Hello Wolfgang, Just finished this Tutorial. Nice to hear the audible commentary as I work along with you. Thank you much. Cheers!
@wolfgang.walden.cad.training5 жыл бұрын
You´re welcome as always :)
@querrythis3 жыл бұрын
Remarkable catia knowledge. Many thanks for sharing.
@wolfgang.walden.cad.training3 жыл бұрын
Thanks :)
@arjangbijani96403 жыл бұрын
Most professional videos in youtube!! Thanks
@wolfgang.walden.cad.training3 жыл бұрын
:) you´re welcome
@ismarekathakusuma7 жыл бұрын
best catia tutorial i found in youtube
@wolfgang.walden.cad.training7 жыл бұрын
Thanks for your praise :)
@letterpower08028 жыл бұрын
Thanks for instructing gsd. I could know pattern's fuction newly.
@outmanassamar54904 жыл бұрын
Ihre Vedios sind richtig hilfreich
@wolfgang.walden.cad.training4 жыл бұрын
Freut mich!
@JM-oe5vf7 жыл бұрын
Great tutorial Sir. Thank you for your share! Very appreciate all your work
@wolfgang.walden.cad.training7 жыл бұрын
Thanks, you ´re welcome.
@superberbere7412 жыл бұрын
Excellent video ! Thank you !
@wolfgang.walden.cad.training2 жыл бұрын
Thanks, you´re welcome.
@farhadniky28327 жыл бұрын
Hi Wolfgang Walden this is a nice part and quality of video is better than the old onecould you please change some of your videos to hd and audio. thank you for your incredible job.
@wolfgang.walden.cad.training7 жыл бұрын
Hi, as I already have mentioned many times - I will try to "redo" all the old ones ;)
@lebach14677 жыл бұрын
Hey thank for your videos. It really helps me so much.
@wolfgang.walden.cad.training7 жыл бұрын
You´re welcome :)
@ashishkhule51604 жыл бұрын
Great tutorial Sir, Thanks for the Sharing
@wolfgang.walden.cad.training4 жыл бұрын
You´re welcome
@harish7424 жыл бұрын
Very much resourceful... Thank you sir.
@wolfgang.walden.cad.training4 жыл бұрын
you´re welcome
@selcuk42033 жыл бұрын
You are great man. I am waiting delmia education videos from u
@wolfgang.walden.cad.training3 жыл бұрын
Sorry I don´t do delmia, at least not yet.
@selcuk42033 жыл бұрын
@@wolfgang.walden.cad.training I looked for delmia video on youtube but ı found a little video about it
@SaddamHussain-jp6wz2 жыл бұрын
Great work ✌️
@wolfgang.walden.cad.training2 жыл бұрын
thanks :)
@buyixiaopi9 жыл бұрын
‘impossible situation’ , this problem because, there has interactin between each branch pipe, so increase the distance of each branch pipes. can solve the problem
@wolfgang.walden.cad.training9 жыл бұрын
FENG ZHOU Yes, of course if you increase the distance this could solve some problems.
@vedantvashee7638 жыл бұрын
+Wolfgang Walden But sir, i am taking the same dimension from your drawing and still it is giving an error to me, whereas the case is not same on your part.. Why??
@wolfgang.walden.cad.training8 жыл бұрын
+Vedant Vashee Hi, depending on Release and Servicepack this may occur. Just check the answers down below.
@MrKarol0012 жыл бұрын
Hi Wolfgang, I would like to ask which program do you think is best for a beginner who will not devote himself to creating full time but still needs to draw parts for production (only with a small subsequent adjustments from the manufacturer). In terms of ease of learning, intuitive program and usability of the result. Autodesk AutoCAD, Inventor or Catia, or something else? I learned a little in Inventor, but as a beginner, it bothers me how complicated simple operations such as moving or rotating an object are. Moving an object in copy mode goes great in moving mode is terribly wrong. Maybe I have a lot of sketches in one layer, maybe it's just because I'm learning a new thing. Thanks.
