank you for sharing your experience.

This is gonna be one heck of a "will it run" series! It's gonna be epic if you can drive it home in the end, I tell you what. And I was thinking, what if I was a local that used those woods to walk my dog, and I had walk passed that old C20 sitting on the frame in the mud for years, and all of a sudden it's sitting on four tires with new shiny parts on it... I'd be like "WHAT THE HECK IS GOING ON HERE!!???" LOL! 👍👍

You got skills! I’ll take the country life too. 🤠 Looking forward to the day Loc-Jaw drives out of the trees. Be safe 🙏🏼🇺🇸

Saving the unsaveable, your my kind of guy! Really glad I found your channel. I grew up doing this kind of stuff with my dad on WWII trucks.

Geeez, i did not want this particular video to end.

I have built 2 chevy three quarter tons fresh out of the wrecking yards, a '74 and a '78...I'm overwhelmed at the skillful professionalism of this man...I envy you, alot of good ideas I could have used in doing my rebuilds. 🇺🇲😀👍

Your doing just great work on that truck, thanks for taking the time to do this i will look forward to part 4

All it needs is a bath and a paint job and it's a Sunday driver! 😁👌 Tetness shot up to date Chad? 👍enjoy your videos and the work you put into them to give us great content to watch! By the way there are a lot of will it run you tubers out there but I have never seen any do what you are doing here, it's epic.👌👌

Be liking your content. It’s a lot of fun watching you bring those old engines back to life. Brings back old memories of my grandfather.

Man I love this! Great work man! Can't wait to see more.

I hear that the mind is a terrible thing to waste... you have me just near a rolling on the floor at times. I just know you moved most definitely to no. one on the favorite must watch! I can relate to this so well

That truck is not a project, it's a commitment!

It’s always a learning experience Chad ! More Power to you!

I'm loving what your doing mate

This is my new favorite channel. I sure am glad I came across your videos. Keep up the awesome content!

Hell ya lovin it man can’t wait to see it moving under it’s own power great job as usual my friend

Can’t wait to see it going. Great video! Keep up the good work!

I love your perseverance, no matter how much bad luck you run into, you just keep plugging along. Never afraid to get your hands dirty. I like your style Mr. !

You provide a level of detail that most channels miss.

I love this channel and the content. Out of all the build series I've seen this one is the best. I love how you just went huntin in the woods for a rear end. Priceless😂😂😂

Good gawd brother 1st video i heve looked at and im hooked! You dont give up good to see.

Some determination and a whole lot of skill and you're proving a complete pile of rust can come back to life. Great job, I enjoy watching your videos 👍☮️🇺🇲

This definitely has been the very fun little series it's amazing what people will ditch in abandon out in the woods. Got a spot where we do a lot of four wheeling with our trucks no gravel pit it was notorious place for stolen cars to be stripped and ditched on a good day get up on the big hill looking down on the quarry you can see the shine of chrome bumpers and stuff I know they pulled out about 30 cars about 2 years ago out of there and there's so many vehicles just stripped and abandoned out in those woods we actually took an old suburban and made it a bridge it had been rolled and smashed pretty flat dragged it over the creek crossing that's pretty bad and use that as the main structure of the bridge that we built in the truck and the trees but I pulled a few runs out of vehicles out there in a couple motors. This is definitely been a lot of fun watching you do this way better than a lot of those will it run videos for me get some old car drags it home and gets it running what you're doing is well beyond that and much more fun and enjoyable I believe that will it run videos are good depending on what it is they're doing you have a pretty good variety of things you get running again reminds me of your candle reminds me of mustie1 videos cuz he does will it runs on all kinds of stuff and then he does a lot of other random projects on there your camera reminds me a lot of his which is a good thing it's different why when I found you I have binge watch all your previous videos you do a great job you really do thank you for the hard work you put in your videos for us much much appreciated. Thank you and have a great evening

Wow you got a lot done ! Great seeing it on four tires.Thank you for the video. All my best. Liked,shared.

When that fender well fell, I almost soiled myself! I thought, for a second, the whole truck fell on you. Glad you survived!

Gonna be awesome seeing that old truck drive out of its grave !

This is an epic series

Excellent video Chad :) soon have up running and driving to when needed to also !

You must get a lot of people saying why don't you do it this way or why don't you do it that way but you know what you're doing keep it up I like it.

Well done. You bringing it back.

Well done. Really enjoy your vlogs. Thank you.

Not a bad job for one man in the back woods of Tennessee! I haven't seen an old bumper jack like that used in 45 years or so, loved it! Good times!

Brilliant stuff, very enjoyable. Regards from Sheffield UK. Alec

This Guy is doing such a great job👏

This truck brought me to your channel and now im a subscriber. I totally get what your doing here and i think its awesome. Keep up the good work. Cant wait to see it run and drive from its grave.

