ACCORD Euro CL9 | HDi Cold Air Intake install
Рет қаралды 4,436
Күн бұрынInstalling a HDi Cold Air Intake install on a CL9 Accord Euro
@salesteamhdi2334 Күн бұрын
That is such a detailed video what is the size of the coolant tube we can send you a U tube if that makes it better again thanks for the video very useful !!
@ShreyPatel-bx9tu Ай бұрын
I couldn't get the screw off for the air box any help on how I could get the screws off?
@ToughGarage Ай бұрын
@@ShreyPatel-bx9tu which screw do you mean
@lil_Smoothz 3 ай бұрын
Very useful video..!😊
@ToughGarage 3 ай бұрын
Glad you enjoyed it
@TURBOTRISTO Жыл бұрын
i also did a video on this on my cl9 racecar, for a lot less than this one costs, hgreat video though mate, its a simple fun mod anyone can DIY
@mozzi7359 3 ай бұрын
does this specific intake work on the 2007?
@ToughGarage 3 ай бұрын
Yes, the car in the video is a 2007 CL9
@vividanodic1199 Жыл бұрын
I'm about to order this kit myself, what size filter fits the piping? I can't tell if it's 2.5 or 3 inch
@ToughGarage Жыл бұрын
Its 3", from memory. But best is to receive the kit and measure it or call hdi
@vividanodic1199 Жыл бұрын
@@ToughGarage Do you recon it would be right to just leave the 2 pipes connected instead of separating them until I could do it properly? The ones you cut apart
@ToughGarage Жыл бұрын
@@vividanodic1199 i think the best way is to buy some hose in the right diameter and run them jnstead of going through the metal pipes. To try and use the pipes connected would be very difficult to route neatly without kinking the hoses
@emperfx3038 4 ай бұрын
hey bro do you know the size of that silicone hose?
@ToughGarage 3 ай бұрын
Do you mean the silicone joiners or the smaller hoses?
@emperfx3038 3 ай бұрын
@@ToughGarage smaller hose, i just installed everything but i dont have a hose to connect to my crank case vent haha
@ToughGarage 3 ай бұрын
@@emperfx3038 it should have come in the kit if you bought you HDi one. I will check tomorrow and get back to you
@emperfx3038 3 ай бұрын
@@ToughGarage all good mate i just measured the the inside diameter of the stock tubing and ordered that size hose. anyways thanks for replying mate 🙏🏽
@Michael-gf7cj Жыл бұрын
Hey mate can I have a link to where you bought it?
@ToughGarage Жыл бұрын
www.performanceheaven.com.au/products/hdi-cl9-cold-air-intake-piping-kit?_pos=1&_sid=12172719a&_ss=r
@fletchermaclean4071 7 ай бұрын
I'm thinking about buying this kit and I was wondering did you ever come into any issues with it?
@ToughGarage 7 ай бұрын
None at all so far
@StaunchTrooper Жыл бұрын
Chicks don't dig turbos, only leather....
My Everyday D.I.Y.
Рет қаралды 62 М.
Henan Ling Heng Machinery Co., Ltd.
Рет қаралды 30 МЛН
PRO-механика
Рет қаралды 3,3 МЛН