@wolfgang.walden.cad.training2 жыл бұрын
Try Fusion 360 also from Autodesk, you can get a free licence. It is very similar to Inventor. Of course the superior programs are Siemens NX and Catia. But for beginners I would advise to go for: 1. Inventor/Fusion 360 2. Solidworks/Onshape
@MrKarol0012 жыл бұрын
@@wolfgang.walden.cad.training Thank you very much, I really appreciate your advice. I've watched some of your videos (I'm learning some of them - for example, scaling the image to the dimensions of the sketch was great) and youtube periodically offers me more. I see that you work in different programs and the differences in them are not a problem for you.
@mertsenol60004 жыл бұрын
I could not close the surface of second cylinder which has a diameter 25 mm. and long 82*2+105. It gave the error "Impossible situation". I did everything as you did.
@wolfgang.walden.cad.training4 жыл бұрын
Obviously you did not - but - just try different dimensions.
@badigerprateek9 жыл бұрын
Hi Wolfgang @7.21 I cannot close the cylinder. I get a message saying "Impossible situation". Any idea why I get that message?
@wolfgang.walden.cad.training9 жыл бұрын
Hi, if you cannot close the surface, the boundaries of the openings/the holes are not in a plane/planar.
@badigerprateek9 жыл бұрын
Wolfgang Walden Do you mean the combined small outlets that connects to the main pipe? I followed the exact steps that you show but I get the error message. I must be doing something wrong
@wolfgang.walden.cad.training9 жыл бұрын
Prateek badiger Yes seems so. Could mail me your part - so I could check. info@wwmc.de- Which release do you use?
@badigerprateek9 жыл бұрын
Wolfgang Walden I am using V5 R19. I will email the part. Thank you.
@wolfgang.walden.cad.training9 жыл бұрын
Prateek badiger Ok, fine!
@krisssharique65163 жыл бұрын
Sir I can't do close surface of cylinder, shows me warning of updated error impossible situation. My catia version is V5.
@wolfgang.walden.cad.training3 жыл бұрын
And??? You should have noticed - I did this in catia v5. Change your dimensions.
@krisssharique65163 жыл бұрын
@@wolfgang.walden.cad.training Thanks, By changing radius of cylinder it works.
@tomaszs.50713 жыл бұрын
I had to do a similar exhaust manifold, and had to hide surfaces for there to not be remaining stuff inside the manifold. is this bad? Can I keep the surfaces hidden and it still counts as a finished product?
@wolfgang.walden.cad.training3 жыл бұрын
You could copy that manifold and paste it special in a new part.
@mody9634 жыл бұрын
Hello Wolfgang, I'm renewing my knowledge on catia and have one question. Can You somehow do a simple reuse of the colsesurface pattern from 6:13 in the pattern for holes at 21:51. For being clear I don't want to make a parameter that defines the value of 82mm and push the parameter to both patterns. I would like something of reuse existing pattern properties. Some times deep paramterization by the variable is more time consuming and it would be quicker to reuse the existing pattern properties.... One more question (if it's possible) will it work over diffrent catia modules (one pattern in sheet design and one pattern at part - both in advanced license) or If part i designed in advanced licenese in sheet pattern and then someone runs the basic license and tries to reuse the pattern from sheetdesign in part design over his basic license ? Anyway thanks for nice time with Your lessons. I appreciate Your knowledge spreading approach!
@wolfgang.walden.cad.training4 жыл бұрын
Regarding "close surface" take a look here : kzfaq.info/get/bejne/fdCfn62Q1J6lZKc.html There is no "reuse pattern" in part design or gsd, only in the assembly workbench. Where is the difference between "basic" and "advanced" licence?
@kailashvarman7702 жыл бұрын
7.12 cylindrie close surface command is not working
@wolfgang.walden.cad.training2 жыл бұрын
Two possible reasons - your joined surfaces have gaps which boundaries are not planar - or you have manifolds in your joined surfaces. Or even both.
@mohamedaminebelyamani41747 жыл бұрын
i can't seperate the PartBody and the Geometric set apart like You did , so when i want to close surface of the cylinder , it's an impossible task , any solutions ?
@wolfgang.walden.cad.training7 жыл бұрын
Change the dimensions a little bit.
@blue123456ization10 жыл бұрын
This is great!! Thanks a lot Herr Walden.How did you come up with the dimensions by the way?Are you referring any blueprints?
@wolfgang.walden.cad.training10 жыл бұрын
Thx :) - no I didn´t use a blueprint, it is just an exercise, so I could use any dimensions I want.