It's so peaceful out in the woods! Except when that crazy guy comes out and hammers on them old pickup trucks :-)))))

Looks like she’s ready to roll! Careful with those rusty edges, LockJaw might bite. Your doing a good job bringing her back around. Can’t wait to see her run and drive.

After watching this series I don’t feel so bad about my rusty Chevy, Fantastic videos thank you

Buddy you earned my subscription. This is some major dedication.

This type of project uses all of your mechanic skills. And seeing all of them is why I'm watching this series. Keep it 100% country. GOD BLESS!!

Looking forward to seeing her go. I give you credit, she’s in tough shape.

Good video and a propane torch will take care of them frozen up brake lines just about everytime. A little helpful hint there brother.....

Good job on that old truck putting it back together.

Just found your channel. This is hilarious I've often wondered if such a dilapidated vehicle could be put back together and driven. I'll be following this.

Thanks for another , Brother !

If u ever have to do that again with those control arms a ratchet strap works great for winching crap like that in place without loosing fingers

If it was me, I'd have fixed the red one, but this is commitment!

keep up the good work man i really enjoyed the thigs you are doing (i am a mechanic myself) keep it simple and real :)

10 out of 10 for effort Chad👍👍 I have to admit, I thought you were bonkers when you first mooted the idea of driving Lockjaw out the woods. But now, in the words of The Monkees, I'm a Believer🤣🤣 Yet another fantastic series of videos from you👍

I love this channel. For future reference, your phone really did do a nice job.

The old rusty heap is fightin you every step of the way. Can’t wait to see her drive out of the woods!

Wholly crap, that truck you took the steering knuckles off of looks better than the one your putting them on.🇺🇲😀👍

Man that's cool at least you are givin' her it's last chance. even if it needs a complete new body. still fun project.

I haven't seen a farm jack like that in many a year. They are great for everything.

love the persistence and make-do approach. Sub'd

Hard hard. Work. Good. Luck. My. Friend

half crazy? lol glad you having fun doing it fun watching i live in tn also so i know you hot out there doin it thanks for the content fun to watch

A great educational video. Only thing I worried about is the farm jack. I had a bad experience with one. Please be careful with them things.

This is fantastic. When his truck is done find some other piece of classic American steel and do the same thing. Forever

53:09 I love those little gas scooters.

Enjoying this truuuuk and it's progress back to life. What are you going to do with it? How many days in the making of the videos so far? I can agree with you about being in the country - I like nothing better than going out into the bush and listening to silence, the sounds of Africa and the voices in my head!

Can’t wait to see it come out of the woods

Roc-a-toe parts ! Love it 👍

You are a mad man, but it's entertaining keep up the good work

Man, you're good!

Your determination is truly outstanding verging on amazing ,,but do see your long term plan , wish had same place and space! to do the exact same tis so frustrating..

Man are u ok no. Very nice work 👍👍👍👍👍😊

Out of all the "will it run and drive channels This N That Garage says...hold my beer. lol

Man is this truck rough but I like it.

That ole girl is gonna be like Christine driving out of those woods. CHEVROLET STRONG 💪

Thanks!

I think you should have started with the red truck that the rear end was in

I think this is nice...because I do this heap of junk thing too. Got me a fully dismantlet c10 and now i'm putting it back together piece by piece. No-one wound have believe that it'll run ever again, I'll pro em wrong ;)

Love a man with a plan (...) And I like this wood preservation project, it's all about nature these days and all that sweat and elbow grease you put in it seams pretty natural to me 💪🤣

That's a fine looking chef lol you can fix it lol

Love your channel

Big fan of your hard work. DD speed shop has a grandpa it’s gotta be you. 👍

My favorite rear truck axle. Corporate 14 bolt full floater.

You are a crazy man.... BUT, I like watching you! Keep at it brother! :)

You got that good looking truck off the ground that's wonderful .wonderful video look forward to the next one and by the way you never did say if it was redneck tetness or regular ? 🤣 You need to wax it when you get it out of the woods.......

Nuckin Futs man, yall are killin me hope you don't get too many ticks

I remember being young and wondering about a grown-up all by their self talking to no one but carrying on like you. Funny thing is in the 70s there was no internet. Or was there

Whole new definition to literally running and driving out of the woods

Great video...

The truck might need just a little help, but that grill looks really good. Lol

Hello Mr Chad! First off, thank you for being such a genuine individual that (imo) is willing to share your knowledge in such a humble way! I have a non-mechanical related question. I was wonderin'. What do you wear/apply/spray on to be able to work in the woods, like that? I'm surprised at the fact that it's summertime in Tennessee, which equals hot n sweaty, yet I haven't seen you swat one skeeter. Being the resourceful American that you are, I imagine that you have some magic potion ya brew up. Whatever it is, can ya let us know?

Man that poor old truck needs some serious fabrication.

I use to work for a company and the owner always glazed his rotors and we had to clean them up we used a die grinder and cleaned them up yoy can hit both sides as long as the calipers are off

Your one tough man..

You should take the door off the red truck put it on the white one. Awesome job

Very good video