Thanks

Thanks!

Nitecore HC65 💪

I had to cut some of my outdoor shots out to keep it under 20 min. I did film that though.

@@LiquidRetro I see, well maybe next time.

Does green not also work for your needs? Why do you need red instead of green?

Awesome!

Yes it should be but at a reduced output

I don't believe they say. Check the spec sheet on acebeams website, maybe it's been updated

I figured out what it is. It's the emisar D4. The D4V2 is the current model, tons of led options. It's not a headlamp though

Yes I believe so but don't remember the details, it's been a while

I ordered a red and UV accessory light because I occasionally explore northern michigan. Being able to spot yooperlite rocks with the UV emitter will be exciting to try, and if I'm ever in the area, maybe even spot scorpions if I'm on the western side of the US. If I need to look around my campsite at night, I will try to use the red emitter to not disturb my neighbors. This might not work too well as the beam shot showed the red might be a bit excessive. I agree with a clip, but I will possibly make more use out of it if the light had a magnetic tailcap, the review video was really helpful as it gave me a look at what was inside the caps. I just wanted to reply to a couple of the possible issues you brought up

It just looks heavy, but it's not. This weight is ok for me, I am a 27-year-old lady. and I often use it when I run in the morning

My most used headlamp is still my Armytek wizard pro, but usually on the lower modes.

Sorry I don't quite understand.

@@LiquidRetro Good afternoon. I'll try to explain in more detail. While charging my flashlight, one of the electronic components burned out, which are located on the board where the charging connector is. The translucent glass can be removed. I took off my glass, but because of that the radio component burned out, its marking is not visible. could you take off your glass and write what markings on the radio components are indicated. I want to find a burnt part by marking and solder it. Thanks a lot!

I only use Button Top 21700 Protected cells. But yes, flat top 21700 will work.

@@ToddTinley Flat top protected or unprotected? Thanks again for your reply.

I don't think mine does this but it makes sense if the battery is old, near low, or can't meet the Amp requirements.

@@LiquidRetro No, no but i have heard a lot of opinions, when the people were using a original new battery. That's weird.

greetings from Poland, u r doing nice job with ur torches reviews.

I would contact support about that. Have you ever taken a multimeter to the charged battery?

Jon M I’ll contact them, but no don’t own a multi meter.

Jon M Hey Jon, so what reading should I see if I used a multi meter, might have access to one.

To see what the battery voltage is if fully charged. My guess would be its either not fully charged or there is a problem with the protection circuit

Jon M so my question is what should the reading say if it’s fully charged?

It really depends on individual use cases and scenarios. Green is said to make following blood trailers easier for hunters, some people like red for better night vision (although very low sub lumen white does just as well), uv can be good for finding scorpions, etc. Really depends on the application.

Thank you for your quick response! Your video was excellent. Very informative. What is the Nichia ?cri?

@@Harry91097 nichia cri is usually 5000 k.

It's a little better with a phone as a load, the static load is linear, your phone isn't.

Thanks

Which Fenix, thry make a lot of lights.

@@LiquidRetro which fenix light is closest in performance? I own 2 fenix lights and am looking for something in 21700

@@phoenix4ever367 I don't have a Fenix headlamp to compare it to.

@@LiquidRetro ok. Thx for the response 👍

What do you mean when you say afterglow? I have not tested that Fenix unfortunately

I thought how much has the AceBeam H30 maximum afterglow distance if the afterglow distance of 171m as indicated by the manufacturer?

@@DanielSir-ng1tv do you mean throw?

I think how far the light beam reaches, I do not know if we understand. I do not speak English very well

@@DanielSir-ng1tv sounds like you might be talking about throw. Acebeam numbers are usually correct but make sure your lookiig at the lower modes too as thats what the light will sustain for longer. Headlamps in general are floody thus throw less.

I believe so, but only to low mode

@@LiquidRetro thanks for the very fast response.. but if u r not sure 100% percent, do u mind if u try it please.. coz this is the only thing stoping me of buying it

A higher drain battery is needed for best performance

@@LiquidRetro How much amp do you need for best preforming?

Given the shorter turbo runtime here it probably doesn't matter if your after longer run times. Just make sure you get legit cells. Without going back and reviewing the review I can't remember if this needs the manufacturers cell or not

?

I have only tried the H30. I still own and use it.

Check the runtime section again or my blog (link in the description) both should have that listed.

@@LiquidRetro i havent understand perfectly what have you said in the video about turbo mode.. Sorry im not very good speeking in english.. i just what ti know if the lamp dims in turbo mode after some minutes

@@rik3gs it will, all high output lights do.

Off the top of my head I don't remember which version it is. I should say in the review. As for purchase that depends on where you are. A quick Google search is showing me mostly neutral white models at most of my favorite retailers. It's what I prefer

@@LiquidRetro okay thank you for the info. i will try the 5000k + Uv.