@blue123456ization10 жыл бұрын
Ok thx a lot!
@mertsenol60004 жыл бұрын
Dear Mr. Walden. Why do you prefer to draw your sketches in axis system?
@wolfgang.walden.cad.training4 жыл бұрын
Because the big companies used to do it in catia. Please watch my catia v5 basics videos.
@mertsenol60004 жыл бұрын
@@wolfgang.walden.cad.training thank you for reply. I am trying to watch all of your videos. because you enable me to learn too much things about devoloping myself.
@ajvanslevik85926 жыл бұрын
Great tutorial
@wolfgang.walden.cad.training6 жыл бұрын
Thanks :)
@gouseshaik78657 жыл бұрын
can u plz upload a tutaorial about "how to draw a gear with given PCD,DP,CP,OD,RD and with other notations? plz upload ASAP
@wolfgang.walden.cad.training7 жыл бұрын
LOL Please send money ASAP - just kidding - I will consider doing a video - but I´am very busy, sorry.
@klemenshuber54408 жыл бұрын
when i open the gsd, there isn't a combine tool under the plane tool. Is there any other way to open it, or a way to solve this problem ?
@wolfgang.walden.cad.training8 жыл бұрын
Hi, strange - maybe you should reset all toolbars - tools->customize->toolbars: restore all contents and restore position. If it doesn´t work - make 2 extrudes with the 2 sketches - the intersection curve would be the same.
@klemenshuber54408 жыл бұрын
Ok, thanks for the help
@fistonmusuya67587 жыл бұрын
Thx this is great job
@wolfgang.walden.cad.training7 жыл бұрын
Thanks for your praise :)
@djogi867 жыл бұрын
Dier mr. Wolfgang, I got a problem on a 7:22min. When I try to close surface I got "Impossible situation", and can not do that operation. I allso try to do this on another computer and got same error. What you think the problem is ? I hate this situation becouse I do same as you on this tutorial :(
@wolfgang.walden.cad.training7 жыл бұрын
Hi, depending on your hardware and the catia release number you should change the dimensions slightly and then it might work.
@djogi867 жыл бұрын
Whan I change diametar of cylindar on 24 or 26 everything is fine, but whan is 25 it is impossible error, :) funny. Thanks on your answer.
@pablotorres64007 жыл бұрын
Would you happen to have a drawing with measurements to print and give to a colleague? I want to give this as a challenge to him!
@wolfgang.walden.cad.training7 жыл бұрын
Sorry, but you can download the model from my GRABCAD account and do your own drawing.
@goshicrazy7 жыл бұрын
Wolfgang Walden alright ill check it out thanks!
@wolfgang.walden.cad.training7 жыл бұрын
You´re welcome.
@mislavb21218 жыл бұрын
Great tutorial!
@wolfgang.walden.cad.training8 жыл бұрын
Thx :)
@000000000000000johny5 жыл бұрын
Thanks for te awesome tutorial!
@wolfgang.walden.cad.training5 жыл бұрын
You´re welcome
@prashanthbarath29085 жыл бұрын
Nice tutorial. Would be better if you gave some clarity about the dimensioning. Its too hard to follow. Or could you please share the diagram which was used as basis of this model
@wolfgang.walden.cad.training5 жыл бұрын
Hi, this is completely made up, so the dimensions don´t really matter at all. the drawings are reserved for my paid trainings, sorry.
@ishrakkabirzesan3720 Жыл бұрын
gracias!!!!!
@wolfgang.walden.cad.training Жыл бұрын
you´re welcome
@naveenshah44667 жыл бұрын
hello. .dear. plz tell me this type of video recording software name.. so i can upload our tutorial on KZfaq. ...thanks
@wolfgang.walden.cad.training7 жыл бұрын
Hi, you could use "camtasia" - even Video2Brain and Lynda.com use it.
@thanglong1000nam7 жыл бұрын
Thanks your video.
@wolfgang.walden.cad.training7 жыл бұрын
You´re welcome
@Rashidshalchi6 жыл бұрын
Thanks, Great Video
@wolfgang.walden.cad.training6 жыл бұрын
You´re welcome.
