Acebeam H50 v2.0 Review - Flood and throw beam outdoor headlamp with long runtimes

Рет қаралды 7,226

Күн бұрын

Hello KZfaq, Flashlight Enthusiast here! Acebeam H50 v2.0 is an upgraded version of dual beam outdoor headlamp, being 3rd most powerfull headlamp in Acebeam's portfolio. Featuring 3x SST20 5000K and two channels (Flood and Throw) it is perfect for long distance runners or cave exploring. Enjoy!
Table of content:
0:00 Intro
0:42 Box and content
1:49 Headstrap & mount
2:35 Design
4:08 Battery
4:32 UI overview
5:47 Mode memory and lockout
6:35 Battery indicator
6:58 Charging
7:20 Lumen levels
7:28 Turbo runtime graph
8:33 High runtime graph
9:04 Mid runtime graph
9:52 Flashlights for comparison
10:28 Beamshots ;)
16:14 Summary

Пікірлер: 27

@markpettie681 Жыл бұрын

BTW, I'm loving those Armteks!! Thank you for showing what all these headlamps can do!!

@FlashlightEnthusiast Жыл бұрын

My pleasure

@markpettie681 Жыл бұрын

I like it! Great review bro!!

@FlashlightEnthusiast Жыл бұрын

Thank you!

@philpowell1162 6 ай бұрын

Acebeam are getting better quality in there flashlights

@FlashlightEnthusiast 6 ай бұрын

Better and better, indeed

@afanasyev_r Жыл бұрын

thank you for your review, i was waiting for that over 6 month

@FlashlightEnthusiast Жыл бұрын

I don't know why there were no reviews up to date. Glad I could help

@afanasyev_r Жыл бұрын

@@FlashlightEnthusiast i think this is because floodlight and spotlight are almost the same and acebeam choosed strange output regimes for that, so people not intersted in that. Its like sofirn hs20 - not great light, but sofirn hd15 is one of bestseller.

@FlashlightEnthusiast Жыл бұрын

Might be true, not every model is a successful one

@TopDog8762 Жыл бұрын

Impressive

@FlashlightEnthusiast Жыл бұрын

You can find Acebeam H50 v2.0 headlamp here: bit.ly/3PxM68z

@davidpetroczy1603 Жыл бұрын

Hi Flashlight Enthusiast, what if you restart the light after the 2 hour stepdown started? Does it revert back to higher output, or starts at the decreased level? Thanks

@FlashlightEnthusiast Жыл бұрын

Hi, as it uses the linear driver, it will not boost the output as the battery discharges. So after 2h If you reset the light, it will provide max brightness at this moment, yet lower than at 100% battery

@davidpetroczy1603 Жыл бұрын

Thanks for the response. For me, this curve doesn’t look like a linear driver, otherwise how can it maintain (even increase a bit) brightness for two hours? When I first looked at it, it seemed like a conscious decision on Acebeam’s side. I may be wrong

@adriandebowski5379 Жыл бұрын

Ciekawe, czy wygodny. Jednego swojego Armyteka wkładam do opaski po wurkkosie, bo plastik z oryginalnej opaski wbija mi się w czoło.

@FlashlightEnthusiast Жыл бұрын

Wygodny jak najbardziej, nie wbija się w czoło. H30 ma częściowo plastikowy ze względu na masę czołówki. To mocno indywidualna kwestia, mi np opaska AT zupełnie nie przeszkadza, a ta od H30 czasem się wbija w skórę. Pozdrawiam serdecznie

@sentinel7122 Жыл бұрын

I agree... not worth it. That's some pretty mediocre output sustainment, I'd expect better from Acebeam. Maybe their mistake was the dual-flood LEDs or going with the SST20 instead of something else? I do appreciate the warm white temp though, it's so much nicer for a headlamp than cool white. I'd like to see how the beam profile and output data of the Fenix HM65R-T stack up to this. It also does flood/spot simultaneously in the 18650 form factor. MSRP is higher, but street price is pretty much equal.

@sentinel7122 Жыл бұрын

Oh and thanks for the review, of course! Very helpful. I was considering this as a new MTB helmet light, but was waiting to see what the graphs looked like in real world use.

@FlashlightEnthusiast Жыл бұрын

Glad I could help make a decision about that 😃

@davidpetroczy1603 Жыл бұрын

Hi @Sentinel7, I have both the Fenix HM65R-T and the Acebeam H50 2.0 along with many other headlamps. One of my favourits is the Acebeam. The Fenix has a time step-down built in, which I hate. The Acebeam doesn’t look good on paper, but the output reduction is temperature based. With a fan even on lowest setting turned on close to it, dramatically increases higher output durations based on my tests. The only problem is that the sensor only adjusts the light output one way. While so many lights increase brightness once they cool down (Nitecores for example) the Acebeam has to be switched to the desired mode again. If there was a way to increase the temp threshold by 5-10 degrees celsius (or disable the sensor 😅 ) it would really be one of the best headlamps. The beam profile is actually very good, I think better than most. Some say that the spot is similar to the flood beam, but it’s not entirely true. The spot also has a nice spill, so walking and running is easy, as you also see the stuff in front of you. If you want big difference between the two beams, go with the Fenix or the Cyansky HS6R for example. Hope I could help.

@minicomma Жыл бұрын

Nice video; thank you so much, but I will not buy it. I expected a little better from Acebeam, as they do have great products in general This one is a fail.

@FlashlightEnthusiast Жыл бұрын

Thank you for your comment, appreciate the support

@haneiev Жыл бұрын

I think that this particular model is not worth buying. Yes, it is nice-looking and has intuitive UI. But the performance is awful and no stabilization. I think that the reason is that Acebeam used AMC7135 instead of usual for them high efficient constant current driver.

@FlashlightEnthusiast Жыл бұрын

Thanks for your view! It definitely seem disappointing...

@minicomma Жыл бұрын

Not even at half price, I would not choose this one.

@FlashlightEnthusiast Жыл бұрын

Is it sustainable output, beam profile, linear brightness decrease or sth else?