@alisah2805 жыл бұрын
Tank you brother
@wolfgang.walden.cad.training5 жыл бұрын
you´re welcome
@vamshikrishna11036 жыл бұрын
Sir why to hide yellow axis( vertical & horizontal)
@wolfgang.walden.cad.training6 жыл бұрын
You should view my catia v5 basics videos first - kzfaq.info/get/bejne/q56FqtOZxLTXdYk.html
@gouseshaik78657 жыл бұрын
tnq u 4 ur tutorial
@wolfgang.walden.cad.training7 жыл бұрын
You ´re welcome.
@nagarajudandu8936 жыл бұрын
Why do we use parameters r formulas,relations and geometrical set and also explian me how to use them
@wolfgang.walden.cad.training6 жыл бұрын
Please watch my corresponding videos - knowledgeware & methods.
@nagarajudandu8936 жыл бұрын
Thanq for ur well support
@chandramoulimalarmannan85044 жыл бұрын
Is there any full lecture ... complete tutorial
@wolfgang.walden.cad.training4 жыл бұрын
Complete tutorial for what?
@chandramoulimalarmannan85044 жыл бұрын
@@wolfgang.walden.cad.training catia v5
@wolfgang.walden.cad.training4 жыл бұрын
Go to my blog - www.walden-wolfgang.de
@TRFLGRDLW5 жыл бұрын
Can you give link for the detailed drawings?
@wolfgang.walden.cad.training5 жыл бұрын
Sorry, there is no detailed drawing, this model is completely made up.
@trananh13744 жыл бұрын
thanks
@wolfgang.walden.cad.training4 жыл бұрын
You´re welcome
@rajeshkumarkrajsush7 жыл бұрын
This a great video for a beginner designer have you any job of a Auto CAD designer
@wolfgang.walden.cad.training7 жыл бұрын
Sorry I do only trainings, so there is no job vacancy.
@manojkulkarni37615 жыл бұрын
Where can I get 2d drawing of it?
@wolfgang.walden.cad.training5 жыл бұрын
Sorry, drawings are for my paid trainings only
@user-fn9dc4ul2q4 жыл бұрын
teacher very very thank you for teach i hope you healthy anyway when time of 7min 19seconds , appear to me ( part1 \partbody\closesurface.2 impossible situation) how to i haver to solve this?? could you teach to me ? i am first starter catia low level elementry level so very very i need to solve this and detaily tell me please yours way of detaily technich telling to t his problem , really i want be like you as mecanic engineer
@wolfgang.walden.cad.training4 жыл бұрын
Sorry, can´t tell because I´m not a clairvoyant. Anyway I would strongly advise you to start with the basics and proceed to the more difficult exercises like this later on. Go to my website and look for basic part design - start with 1.3 kontur 2. www.walden-wolfgang.de/2016/07/20/catia-v5v6-partdesign/
@vishalvictorgokavi84304 жыл бұрын
Awesome , Dear are you from Australia
@wolfgang.walden.cad.training4 жыл бұрын
thanks, I´m from Bavaria/Germany :)
@naveenshah44667 жыл бұрын
thanks.
@user-jg7qi2pm6b7 жыл бұрын
고맙습니다.
@wolfgang.walden.cad.training7 жыл бұрын
You´re wlecome :)
@ffernando138 жыл бұрын
Great!! are u Deutcher?? Do u have Facebook page? thx
@wolfgang.walden.cad.training8 жыл бұрын
Hi, yes I´m a native german - and I got a facebook page as well - the link is in the channel-banner.
@mojtaba.moghimi787 Жыл бұрын
Perfect😉
@wolfgang.walden.cad.training Жыл бұрын
Thanks again 🙂
@Dzevad7510 жыл бұрын
thanks for this tutorial, nice lol :)
@ro-tech12923 жыл бұрын
Cool!!!!!!
@wolfgang.walden.cad.training3 жыл бұрын
:) thanks
@krishnamoorthi63737 жыл бұрын
r thank you
@wolfgang.walden.cad.training7 жыл бұрын
You ´re welcome.
@TOOLENGAGED7 жыл бұрын
OMG !! this is a really inefficient CAD program!!! I can do this part in 8 minutes with other CAD software.
@wolfgang.walden.cad.training7 жыл бұрын
HI, it is just an exercise. Of course, you can do something similar in less time